12 Principles of Green Chemistry

Sam Higginbottom Institute of Agriculture, Technology and Sciences

1. Sam Higginbottom Institute of Agriculture, Technology and Sciences

2. The Twelve Principles of Green Chemistry

3. G reen chemistry definition Definition  of  green chemistry .  Green chemistry  is the design of  chemical  products and processes that reduce or eliminate the use or generation of hazardous substances.  Green chemistry  applies across the life cycle of a  chemical  product, including its design, manufacture, use, and ultimate disposal.

4. 12 Principles of Green Chemistry 1. Prevention . It is better to prevent waste than to treat or clean up waste after it is formed. 2. Atom Economy . Synthetic methods should be designed to maximize the incorporation of all materials used in the process into the final product. 3. Less Hazardous Chemical Synthesis . Whenever practicable, synthetic methodologies should be designed to use and generate substances that possess little or no toxicity to human health and the environment. 4. Designing Safer Chemicals . Chemical products should be designed to preserve efficacy of the function while reducing toxicity. 5. Safer Solvents and Auxiliaries . The use of auxiliary substances (solvents, separation agents, etc.) should be made unnecessary whenever possible and, when used, innocuous. 6. Design for Energy Efficiency . Energy requirements should be recognized for their environmental and economic impacts and should be minimized. Synthetic methods should be conducted at ambient temperature and pressure. 7. Use of Renewable Feedstocks . A raw material or feedstock should be renewable rather than depleting whenever technically and economically practical. 8. Reduce Derivatives . Unnecessary derivatization (blocking group, protection/deprotection, temporary modification of physical/chemical processes) should be avoided whenever possible . 9. Catalysis . Catalytic reagents (as selective as possible) are superior to stoichiometric reagents. 10. Design for Degradation . Chemical products should be designed so that at the end of their function they do not persist in the environment and instead break down into innocuous degradation products. 11. Real-time Analysis for Pollution Prevention . Analytical methodologies need to be further developed to allow for real-time in-process monitoring and control prior to the formation of hazardous substances. 12. Inherently Safer Chemistry for Accident Prevention . Substance and the form of a substance used in a chemical process should be chosen so as to minimize the potential for chemical accidents, including releases, explosions, and fires. Anastas, P. T.; Warner, J.C. Green Chemistry: Theory and Practice, Oxford University Press,1998.

5. 1. Prevention It is better to prevent waste than to treat or clean up waste after it is formed.

6. Environmental Disasters Love Canal in Niagara Falls, NY a chemical and plastics company had used an old canal bed as a chemical dump from 1930s to 1950s. The land was then used for a new school and housing track. The chemicals leaked through a clay cap that sealed the dump. It was contaminated with at least 82 chemicals (benzene, chlorinated hydrocarbons, dioxin). Health effects of the people living there included: high birth defect incidence and siezure-inducing nervous disease among the children. http://ublib.buffalo.edu/libraries/projects/lovecanal/

7. Environmental Disasters Cuyahoga River – Cleveland, Ohio There were many things being dumped in the river such as: gasoline, oil, paint, and metals. The river was called " a rainbow of many different colors ". Fires erupted on the river several times before June 22, 1969, when a river fire captured national attention when Time Magazine reported it. Some river! Chocolate-brown, oily, bubbling with subsurface gases, it oozes rather than flows. "Anyone who falls into the Cuyahoga does not drown," Cleveland's citizens joke grimly. "He decays." Time Magazine, August 1969

8. 2. Atom Economy Synthetic methods should be designed to maximize the incorporation of all materials used in the process into the final product.

9. Organic Chemistry & Percent Yield Epoxidation of an alkene using a peroxyacid 100% yield

10. Percent yield:  

11. Balanced Reactions Balanced chemical reaction of the epoxidation of styrene

12. Atom Economy:   Trost, Barry M., The Atom Economy-A Search for Synthetic Efficiency. Science 1991 , 254 , 1471-1477.

13. Atom Economy Balanced chemical reaction of the epoxidation of styrene Assume 100% yield. 100% of the desired epoxide product is recovered. 100% formation of the co-product: m-chlorobenzoic acid A.E. of this reaction is 23%. 77% of the products are waste.

14. 3. Less Hazardous Chemical Synthesis Whenever practicable, synthetic methodologies should be designed to use and generate substances that possess little or no toxicity to human health and the environment.

15. Less Hazardous Chemical Synthesis Disadvantages phosgene is highly toxic, corrosive requires large amount of CH 2 Cl 2 polycarbonate contaminated with Cl impurities Polycarbonate Synthesis: Phosgene Process

16. Less Hazardous Chemical Synthesis Advantages diphenylcarbonate synthesized without phosgene eliminates use of CH 2 Cl 2 higher-quality polycarbonates Komiya et al., Asahi Chemical Industry Co. Polycarbonate Synthesis: Solid-State Process

17. 4. Designing Safer Chemicals Chemical products should be designed to preserve efficacy of the function while reducing toxicity.

18. Designing Safer Chemicals Case Study: Antifoulants (Marine Pesticides) http://academic.scranton.edu/faculty/CANNM1/environmentalmodule.html

19. Designing Safer Chemicals: Case Study: Antifoulants http://academic.scranton.edu/faculty/CANNM1/environmentalmodule.html Antifoulants are generally dispersed in the paint as it is applied to the hull.  Organotin compounds have traditionally been used, particularly tributyltin oxide (TBTO). TBTO works by gradually leaching from the hull killing the fouling organisms in the surrounding area TBTO and other organotin antifoulants have long half-lives in the environment (half-life of TBTO in seawater is > 6 months). They also bioconcentrate in marine organisms (the concentration of TBTO in marine organisms to be 104 times greater than in the surrounding water). Organotin compounds are chronically toxic to marine life and can enter food chain. They are bioaccumulative.

20. Designing Safer Chemicals: Case Study: Antifoulants Sea-Nine ® 211 http://www.rohmhaas.com/seanine/index.html Rohm and Haas Presidential Green Chemistry Challenge Award, 1996  The active ingredient in Sea-Nine ® 211, 4,5-dichloro-2- n -octyl-4-isothiazolin-3-one (DCOI),  is a member of the isothiazolone family of antifoulants. http://academic.scranton.edu/faculty/CANNM1/environmentalmodule.html

21. Designing Safer Chemicals: Case Study: Antifoulants Sea-Nine ® 211 works by maintaining a hostile growing environment for marine organisms. When organisms attach to the hull (treated with DCOI), proteins at the point of attachment with the hull react with the DCOI.  This reaction with the DCOI prevents the use of these proteins for other metabolic processes. The organism thus detaches itself and searches for a more hospitable surface on which to grow. Only organisms attached to hull of ship are exposed to toxic levels of DCOI. Readily biodegrades once leached from ship (half-life is less than one hour in sea water). http://academic.scranton.edu/faculty/CANNM1/environmentalmodule.html

22. 5. Safer Solvents and Auxiliaries The use of auxiliary substances (solvents, separation agents, etc.) should be made unnecessary whenever possible and, when used, innocuous.

23. Safer Solvents Solvent Substitution Water as a solvent New solvents Ionic liquids Supercritical fluids

24. Preferred Useable Undesirable Water Cyclohexane Pentane Acetone Heptane Hexane(s) Ethanol Toluene Di-isopropyl ether 2-Propanol Methylcyclohexane Diethyl ether 1-Propanol Methyl t-butyl ether Dichloromethane Ethyl acetate Isooctane Dichloroethane Isopropyl acetate Acetonitrile Chloroform Methanol 2-MethylTHF Dimethyl formamide Methyl ethyl ketone Tetrahydrofuran N-Methylpyrrolidinone 1-Butanol Xylenes Pyridine t -Butanol Dimethyl sulfoxide Dimethyl acetate Acetic acid Dioxane Ethylene glycol Dimethoxyethane Benzene Carbon tetrachloride “Green chemistry tools to influence a medicinal chemistry and research chemistry based organization” Dunn and Perry, et. al., Green Chem., 2008, 10, 31-36 Solvent Selection

25. Red Solvent Flash point (°C) Reason Pentane -49 Very low flash point, good alternative available. Hexane(s) -23 More toxic than the alternative heptane, classified as a HAP in the US. Di-isopropyl ether -12 Very powerful peroxide former, good alternative ethers available. Diethyl ether -40 Very low flash point, good alternative ethers available. Dichloromethane n/a High volume use, regulated by EU solvent directive, classified as HAP in US. Dichloroethane 15 Carcinogen, classified as a HAP in the US. Chloroform n/a Carcinogen, classified as a HAP in the US. Dimethyl formamide 57 Toxicity, strongly regulated by EU Solvent Directive, classified as HAP in the US. N-Methylpyrrolidinone 86 Toxicity, strongly regulated by EU Solvent Directive. Pyridine 20 Carcinogenic/mutagenic/reprotoxic (CMR) category 3 carcinogen, toxicity, very low threshold limit value (TLV) for worker exposures. Dimethyl acetate 70 Toxicity, strongly regulated by EU Solvent Directive. Dioxane 12 CMR category 3 carcinogen, classified as HAP in US. Dimethoxyethane CMR category 2 carcinogen, toxicity. Benzene -11 Avoid use: CMR category 1 carcinogen, toxic to humans and environment, very low TLV (0.5 ppm), strongly regulated in EU and the US (HAP). Carbon tetrachloride n/a Avoid use: CMR category 3 carcinogen, toxic, ozone depletor , banned under the Montreal protocol, not available for large-scale use, strongly regulated in the EU and the US (HAP). “Green chemistry tools to influence a medicinal chemistry and research chemistry based organization” Dunn and Perry, et. al., Green Chem., 2008, 10, 31-36

26. Undesirable Solvent Alternative Pentane Heptane Hexane(s) Heptane Di-isopropyl ether or diethyl ether 2-MeTHF or tert -butyl methyl ether Dioxane or dimethoxyethane 2-MeTHF or tert -butyl methyl ether Chloroform, dichloroethane or carbon tetrachloride Dichloromethane Dimethyl formamide, dimethyl acetamide or N-methylpyrrolidinone Acetonitrile Pyridine Et 3 N (if pyridine is used as a base) Dichloromethane (extractions) EtOAc, MTBE, toluene, 2-MeTHF Dichloromethane (chromatography) EtOAc/heptane Benzene Toluene Solvent replacement table “Green chemistry tools to influence a medicinal chemistry and research chemistry based organization” Dunn and Perry, et. al., Green Chem., 2008, 10, 31-36

27. Pfizer’s results Use of Solvent Replacement Guide resulted in: 50% reduction in chlorinated solvent use across the whole of their research division (more than 1600 lab based synthetic organic chemists, and four scale-up facilities) during 2004-2006. Reduction in the use of an undesirable ether by 97% over the same two year period Heptane used over hexane (more toxic) and pentane (much more flammable) “Green chemistry tools to influence a medicinal chemistry and research chemistry based organization” Dunn and Perry, et. al., Green Chem., 2008, 10, 31-36

28. Safer solvents: Supercritical fluids A SCF is defined as a substance above its critical temperature (T C ) and critical pressure (P C ). The critical point represents the highest temperature and pressure at which the substance can exist as a vapor and liquid in equilibrium. http://www.chem.leeds.ac.uk/People/CMR/whatarescf.html

29. http://www.uyseg.org/greener_industry/pages/superCO2/3superCO2_coffee.htm

30. 6. Design for Energy Efficiency Energy requirements should be recognized for their environmental and economic impacts and should be minimized. Synthetic methods should be conducted at ambient temperature and pressure.

31. Energy in a chemical process Thermal (electric) Cooling (water condensers, water circulators) Distillation Equipment (lab hood) Photo Microwave Source of energy: Power plant – coal, oil, natural gas

32. Energy usage Chemicals and petroleum industries account for 50% of industrial energy usage. ~1/4 of the energy used is consumed in distillation and drying processes.

33. Alternative energy sources: Photochemical Reactions Two commercial photochemical processes (Caprolactam process & vitamin D3) Caprolactam process NOCl  NO ˙ + Cl ˙ (535nm) (c) 2010 Beyond Benign - All Rights Reserved.

34. Alternative Energy Sources: Microwave chemistry Wavelengths between 1 mm and 1 m Frequency fixed at 2.45 GHz More directed source of energy Heating rate of 10°C per second is achievable Possibility of overheating (explosions) Solvent-free conditions are possible Interaction with matter characterized by penetration depth

35. 7. Use of Renewable Feedstocks A raw material or feedstock should be renewable rather than depleting whenever technically and economically practical.

36. Petroleum Products [Hydrocarbons] Biomaterials [Carbohydrates, Proteins, Lipids] Highly Functionalized Molecules Singly Functionalized Compounds [Olefins, Alkylchlorides] Highly Functionalized Molecules

37. Polymers from Renewable Resources: Polyhydroxyalkanoates (PHAs) Fermentation of glucose in the presence of bacteria and propanoic acid (product contains 5-20% polyhydroxyvalerate) Similar to polypropene and polyethene Biodegradable (credit card) (c) 2010 Beyond Benign - All Rights Reserved.

38. Polymers from Renewable Resources: Poly(lactic acid) http://www.natureworksllc.com/corporate/nw_pack_home.asp

39. Raw Materials from Renewable Resources: The BioFine Process Paper mill sludge Levulinic acid Municipal solid waste and waste paper Agricultural residues, Waste wood Green Chemistry Challenge Award 1999 Small Business Award

40. Levulinic acid as a platform chemical DALA ( -amino levulinic acid) (non-toxic, biodegradable herbicide) Diphenolic acid Acrylic acid Succinic acid THF MTHF (fuel additive) butanediol gamma butyrolactone (c) 2010 Beyond Benign - All Rights Reserved.

41. 8. Reduce Derivatives Unnecessary derivatization (blocking group, protection/deprotection, temporary modification of physical/chemical processes) should be avoided whenever possible.

42. Protecting Groups 2 synthetic steps are added each time one is used Overall yield and atom economy will decrease “Protecting groups are used because there is no direct way to solve the problem without them.”

43. “Noncovalent Derivatives of Hydroquinone: Complexes with Trigonal Planar Tris-(N,N-Dialkyl)trimesamides” Cannon, Amy S.; Foxman, Bruce M.; Guarrera, Donna J.; Warner, John C. Crystal Growth and Design 2005 , 5(2) , 407-411. "Synthesis of Tetrahedral Carboxamide Hydrogen Bond Acceptors" Cannon, Amy S.; Jian, Tian Ying, Wang, Jun; Warner, John C. Organic Prep. And Proc. Int . 2004 36(4) , 353-359. “Synthesis of Phenylenebis(methylene)-3-carbamoylpyridinium Bromides” Zhou, Feng; Wang, Chi-Hua; Warner, John C. Organic Prep. And Proc. Int . 2004 , 36(2) , 173-177. "Noncovalent Derivatization: Green Chemistry Applications of Crystal Engineering." Cannon, Amy S.; Warner, John C. Crystal Growth and Design 2002 , 2(4) 255-257. “Non-Covalent Derivatives of Hydroquinone: Bis-(N,N-Dialkyl)Bicyclo[2.2.2]octane-1,4-dicarboxamide Complexes.” Foxman, Bruce M.; Guarrera, Pai, Ramdas; Tassa, Carlos; Donna J.; Warner, John C. Crystal Enginerering 1999 2(1), 55. “Environmentally Benign Synthesis Using Crystal Engineering: Steric Accommodation in Non-Covalent Derivatives of Hydroquinones.” Foxman, Bruce M.; Guarrera, Donna J.; Taylor, Lloyd D.; Warner, John C. Crystal Engineering. 1998 , 1 , 109. “Pollution Prevention via Molecular Recognition and Self Assembly: Non-Covalent Derivatization.” Warner, John C., in “Green Chemistry: Frontiers in Benign Chemical Synthesis and Processes.” Anastas, P. and Williamson, T. Eds., Oxford University Press, London. pp 336 - 346 . 1998 . “Non-Covalent Derivatization: Diffusion Control via Molecular Recognition and Self Assembly”. Guarrera, D. J.; Kingsley, E.; Taylor, L. D.; Warner, John C. Proceedings of the IS&T's 50th Annual Conference. The Physics and Chemistry of Imaging Systems , 537, 1997 . "Molecular Self-Assembly in the Solid State. The Combined Use of Solid State NMR and Differential Scanning Calorimetry for the Determination of Phase Constitution." Guarrera, D.; Taylor, L. D.; Warner, John. C. Chemistry of Materials 1994 , 6 , 1293. "Process and Composition for Use in Photographic Materials Containing Hydroquinones. Continuation in Part." Taylor, Lloyd D.; Warner, John. C., US Patent 5,338,644. August 16, 1994 . "Process and Composition for Use in Photographic Materials Containing Hydroquinones." Taylor, Lloyd D.; Warner, John. C., US Patent 5,177,262. January 5, 1993 . "Structural Elucidation of Solid State Phenol-Amide Complexes." Guarrera, Donna. J., Taylor, Lloyd D., Warner, John C., Proceedings of the 22nd NATAS Conference , 496 1993 . "Aromatic-Aromatic Interactions in Molecular Recognition: A Family of Artificial Receptors for Thymine that Shows Both Face-To-Face and Edge-To-Face Orientations." Muehldorf, A. V.; Van Engen, D.; Warner, J. C.; Hamilton, A. D., J. Am. Chem. Soc. , 1988 , 110 , 6561. Publications Entropic Control in Materials Design NonCovalent Derivatization

44. 9. Catalysis Catalytic reagents (as selective as possible) are superior to stoichiometric reagents.

45. Heterogeneous vs Homogenous Distinct solid phase Readily separated Readily regenerated & recycled Rates not as fast Diffusion limited Sensitive to poisons Lower selectivity Long service life High energy process Poor mechanistic understanding Same phase as rxn medium Difficult to separate Expensive and/or difficult to separate Very high rates Not diffusion controlled Robust to poisons High selectivity Short service life Mild conditions Mechanisms well understood

46. Heterogeneous vs Homogenous Distinct solid phase Readily separated Readily regenerated & recycled Rates not as fast Diffusion limited Sensitive to poisons Lower selectivity Long service life High energy process Poor mechanistic understanding Same phase as rxn medium Difficult to separate Expensive and/or difficult to separate Very high rates Not diffusion controlled Robust to poisons High selectivity Short service life Mild conditions Mechanisms well understood Green catalyst

47. Biocatalysis Enzymes or whole-cell microorganisms Benefits Fast rxns due to correct orientations Orientation of site gives high stereospecificity Substrate specificity Water soluble Naturally occurring Moderate conditions Possibility for tandem rxns (one-pot)

48. 10. Design for Degradation Chemical products should be designed so that at the end of their function they do not persist in the environment and instead break down into innocuous degradation products.

49. Persistence Early examples: Sulfonated detergents Alkylbenzene sulfonates – 1950’s & 60’s Foam in sewage plants, rivers and streams Persistence was due to long alkyl chain Introduction of alkene group into the chain increased degradation Chlorofluorocarbons (CFCs) Do not break down, persist in atmosphere and contribute to destruction of ozone layer DDT Bioaccumulate and cause thinning of egg shells

50. Degradation of Polymers: Polylactic Acid Manufactured from renewable resources Corn or wheat; agricultural waste in future Uses 20-50% fewer fossil fuels than conventional plastics PLA products can be recycled or composted Cargill Dow

51. 11. Real-time Analysis for Pollution Prevention Analytical methodologies need to be further developed to allow for real-time in-process monitoring and control prior to the formation of hazardous substances.

52. Real time analysis for a chemist is the process of “checking the progress of chemical reactions as it happens.” Knowing when your product is “done” can save a lot of waste, time and energy!

53. Analyzing a Reaction What do you need to know, how do you get this information and how long does it take to get it?

54. 12. Inherently Safer Chemistry for Accident Prevention Substance and the form of a substance used in a chemical process should be chosen so as to minimize the potential for chemical accidents, including releases, explosions, and fires.

55. 12. Inherently Safer Chemistry for Accident Prevention Tragedy in Bhopal, India - 1984 In arguably the worst industrial accident in history, 40 tons of methyl isocyanate were accidentally released when a holding tank overheated at a Union Carbide pesticide plant, located in the heart of the city of Bhopal. 15,000 people died and hundreds of thousands more were injured. Chemists try to avoid things that explode, light on fire, are air-sensitive, etc. In the “real world” when these things happen, lives are lost.

56. Bhopal, India December 3, 1984 – poison gas leaked from a Union Carbide factory, killing thousands instantly and injuring many more (many of who died later of exposure). Up to 20,000 people have died as a result of exposure (3-8,000 instantly). More than 120,000 still suffer from ailments caused by exposure What happened? Methyl isocyanate – used to make pesticides was being stored in large quantities on-site at the plant Methyl isocyanate is highly reactive, exothermic molecule Most safety systems either failed or were inoperative Water was released into the tank holding the methyl isocyanate The reaction occurred and the methyl isocyanate rapidly boiled producing large quantities of toxic gas.

57. Chemical Industry Accidents U.S. Public Interest Research Group Reports (April 2004) find that chemical industry has had more than 25,000 chemical accidents since 1990 More than 1,800 accidents a year or 5 a day Top 3: BP, Dow, DuPont (1/3 of the accidents)

58. R eference   "Green Chemistry" . United States Environmental Protection Agency. 2006-06-28. Retrieved 2011-03-23. Jump up^   Sheldon, R. A. ; Arends , I. W. C. E.; Hanefeld , U. (2007). "Green Chemistry and Catalysis".  doi : 10.1002/9783527611003 .  ISBN   9783527611003 . Jump up^   Clark, J. H.; Luque , R.; Matharu , A. S. (2012). "Green Chemistry, Biofuels , and Biorefinery ". Annual Review of Chemical and Biomolecular Engineering.  3 : 183–207.  doi : 10.1146/annurev-chembioeng-062011-081014 .  PMID   22468603 . Jump up^   Cernansky , R. (2015). "Chemistry: Green refill". Nature.  519  (7543): 379.  doi : 10.1038/nj7543-379a . Jump up^   Sanderson, K. (2011). "Chemistry: It's not easy being green". Nature.  469  (7328): 18.  doi : 10.1038/469018a . Jump up^   Poliakoff , M. ; Licence, P. (2007). "Sustainable technology: Green chemistry". Nature.  450  (7171): 810–812.  doi : 10.1038/450810a .  PMID   18064000 . Jump up^   Clark, J. H. (1999). "Green chemistry: Challenges and opportunities". Green Chemistry.  1 : 1.  doi : 10.1039/A807961G . Jump up^   Woodhouse, E. J.; Breyman , S. (2005). "Green chemistry as social movement?". Science, Technology, & Human Values.  30  (2): 199–222.  doi : 10.1177/0162243904271726 . ^  Jump up to: a   b   c   Linthorst , J. A. (2009). "An overview: Origins and development of green chemistry". Foundations of Chemistry.  12 : 55.  doi : 10.1007/s10698-009-9079-4 . Jump up^   Anastas , Paul T. ;  Warner, John C.  (1998). Green chemistry: theory and practice. Oxford [England]; New York: Oxford University Press.  ISBN   9780198502340 . Jump up^   Van Aken , K.; Strekowski , L.; Patiny , L. (2006).  " EcoScale , a semi-quantitative tool to select an organic preparation based on economical and ecological parameters" .  Beilstein Journal of Organic Chemistry.  2  (1): 3.  doi : 10.1186/1860-5397-2-3 .  PMC   1409775  .  PMID   16542013 . Jump up^   Green nanotechnology Jump up^   Prat , D.; Pardigon , O.; Flemming , H.-W.; Letestu , S.; Ducandas , V.; Isnard , P.; Guntrum , E.; Senac , T.; Ruisseau , S.; Cruciani , P.; Hosek , P., " Sanofi’s Solvent Selection Guide: A Step Toward More Sustainable Processes", Org. Proc. Res. Devel . 2013, 17, 1517-1525.  doi : 10.1021/op4002565 Jump up^  Sherman, J.; Chin, B.; Huibers , P. D. T.; Garcia- Valls , R.; Hatton, T. A., "Solvent Replacement for Green Processing", Environ. Health Persp . 1998, 106, 253-271.  doi : 10.2307/3433925 Jump up^   "The Nobel Prize in Chemistry 2005" . The Nobel Foundation. Retrieved 2006-08-04. Jump up^   Noyori , R.  (2005). "Pursuing practical elegance in chemical synthesis". Chemical Communications (14): 1807.  doi : 10.1039/B502713F . Jump up^   Baron, M. (2012). "Towards a Greener Pharmacy by More Eco Design". Waste and Biomass Valorization .  3  (4): 395.  doi : 10.1007/s12649-012-9146-2 . Jump up^  Jean-Pierre Schirmann , Paul Bourdauducq "Hydrazine" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim , 2002.  doi : 10.1002/14356007.a13_177 . Jump up^   Kurian , Joseph V. "A New Polymer Platform for the Future – Sorona from Corn Derived 1,3-Propanediol" Journal of Polymers and the Environment, Vol. 13, No. 2 (April 2005). Jump up^   "2011 Small Business Award" . United States Environmental Protection Agency. Jump up^  Coombs A. (2009).  Green at the Bench .  The Scientist . Jump up^  J-C Bradley  et al. ,  “Predicting Abraham model solvent coefficients” ,  Chemistry Central Journal  9:12 (2015) Jump up^   Henderson, R. K.; Jiménez-González , C. N.; Constable, D. J. C.; Alston, S. R.; Inglis , G. G. A.; Fisher, G.; Sherwood, J.; Binks , S. P.; Curzons , A. D. (2011). "Expanding GSK's solvent selection guide – embedding sustainability into solvent selection starting at medicinal chemistry". Green Chemistry.  13  (4): 854.  doi : 10.1039/c0gc00918k . Jump up^   Alfonsi , K.; Colberg , J.; Dunn, P. J.; Fevig , T.; Jennings, S.; Johnson, T. A.; Kleine , H. P.; Knight, C.; Nagy, M. A.; Perry, D. A.; Stefaniak , M. (2008). "Green chemistry tools to influence a medicinal chemistry and research chemistry based organisation". Green Chem.  10 :

59. Thank You !