Beraeu of Indian standard SUMMER INTERN_PRESENTATION.pptx

Beraeu of Indian standard ppt

1. Internship Presentation GUIDED BY: Mr. Neeraj Kumar Mahto (SCIENTIST B) Assistant Director

2. Table Of Contents Introduction BIS Activities Introduction to Indian Standards Voluntary & Mandatory Certification Visit to Jindal Supreme Visit to Max valve and Regulators Visit to Krishna Die Casting Visit to IOCL

3. INTRODUCTION

4. BIS ACTIVITIES

5. Introduction to Indian Standards Developed and published by the Bureau of Indian Standards (BIS ) Product Standard : IS 4270 : Steel pipes used for well irrigation IS 15658: Precast Concrete blocks for Paving Code of Practice: IS 456 : Code of practice for Plain and Reinforced concrete IS 800: Code of Practice for General construction in steel Test Methods: IS 1608 : Mechanical Testing of Metals - Tensile Testing IS 2131 : Method for Standard penetration test for soil Management System Standard: IS/ISO 9001: Quality Management Systems – Requirements  

6. Introduction to Indian Standards D evelopement of a standard process Proposal Committee Formation Drafting Public Review Finalization Approval and Publication

7. 7 Voluntary & Mandatory Certification

8. Visit to Northern Region Laboratory (Mohali) 1 Sample Reception Samples are logged into the system, undergo preliminary inspection, and are stored under appropriate conditions until testing. 2 Testing Methodologies Various analytical techniques are employed, including chromatography, spectroscopy, and microbiological testing. 3 Test Report Generation Results are compiled into comprehensive test reports, including data analysis, report compilation, review, and approval. 4 Uploading on LIMS The final step involves uploading the test reports to the Laboratory Information Management System (LIMS) for access and distribution.

9. Visit to Jindal Supreme (India) Private Limited Purpose of Visit Inspection of Steel Tubes Used for Water Wells Standard Followed IS 4270 Key Manufacturing Steps Raw Material Preparation Forming Welding Sizing and Straightening Cutting Finishing Inspection and Quality Control

10. VISIT TO MAX VALVES AND REGULATORS PRIVATE LIMITED As Per IS 9798. Manufacturer of regulators for LPG gas cylinders Lot inspection of Regulators Factory testing Total no of regulators was 14000 in lot. 125 were taken for testing. PM IS 9798

11. VISIT TO MAX VALVES AND REGULATORS PRIVATE LIMITED Any change in the BIS certification process required to enable easy adoption and Certification against the Indian Standards. Sample size should be reduced Frequency of inspection should be reduced.

12. VISIT TO KRISHNA DIE CASTING ISO 9001 : Quality management certification Performance of the firm prior to obtaining BIS license Overlapping between the different activities Wastage was higher Production cost was higher There were frequent accident. Customer satisfaction was less

13. VISIT TO KRISHNA DIE CASTING Enhancement in performance after obtaining BIS license and parameters in which enhancement is observed. increased efficiency clearly defined roles decreased overlapping reduced wastage lower production costs higher customer satisfaction  

14. VISIT TO KRISHNA DIE CASTING Suggestions for improvements in processes of BIS. reducing processing time . providing more detailed guidelines. implementing regular training for staff.

15. Visit to Indian Oil Corporation Limited (IOCL), Panipat Purified Terephthalic Acid (PTA) PTA is a key raw material used in the production of polyester fibres, resins, and films. Manufacturing Process The process involves oxidation of para-xylene (p-xylene), hydrogenation, purification and crystallization, drying, and packaging.

16. VISIT TO INDIAN OIL CORPORATION LIMITED (IOCL), PANIPAT

17. REASONS FOR PREFERRING ASTM

18. Difference in certification process Transparency Exemptions in some parameters as per Industry size Clarity to officers Audit at one time for several certifications Inspection done by experts in that specific area

19. Thank You