Biomass Pallets.pptx

FUEL

1. What is mean by Fuel A fuel is any material that can be made to react with other substances so that it releases energy as thermal energy or to be used for   work . The concept was originally applied solely to those materials capable of releasing chemical energy but has since also been applied to other sources of heat energy such as nuclear energy

2. Types of Fuel Non Renewable energy Fuels :- Coal, Furnace Oil ,LPG,CNG. ( This fuel will end one day) Renewable Energy Fuels :- Biomass, Briquettes,Pallets ( This fuel is generated by agro waste)

3. Introduction Boilers/furnaces are being used for more than 400 years now to produce water, steam, or heat in multiple industries The primary heat source i.e. fuel used for running the furnaces/boilers in industries is heavy oil, light oil, gas - Coal is used but mainly by thermal power plants In India, the boilers are regulated by Indian Boilers Regulations, 1950 Under this regulations, all the boilers are required to be inspected and certified by the person authorized under these regulations

4. Introduction Industries where boilers/furnaces are used include: Steel Refinery Petrochemical Cement Sugar Distillery Pharmaceutical Fertilizer Paper Chemical Non ferrous metal Textile Paper Food steel

5. Calorific value of some fuel Fuel calorific value moisture% Coal 3500-5200 10-30 Wood 2500-3500 30-50 Furnace oil 7500-8000 5- 15 LPG 10500 --- Diesel 9000-9500 --- Pallets 3800-4700 5-8

6. Types of Boiler Types of boiler use in Industry are AFBC Boiler CFBC Boilers Biomass fired boilers Wood fired boilers Furnace oil fired boiler Gas fired boilers Pallets fired boilers Above all boilers can run on pallets directly or with burner.

7. Types of Fuel Available in Maharashtra In Maharashtra following fuels are available Agro waste Coal Wood Diesel Furnace oil LPG/LNG Biomass Briquettes Biomass pallets

8. Introduction With the growing competition in industry, cost efficiency is of utmost importance Increased awareness about sustainable and environment friendly solutions and energy efficiency solutions Biomass fired boilers and furnaces have started gaining momentum For companies with existing oil or gas fired boilers/furnaces, it may not be feasible to invest on new boilers/furnaces unless and until there is an expansion plan Considering this challenge for existing companies, Energy Dynamics has come up with an alternative for existing companies with the following objectives: Cost reduction thereby leading to higher profits Minimal investment in making changes to the existing boilers/furnaces for implementation Sustainability i.e. use of clean and green source of energy thereby reducing the carbon footprint of the company

9. Value Proposition We understand that your company has boilers/furnaces which are fired by oil or gas Energy Dynamics proposes to take the contract for running the boiler/furnace for your company whereby the following would be the way forward: The company would need to invest a small amount of about INR 2-3 lacs in purchasing an assembly which would make the boiler/furnace compatible to run using biomass pellets – Energy Dynamics would assist the company in this Energy Dynamics would use biomass pellets for firing the boiler/furnace Energy Dynamics would ensure that there are cost savings to the company in this process Energy Dynamics would make sure the following: Seamless running of the business operations Energy efficiency Cost efficiency

10. Mahagenco Thermal Power plant Name of Plant MW Chandrapur Super Thermal Power Station - 2920 MW. Koradi Thermal Power Station - 3660 MW. Khaparkheda Thermal Power Station - 1340 MW. Bhusawal Thermal Power Station - 1420 MW. Nashik Thermal Power Station - 630 MW. Parli Thermal Power Station - 1130 MW. Total Power Generation By MAHAGENCO= 11100 MW

11. NTPC Power plant in Maharashtra Mouda ( Nagpur) 2,320 MW Solapur ( Solapur ) 1320 MW Total Power Generation by NTPC= 3640 MW

12. Private Power Plant In Maharashtra Sinner Power Plant 1350 MW GMR Power Warora 600 MW Adani power Titrora 3300MW Vidharaba Energy 600 MW Ideal Energy 270 MW Gupta Energy 120 MW Rattan Energy 1350 MW JSW Power 1200 MW Adani Mumbai 600 MW Wardha Power 540 MW Dhariwal Power 600 MW Tata Power 980 MW Total Power Generation in Private sector =11500 MW

13. Total Power generation in Maharastra By MAHAGENCO = 11100 MW By NTPC = 3640 MW By Pvt. Party = 11500 MW Total = 26400 MW

14. Coal Required/Day for big size power plant Total Power generated/Day =26400 MW Coal required/MW =0.87 ton Coal Required/Hr =0.87*26400*0.75=17000TPH Coal Required/Day =17000*20= 3,40,000 TPD If we consider 5% Renewable fuel(Pallets) then total requirement of Biomass Pallets is =340000*5%= 17000 TPD

15. Drawback of coal Higher sulphur % which decrease life of boiler Emmission of co2 is more Moisture % is more ( Approximate 25%) Ash % is more than 20% Not available in all area so transport cost is higher Ash disposal is serious issue.

16. Adventages of Pallets Sulphur % is low so corrosion is less CO2 emission is very low Will generates employments by making pallets Will make pallets near by Power generation unit so transport cost is very low Moisture % is very low ( below 5%) Ash % is very low ( Below 5%) Ash is used as soil impurity again Also farmers can get extra income by selling Agro waste/Bamboo

17. Use of Pallets in steel Industry In Jalna there are 2 types of steel industry in which 1 scrap is melted and pour this liquid in mould for this they are using Induction Heating system( 60%) 2 cold billates are reheated to make different types of steel in which they are using coal as fuel. In 2 process we can replace coal by Biomass pallets. In jalna steel industry approximate 400 ton coal is required to reheat the steel that can be completed replaced by pallets in that case 400 Ton bamboo may be used as raw material for making pallets. if we 50 ton raw material/acre then we required8 acres bamboo per day means 3000 Acres bamboo only for Jalna Steel industry only

18. Use of Pallets in Cremation ground In Cremation ground we are using wood as fuel for burning the body. For one body approximate we are using 300 to 400 kg of wood and diesel . If we use biomass pallets then we can burn one body in 60 to 80 kg biomass pallets and it will take only 20 to 25 min to burnt full body. ( In maharashtra approximate more than 1000 ton wood is required per day to burnt body if we use pallets we can save 1000 ton tree per day)

19. How to use biomass pallets in industry In industry we can use pallets directly to AFBC as well biomass fired boiler but for Furnace oil as well as for Gas fired boilers we have to use pallet Burner who convert solid form to Gaseous form. Also for making producer gas we can use pallets with burner for making producer gas.

20. Substitute fuel for furnace oil in industry In some industry nearby Mumbai they have low space for boiler as well as storage of fuel so they are using furnace oil fired boilers as it requires low area but if we use pallets we can run that furnace oil boilers with pallet fire but we have to use pallets burners which converts solid in to gaseous form and requires only 20 feet* 20 feet extra area for conversion and fuel storage. Also we can save approximate 50% fuel cost. ( in nearby Mumbai app. 2000 boiler are available)

21. About Energy Dynamics Energy Dynamics is into the business of manufacturing biomass fuel pellets which is an alternative to non-renewable sources of energy like oil, gas, coal etc. The people behind Energy Dynamics have an extensive experience of dealing in industrial boilers, furnaces and the fuels required in these boilers/furnaces i.e. oil, gas, coal etc Considering the non-renewable nature of oil, gas, coal and other resources, Energy Dynamics had been experimenting with the ideas of manufacturing biomass briquettes and pellets for multiple years now Energy Dynamics is a firm believer of sustainability and is sure that alternative sources of energy is the future

22. Way forward Energy Dynamics to inspect the boilers/furnaces currently used by the company Energy Dynamics to understand the technicalities and specifications along with the requirements from the boiler/furnace in detail Energy Dynamics to come up with the final cost benefit analysis and savings to the company along with the final proposition from its side The company to outsource the operation of its boiler/furnace to Energy Dynamics upon satisfaction: Energy Dynamics shall be happy to run the boiler/furnace on a trial/pilot basis to prove the concept and savings to the company

23. Management team Mr Kailas Nage Qualification – BE (Production) in 1998 Started his career as Assistant Engineer in 1998 with Sugar Mill & thereafter worked with following Companies specializing in the field of operation, maintenance, designing, identifying alternate fuels, erection & commissioning of boilers, turbines and power plants Kannad SSK Ltd Meghmani Industries Ltd, Ahmadabad Anama Energies Pvt Ltd, Pune Shree Renuka Sugars, Kolhapur Skyzen Infrabild Pvt Ltd, Mumbai Merck Pharma , Goa Kailas has worked entirely in the energy sector and since past three years, has been doing research and analysis on alternative manufacturing processes and uses of biomass fuels Contact Kailas Baburao Nage Mob. No 9730020410/9767958544 Email :- [email protected]