Conventional Power generation

760 views 111 slides Mar 25, 2021
Slide 1
Slide 1 of 111
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27
Slide 28
28
Slide 29
29
Slide 30
30
Slide 31
31
Slide 32
32
Slide 33
33
Slide 34
34
Slide 35
35
Slide 36
36
Slide 37
37
Slide 38
38
Slide 39
39
Slide 40
40
Slide 41
41
Slide 42
42
Slide 43
43
Slide 44
44
Slide 45
45
Slide 46
46
Slide 47
47
Slide 48
48
Slide 49
49
Slide 50
50
Slide 51
51
Slide 52
52
Slide 53
53
Slide 54
54
Slide 55
55
Slide 56
56
Slide 57
57
Slide 58
58
Slide 59
59
Slide 60
60
Slide 61
61
Slide 62
62
Slide 63
63
Slide 64
64
Slide 65
65
Slide 66
66
Slide 67
67
Slide 68
68
Slide 69
69
Slide 70
70
Slide 71
71
Slide 72
72
Slide 73
73
Slide 74
74
Slide 75
75
Slide 76
76
Slide 77
77
Slide 78
78
Slide 79
79
Slide 80
80
Slide 81
81
Slide 82
82
Slide 83
83
Slide 84
84
Slide 85
85
Slide 86
86
Slide 87
87
Slide 88
88
Slide 89
89
Slide 90
90
Slide 91
91
Slide 92
92
Slide 93
93
Slide 94
94
Slide 95
95
Slide 96
96
Slide 97
97
Slide 98
98
Slide 99
99
Slide 100
100
Slide 101
101
Slide 102
102
Slide 103
103
Slide 104
104
Slide 105
105
Slide 106
106
Slide 107
107
Slide 108
108
Slide 109
109
Slide 110
110
Slide 111
111

About This Presentation

Conventional power generation, thermal, nuclear, gas turbine, hydro electric power plants, schematic, working, advantages and disadvantages, site selection


Slide Content

Conventional Power Generation: Steam power
station, Nuclear power plant – Gas turbine power
plant- Hydro power station: Schematic
arrangement, advantages and disadvantages,
Thermo electric and thermionic generators,
Environmental aspects for selecting the sites and
locations of power plants.
1

Conventional energy sources includes oil, gas and
coal.
These conventional sources are usually fossil fuels.
Their use leads to increased greenhouse gas
emissions and other environmental damage. These
sources of energy are also called non renewable
sources.
These sources of energy are in limited quantity
except hydro-electric power. Conventional energy
directly mean the energy source which is fixed in
nature like oil, gas and coal.

2

3

Large amount of power can be generated by
using coal and nuclear etc.
Transportation of oil and coal to the plant is
easy.
Gas fired power plant are having great
efficiency.
Fossil fueled power plant can be built almost
anywhere.

4

Fossil fuels are depleted once they used.
They produce toxic and hazardous gases and
residues which are causing environmental
pollution.
Power generation efficiency is less.
As sources are remotely placed, there cost of
transmission is large.
Maintenance cost is high.

5

6

18

•Schematic arrangement,
•Advantages and disadvantages,
•Environmental aspects for selecting the
sites and locations of power plants.
51

52

54

55

56

57

58

59

60

62

63

64

70

72

As of November 2020, India has 22 nuclear reactors in
operation in 7 nuclear power plants, with a total installed
capacity of 6,780 MW

75

Gas Turbine Power Plant
81

•Gas turbine electric power plant is a power plant in which a gas
turbine is used as the prime mover for the generation of
electrical energy.
•The principle of a gas turbine power plant is that a turbo-
compressor compresses working medium to a high pressure
and then it is burnt in the combustion chamber where the
combustion takes place at a constant pressure and
temperature of the working medium is raised. This high
pressure and high temperature working medium is then
expanded in a gas turbine coupled to the generator.
Gas Turbine Power Plant
82

83

84

85

86

87

88

89

90

•Distance from Load Centre:
The site should be as near to the load centre as possible so that the trans­mission costs and
losses are minimized.
•2. Availability of Land:
The land should be available at cheap rate in order to keep the capital cost of the plant low.
•3. Availability of Fuel:
The fuel should be easily avail­able and at reasonable rate.
•4. Availability of Transportation Facilities:
The transportation facilities should be available.
•Distance from Populated Area:
The site should be away from thickly populated area because of noisy operation.
•6. Type of Land:
The land should be of high bearing capacity to withstand the load of the plant and also the
vibrations transmitted to the foundations from compressors and turbines.

Site selection criteria for Gas turbine power plants
91

Hydro-electric Power Plant
92

100

•Conventional Plants:
Conventional plants use potential energy from dammed water.

•Pumped Storage Plant:
In pumped storage plant, a second reservoir is constructed near the
water outflow from the turbine. When the demand of electricity is low, the
water from lower reservoir is pumped into the upper (main) reservoir.

•Run-Of-River Plant:
•In this type of facility, no dam is constructed and, hence, reservoir is
absent. A portion of river is diverted through a penstock or canal to the
turbine.
Types of hydropower plant
102

104

106

•Availability of large amount of water
•Hilly area required for great flow
•Large Civil work
•Large catchment area
•Transportation facility
•Near to load center
•Earthquake free land

What are site selection criteria for selecting location of
hydro power plant?

107

Environmental Impacts

•Damage to wildlife habitats and migratory
paths
•Land use
•Greenhouse gas emissions from reservoirs

Environmental Impacts

111
Thank You
Dr. Sushma Pardeshi Singh,
Assistant Professor,
Department of Basic Science&
Humanities,
J.D. College of Engineering &
Management, Nagpur
Email- [email protected]
Tags