Fire Extinguishers use and theory training

infoquenchcare 12 views 14 slides Aug 28, 2024
Slide 1
Slide 1 of 14
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14

About This Presentation

Fires are classified according to the type of fuel that is burning.
If you use the wrong type of fire extinguisher on the wrong class of fire, you might make matters worse.
Its very important to understand the four different fire (fuel) classifications…


Slide Content

www.spin-safety.orgCreated by Gary Smalling
FIRE EXTINGUISHERS
The ABC’s

Created by Gary Smalling
Disclaimer
The information presented in this presentation has been compiled from
sources believed to be reliable and is intended to be a tool to assist and
guide you in building your own presentation. This program may not
address all the hazardous conditions or unsafe acts that may exist. For
that reason, SPIN cautions users to confirm accuracy and compliance
with the latest standards and best practices. Local, State/Provincial
and Federal regulations take precedence over this material.
Implementation of any practices suggested by this program is at your
sole discretion, and SPIN will have no liability to any party for any
damages including, but not limited to, direct, indirect, special or
consequential damages, arising out of or in connection with the
information provided or its use.

The Fire Triangle
In order to understand how fire extinguishers work,
you first need to know a little bit about fire.

Essentially, fire extinguishers put out fire by taking away
one or more elements of the fire triangle.

TYPES OF FIRES
CLASS A - Wood,
paper, cloth, trash,
plastics
CLASS B - Oil, gas
grease, flammable
liquids
CLASS C - Electrical,
Energized electrical
equipment
Most fire extinguishers
will have a label telling
you what kind of fire
the extinguisher is for.

Created by Gary Smalling
Fire extinguishers
inspections
Shell must be in good condition
–no dents or rust
Must be fully charged
–check pressure gauge
Pin must be in place
Proper type of fire extinguisher
for potential hazard

All Purpose Water
FOR CLASS A

FOR CLASS A, B or C FIRES

FOR CLASS A, B or C FIRES

FOR CLASS B or C Fires

FOR CLASS B or C Fires

REMEMBER P.A.S.S.
Pull the pin.
This will allow you to discharge the extinguisher
Aim at the base of the fire.
If you aim at the flames (which is
frequently the temptation),
the extinguishing agent will fly
right through and do no good.
You want to hit the fuel.

Squeeze the top handle or lever.
This depresses a button that releases the
pressurized extinguishing agent in the
extinguisher.
Sweep from side to side
until the fire is completely out. Start
using the extinguisher from a safe
distance away, then move forward.
Once the fire is out, keep an eye on
the area in case it re-ignites.

As a Safety Professional, SPIN encourages you to submit safety
resources that are particularly beneficial to fellow Safety Professionals.
We welcome your suggestions and thank you for your input. Please use
the following instructions when submitting resources.
1.Please include your full name (first & last) in the subject section of the your email
2.Please include a brief description, name of program and version of any and all files submitted
3.Please use a compression program, like WinZip, when submitting multiple or large files
4 Please include appropriate contact information (name, phone number, etc.) when referring
potential new members
5.Include links to safety related URL's in the description section
6.Please send photos and graphic files as 72 dpi jpg, tif or gif files
submit all items to: [email protected]
For more information about SPIN visit the web-site at www.spin-safety.org or call 1-800-673-0439