GENERAL CLEANING OF AIRCONDITIONING UNITS.pptx

AC Cleaning

1. GENERAL CLEANING OF AIRCONDITIONING UNITS (STEP BY STEP) Prepared By:

2. Why we conduct AC general cleaning? Reasons: 1. It improves Efficiency 2. It reduces energy cost 3. It leads to improve air quality 4. It protects important HVAC parts 5. It extend your aircon’s operational life

3. Sample photos:

4. Tools and Equipment to Bring when Doing AC Cleaning: Service Report Pressure Washer Wash Bag Blower Ladder Screw Driver Pliers Water Container Vacuum Pressure Gauge

5. Step 1 Check the Schedule posted in the messenger GC. -name of the client -location -client expected time Check the tools and equipment if it complete before proceeding to the client

6. Step 2 Upon arrival to site, make a courtesy call to the client. -greet them -politely ask them the area of the AC that needed cleaning Unload tools and equipment and proceed to the area.

7. Step 3 Upon arrival to Indoor location, perform the following Test the AC unit first to check if it is running in condition Remove the Power Supply Remove the Ac Cover and Filter Set up the Wash Bag and Pressure Washer Start Spraying water to the Indoor. *Take note of the Area that Needed Cleaning . Clean the Cover and Filter *Choose a better place to clean it ( RestRoom /Outside the room in an open area)

8. Step 3 After Spraying Water, Ready the Blower to Easily Dry the Indoor Unit Return the Cover and Filter Conduct Drain Flow Test After Conducting Drain Flow Test at Indoor Unit, Proceed Cleaning the Outdoor Unit.

9. Step 4 After Cleaning Both the Indoor & Outdoor, Conduct testing of the unit before leaving. Provide Service Report (Complete Fill Up for AC Cleaning)