Generations of Computers Presentation. . .

A short presentation of 15 encompassing four generations from the 1st to the present.

Created using Canva Template.

1. Generations
of Computers
An Overview of
Evolutions in
Computing
11:11PM

2. Introduction
Gen 3
Gen 2
Gen 4
Gen 1
The development of
computers has been
divided into distinct
periods, or generations,
each distinguished by
notable technological
breakthroughs that
have changed the
computing industry.
Gen 4

3. Objective of
the
Presentation:
Back to Agenda Page
This presentation will explore the five
generations of computer development,
highlighting key innovations and their
impact on modern computing
In order to understand how these
advancements have shaped today's
digital world and continue to influence
future technologies.
As well as to acknowledge the pioneers
whose contributions have driven the
evolution of technology.

4. ✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
The First
Generation
1940-1956

5. Your paragraph text
First Generation: The
Dawn of Computing
Your paragraph text
The first generation of computers, spanning from 1940 to
1956, was characterized by the use of vacuum tubes for
circuitry and magnetic drums for memory. These machines
were massive, often occupying entire rooms, and
consumed large amounts of power, generating significant
heat, which frequently caused malfunctions. The internal
storage capacity was limited, with a maximum of around
20,000 characters.
These early computers relied on machine language, the
most basic programming language, and were capable of
solving only one problem at a time. Setting up a new
problem often took days or even weeks. Input was done
using punched cards and paper tape, while output was
displayed on printouts.
First-generation computers operated
using vacuum tubes as their primary
components, which functioned as
switches and amplifiers to control the
flow of electricity and represent binary
data (0s and 1s).
Input was provided through punched
cards and paper tape, with each card
representing a set of instructions or
data points fed into the machine one at
a time.
Processing was done in a sequential
manner using machine language,
requiring extensive manual coding and
a deep understanding of hardware.
Data was temporarily stored on
magnetic drums, which had limited
capacity, while output was generated
as printouts, often making the entire
process slow and tedious.

6. The Creations of the 1st Generation
The UNIVAC (Universal Automatic
Computer), designed in 1951, was the first
commercially available computer.
Created by Eckert and Mauchly after
their work on ENIAC, the UNIVAC was
notable for being the first computer
delivered to a business client, the U.S.
Census Bureau.
Vacuum tubes acted as electronic
switches and amplifiers, allowing
computers to process data by controlling
the flow of electricity. The reliance on
vacuum tubes in first-generation
computers highlighted both their
innovative potential and the limitations of
technology at the time,.
ENIAC
The ENIAC (Electronic Numerical Integrator
and Computer), completed in 1945, was
one of the first electronic general-
purpose computers. Developed by John
Presper Eckert and John Mauchly at the
University of Pennsylvania, ENIAC used
over 17,000 vacuum tubes and could
perform complex calculations much faster
than any previous mechanical computer.
UNIVAC
VACUUM TUBES

7. The first generation of computers, while groundbreaking, had significant
drawbacks that limited their efficiency and practicality. They consumed
immense amounts of energy, generated excessive heat due to the use of
vacuum tubes, and required constant maintenance.
These machines were enormous and difficult to transport, making them
suitable only for large-scale operations. Additionally, programming was a
complex and time-consuming process, often requiring rewiring and the use
of punch cards.
These limitations highlighted the need for improvement in both hardware
and functionality, leading to the development of the second generation of
computers.
With the invention of transistors, computers became smaller, faster, more
reliable, and energy-efficient, marking a significant leap in the evolution of
computing technology.
Back to Agenda Page

8. ✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
The Second
Generation
1953 - 1963

9. Your paragraph text
Second Generation: Efficiency
and Innovation
Your paragraph text
The second generation of computers, developed between
1956 and 1963, represented a major advancement in
technology with the introduction of transistors to replace
vacuum tubes.
Transistors, much smaller, faster, and more reliable,
significantly improved the efficiency of computers by
reducing their size and energy consumption while
eliminating the overheating issues that plagued first-
generation machines.
This era also brought innovations in memory storage, as
magnetic cores replaced the earlier magnetic drums,
allowing computers to store and retrieve data more
quickly and efficiently.
Transistors, the core technology of
second-generation computers, work by
acting as a switch or an amplifier for
electrical signals. Made from
semiconductor materials like silicon, a
transistor has three parts: the emitter,
base, and collector. When a small electrical
current is applied to the base, it controls
the larger current between the emitter
and collector, either allowing the current
to flow or stopping it, effectively
switching it on or off. This ability to switch
states rapidly enabled transistors to
process binary data, representing 0s and
1s, much faster than vacuum tubes.
Additionally, transistors are smaller,
generate less heat, and are far more
reliable, which allowed computers to
operate more efficiently and perform
more complex operations in a shorter
amount of time.

10. The Creations of the 2nd Generation
The UNIVAC (Universal Automatic
Computer), designed in 1951, was the first
commercially available computer.
Created by Eckert and Mauchly after
their work on ENIAC, the UNIVAC was
notable for being the first computer
delivered to a business client, the U.S.
Census Bureau.
Vacuum tubes acted as electronic
switches and amplifiers, allowing
computers to process data by controlling
the flow of electricity. The reliance on
vacuum tubes in first-generation
computers highlighted both their
innovative potential and the limitations of
technology at the time,.
ENIAC
The ENIAC (Electronic Numerical Integrator
and Computer), completed in 1945, was
one of the first electronic general-
purpose computers. Developed by John
Presper Eckert and John Mauchly at the
University of Pennsylvania, ENIAC used
over 17,000 vacuum tubes and could
perform complex calculations much faster
than any previous mechanical computer.
UNIVAC
VACUUM TUBES

11. The second generation of computers brought significant
advancements with the introduction of transistors, making machines
smaller, faster, more reliable, and energy-efficient compared to their
vacuum tube predecessors.
However, while transistors improved performance and reduced size,
they still produced heat and had limitations in processing power.
Additionally, the use of magnetic core memory, though efficient for
the time, was still relatively expensive and had storage limits.
These shortcomings, along with the growing demand for more
complex computing tasks, led to the development of the third
generation of computers.
The creation of integrated circuits revolutionized computing by
packing multiple transistors onto a single silicon chip, drastically
increasing processing speed, efficiency, and further reducing the size
and cost of computers.
Back to Agenda Page

12. ✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
The Third
Generation
(1964-1971)

13. Third Generation: The
Integrated Circuit Revolution
The third generation of computers (1964-1971) introduced
integrated circuits (ICs), which placed multiple transistors
onto a single chip, drastically improving speed, efficiency, and
reducing size.
This allowed computers to handle more complex tasks and
run multiple programs simultaneously. Keyboards and
monitors replaced punch cards for input and output, making
computers more user-friendly.
Operating systems also became more advanced, allowing
better memory management and multiprogramming. High-
level programming languages like FORTRAN, COBOL, and BASIC
gained prominence, expanding the scope of computer
applications.
These advancements made computers smaller, more
affordable, and accessible to businesses and educational
institutions.
Integrated circuits (ICs), the key technology of
third-generation computers, work by
integrating multiple electronic components—
such as transistors, resistors, and capacitors—
onto a single piece of semiconductor material,
typically silicon. Each component performs a
specific function, such as switching or
amplifying electrical signals, which allows the
IC to control and process data more efficiently.
In an IC, transistors act as tiny switches that
rapidly turn on or off to represent binary data
(0s and 1s). By miniaturizing these components
and connecting them together on a single chip,
integrated circuits greatly increased the speed
and efficiency of computers, while reducing
their size and cost. This innovation made it
possible for computers to handle more complex
tasks and perform multiple functions
simultaneously, all within a much smaller and
more compact unit.

14. The Creations of the 2nd Generation
A close-up of an early integrated circuit,
invented by Jack Kilby at Texas Instruments in
1958 and Robert Noyce at Fairchild
Semiconductor in 1959. The IC chip packed
multiple transistors, resistors, and capacitors
onto a small silicon chip, drastically improving
processing speed and efficiency while
reducing the size of computing hardware. This
breakthrough formed the foundation of third-
generation computers.
This image shows the transition from
punch cards to interactive user
interfaces. Third-generation computers
introduced keyboards and monitors for
direct input and output starting in the
mid-1960s These interfaces marked a
shift in user interaction, allowing for
more dynamic computing experiences.
IBM System
The IBM System/360, introduced by IBM in 1964
was one of the most iconic third-generation
computers, featuring integrated circuits that
revolutionized computing by making systems
faster, more reliable, and smaller. It supported a
wide range of applications, from business data
processing to scientific research, and could run
multiple programs simultaneously due to its
advanced operating system.
Integrated Circuit (IC) Chip
Keyboard and Monitor

15. The third generation of computers, powered by integrated
circuits, revolutionized computing by enhancing speed,
efficiency, and affordability.
However, as the demand for even greater performance grew,
integrated circuits still had limitations in handling increasingly
complex tasks and large-scale data processing.
The need for more powerful and compact systems led to the
development of microprocessors, which combined all the
essential components of a computer’s central processing unit
(CPU) onto a single chip.
This breakthrough paved the way for the fourth generation
of computers, marking the beginning of the personal computer
revolution and the rise of portable technology.
Back to Agenda Page

16. ✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺✺
The Fourth
Generation
1971-Present

17. Your paragraph text
Fourth Generation of
Computers: The
Microprocessor Revolution
Your paragraph text
The fourth generation of computers, beginning in 1971,
was defined by the invention of the microprocessor, a
single silicon chip that integrated the entire central
processing unit (CPU) of a computer.
This breakthrough, led by engineers like Ted Hoff at Intel
with the development of the Intel 4004 chip, drastically
reduced the size and cost of computers while increasing
their processing power.
The microprocessor allowed computers that once filled
entire rooms to be shrunk down to desktop and later
portable devices, sparking the personal computer
revolution.
modern technology today.
First-generation computers operated
using vacuum tubes as their primary
components, which functioned as
switches and amplifiers to control the
flow of electricity and represent binary
data (0s and 1s).
Input was provided through punched
cards and paper tape, with each card
representing a set of instructions or
data points fed into the machine one at
a time.
Processing was done in a sequential
manner using machine language,
requiring extensive manual coding and
a deep understanding of hardware.
Data was temporarily stored on
magnetic drums, which had limited
capacity, while output was generated
as printouts, often making the entire
process slow and tedious.

18. Your paragraph text
Your paragraph text
With the introduction of microcomputers, including the IBM PC in
1981 and Apple’s Macintosh in 1984, computing technology
became more accessible to individual users and small
businesses.
This generation also saw the rise of graphical user interfaces
(GUIs), which made computers more user-friendly with icons
and windows replacing text-based commands. Operating
systems like MS-DOS and Mac OS played crucial roles in
enabling users to interact with their machines more easily.
In addition to revolutionizing personal computing, fourth-
generation technology led to the development of networking
and the Internet, allowing computers to connect and share
data across great distances.
This generation marked a significant leap forward in
communication and interconnectivity, paving the way for the
digital age.
The fourth generation not only made computers a household
item but also laid the foundation for the complex systems and
networks that define modern technology today

19. Thank you!
for your attention.
Conclusion: The Evolution of Computing
The development of computers, from the vacuum tube systems of the first
generation to today’s AI-driven devices, has transformed technology and
society in remarkable ways. Each generation brought breakthroughs in speed,
size, efficiency, and accessibility, shaping the digital world we live in now.
As we look to the future, the potential for quantum computing, artificial
intelligence, and nanotechnology continues to push the boundaries of what’s
possible. The evolution of computing will undoubtedly continue to shape the
way we live, work, and connect.