GRP Cladding System for Insulated Pipelines.pdf

GRP Cladding System for Pipelines.

1. Lloyd Clad -Non Metallic GRP Cladding
Improvements in Constructability and Integrity of
Corrosion and Insulation Protection Systems
LLOYD INSULATIONS (I) LIMITED

2. LLOYD INSULATIONS (I) LIMITED
Non Metallic Cladding System Lloyd Clad –GRP Cladding
LloydCladGRP Roll
StandardSize:1mx20mt
Solution : Lloyd Clad Semi-cured GRP Cladding System

3. Application Of Lloyd Clad Non metallic GRP Cladding System
LLOYD INSULATIONS (I) LIMITED
Cut the flexible GRP sheet with knife
Remove the inner protective Mylar film
Wrapping the GRP sheet over the insulation and
press firmly by hand.
Non Metallic Cladding System Lloyd Clad –GRP Cladding

4. Application Of Lloyd Clad Non metallic GRP Cladding System
LLOYD INSULATIONS (I) LIMITED
Remove the outer Mylar guard film for 50 mm
to provide overlap
Press firmly over the joint.
After 2 hours of application GRP cladding will be
rock hard and overlaps will fuse to form a
seamless surface
Non Metallic Cladding System Lloyd Clad –GRP Cladding

5. Lloyd Clad-GRP Insulation Cladding
LLOYD INSULATIONS (I) LIMITED
Chilled Water Pipe Line
Non Metallic Cladding System Lloyd Clad –GRP Cladding

6. GRP Cladding -After curing
LLOYD INSULATIONS (I) LIMITED
GRP : Foot Traffic Resistant Cladding
Non Metallic Cladding System Lloyd Clad –GRP Cladding

7. Great chemical resistance
Can be installed in ambient temperatures from -15
O
C to +55
O
C
Easily cut and fabricated into shapes at site
Good adhesion to all type of Insulation
No additional attachment systems required
Overlap forms a chemical bond
Reduce life cycle costs compared to metal
LLOYD INSULATIONS (I) LIMITED
Benefits of Lloyd Clad GRP Cladding Over the Traditional Aluminum/GI Cladding
Non Metallic Cladding System Lloyd Clad –GRP Cladding

8. TECHNICAL DATA OF 1.7 -2 mm THK. GRP SHEET
Sl.No
Properties
1 Temperature of use (
o
C)
Polyester grade resin 90
Epoxy Grade Resin 170
2 Density(gms. /cc) 1.85
3 Bending Strength (Mpa-minimum) 120
4 Tensile Strength (Mpaminimum) 100
5 Elongation at break (%) 5.776
6 Impact Resistance - Depth of indentation shall not be more than 0.2mm.
7 Water VapourPermeability (g/m2.h.mm Hg) max. 0.5
8 Temper ( Bercol) minimum 40
LLOYD INSULATIONS (I) LIMITED
Non Metallic Cladding System Lloyd Clad –GRP Cladding