health and safety HSSE INDUCTION TRAINING.pptx

induction

1. HSSE I NDUCTION T RAINING Presented by - I MRANUL H AQUE DURATION – 25 MINS

2. Introduction A few facts OH&S legislation Rights & Responsibilities Safety Signages Assembly points & Entry/Exit Hazards/Risk in your place SWP/SOP Reporting any incident/near miss Emergency procedure First Aid Fire safety & Awareness PPE Safety Success

3. Few Key Facts The first week on each new site is the most dangerous. Accidents are more frequent at the end of the day. Small jobs are more risky. Safety hats, Hi-Viz jackets, Safety boots DO prevent injury and death. Light weight shoes- such as trainers, runners shoes and slippers are not suitable on site.

4. Food for thought… P.A.U.S.E. for thought.. P lan before you start A ssess possible hazard U nexpected S hare your plan E xecute

5. OH&S Law and Legislation continued…

6. OH&S Law and Legislation

7. Rights and responsibilities Employer S AFE PLACE OF WORK S AFE PLANT AND EQUIPMENT S AFE SYSTEM OF WORK IITS Employee OR Workers T AKE CARE OF HIMSELF AND OTHERS. U SE SAFETY EQUIPMENT PROVIDED AND NOT TAMPER WITH IT . R EPORT ANY UNSAFE SITUATION, NEAR-MISS OR INCIDENT. F OLLOW RULES AND PROCEDURES.

8. Safety Signage -- CIRCULAR = COMMAND -- TRIANGLE = WARNING -- RECTANGLE = INFO. RED BORDER = DON’T DO YELLOW = WARNING BLUE = MUST DO GREEN = SAFE

9. Assembly points, Entry & Exit A SSEMBLY P OINTS - a place where people should go if there is an emergency . E NTRANCE - an opening, such as a door, passage, or gate, that allows access to a place . E XIT - a n   exit  route is a continuous and unobstructed path from any point within a workplace to a place of safety .

10. No smoking, No drugs, No Alcohol Premier plastic company premises is a NO SMOKING zone. Misuse of substances and consumption of drugs or alcohol during work is strictly prohibited . Strict disciplinary action will be taken against those found guilty.

11. Hazards/Risks at your place Hot environment Violence at work Movement Access equipment Manual handling Mechanical hazard Non-mechanical hazard Fire hazard

12. SWP/SOP SAFE OPERATING PROCEDURE It outlines the hazards , risks and associated controls measures to be applied to ensure the task/activity is conducted in a way to reduce the risk of injury .

13. Report of Injury, Near-miss or incident Report any injury, near-miss, illness, accident/incident as it gives a data that employer can use to identify and control risks before accidents happen .

14. Emergency procedure IN CASE OF ANY ACCIDENT OR INCIDENT CONTACT YOUR SHIFT SUPERVISOR, IF HE HIS ABSENT THEN CONTACT THE PLANT MANAGER OR HSSE OFFICER . IN THE EVENT OF FIRE – Small fire Warn others Call for help Production manager (Mr. Khaiyam Akhtar ) [phone] HSSE Executive (Mr. Imranul Haque) [phone] Plant engineer (Mr. Saeed Ahmed) [phone] Plant engineer (Mr . Shuaib) [phone] Shift supervisor (Mr. Sohail Ahmed) [phone] / 3327 1045 Shift supervisor (Mr. Inaam Ur Rehman ) + 974 5515 5587 Attempt to extinguish fire ( if trained to use fire extinguisher)

15. First Aid H elp given to a sick or injured person until full medical treatment is available. We have 5 first aid boxes throughout the plant. HDPE HALL PET HALL PREFORM HALL MOLD MAINTENANCE AREA WARE HOUSE ENTRANCE

16. PPE Required PPEs – Safety boots Hair net Safety gloves Safety hat Hi-Viz jacket Respiratory mask (if necessary ) Safety harness (if working at height) Ear muffs (if necessary) Safety goggles ( during hot work)

17. Safety for Success All accidents are preventable. No job is worth getting hurt for. Safety is everyone’s responsibility. Continuous improvement. Individual will be trained and equipped to have the skills to ensure an accident free workplace.