Holmatro Rescue Tools

1. HOLMATRO RESCUE TOOLS BY: F.F. NICOLALDE NASA/JPL FIRE DEPARTMENT

2. FIREFIGHTER SAFETY PPE’S Helmet, Gloves, Eye Protection F.F. Turnouts SCBA if necessary

3. SCENE SAFETY Ensure the scene is safe prior to exiting the apparatus (watch for traffic). Secure the scene prior to beginning extrication/ rescue operations. Place your vehicle on scene to protect the rescuers and victims from traffic. Ensure there aren’t any other safety issues that need to be secured first . i.e. -Down Power Lines Notify any additional resources. i.e. : ALS, Security / PD etc.

4. ENGINE-1 RESCUE TOOLS

5. HOLMATRO RESCUE TOOLS Spreaders 3242-UL M ax. Working P ressure: 10,500 PSI / 720 bar 19,595 lbs Max Spreading Force ¼ inch Max Spreading Distance 42.5 lbs Weight 33”x11 ½”x 8” Dimensions Oil volume required- opening 26 cu in closing 17.3 cu in

6. HOLMATRO SPREADERS 3242- UL A. Quick-action couplings B. Dead-man’s handle C. Carrying handle D. Arm E. Spreading Tips F. Safety relief valve A. Quick-action couplings B. Dead-man’s handle C. Carrying Handle D. Arm E. Spreading Tips F. Safety relief valve G. Do not store under pressure Leave small gap between tips G. Proper storage spacing

7. HOLMATRO RESCUE TOOLS Combi Tool 3150-UL Max. Working Pressure: 10,500 PSI / 720 bar 67,600 lbs Max Cutting Force in Cutting Notch 28,300 lbs Max Cutting Force in Central Cutter 14 ¼ inch Max Spreading Distance 35 lbs Weight 33”x 9”x 7” Dimensions Oil volume required- opening 12.6 cu in closing 16.8 cu in

8. HOLMATRO COMBI TOOL3150- UL A. Dead-man’s handle B. Carrying handle F. Proper storage spacing C. Arm D. Spreading Tips E. Cutting Notches A. Dead-man’s handle B. Carrying Handle C. Arm D. Spreading Tips E. Cutting Notches F. Do not store under pressure Leave small gap between tips G. Quick action couplings –not shown H. Safety Relief Valve –not shown

9. HOLMATRO RESCUE TOOLS Cutters 3020-UL Max. Working Pressure: 10,500 PSI / 720 bar 63,400 lbs Max Cutting Force 5¼ Max Blade Opening 27 ½ lbs Weight 33”x11 ½”x 8” Dimensions Oil volume required- opening 26 cu in closing 17.3 cu in

10. HOLMATRO CUTTERS 3020- UL E. Proper storage spacing A. Dead-man’s handle B. Carrying handle D. Cutting Blade C. Blade Arm A. Dead-man’s handle B. Carrying Handle C. Blade Arm D. Cutting Blade E. Do not store under pressure Leave small gap between tips F. Quick action couplings –not shown G. Safety Relief Valve –not shown

11. HOLMATRO RESCUE TOOLS Ram 3321-UL Max. Working Pressure: 10,500 PSI / 720 bar 36,460 lbs Max Spreading Force 9 ¾” Max Opening 29 lbs Weight 21 ¼ ”x 15 ”x 4 ¾ ” Dimensions Oil volume required- opening 34.2 cu in closing 10 cu in

12. HOLMATRO RAM 3321- UL B. Safety relief valve A. Quick-action couplings C. Dead-man’s handle F. Proper storage spacing D. Cross Heads E. Cylinder G. Ram Extensions 39” 20” 10” D. Cross Heads

13. HOLMATRO RAM EXTENSION D. Ram Extensions C. Cross Head A. Female & Male Snap Lock B. Align Notch

14. HYDRAULIC HOSES PROPER USAGE 1. Do Not Kink Hoses 2. Do Not pull the hoses to move the tools. 3. Prevent twisting of the hose 4. Do Not use hoses to keep equipment in position. (especially if hoses are pressurized) 33 FT LENGTH 100 FT LENGTH PRE-CONNECTED

15. Hydraulic Hose Quick Connect Couplings Female coupling Locking Sleeve Coupling dust caps Male Coupling Maintenance Avoid allowing dirt inside of the couplings. Remove dirt and oil with a clean dry rag. Clean with mild soap and water. You may Lubricate the coupling with hydraulic oil or by spraying WD-40. Spray behind the locking sleeve and the back end of the coupling. (Location A) A NOTE : After removing dust caps from the hydraulic hoses, make sure to secure the dust caps on the power unit by fastening them together around the frame. This keeps the dust caps from getting dirty and getting lost .

16. HOLMATRO ACCESSORY PULLING CHAINS 9 FT 4.5 FT Pulling attachment tips with hooks Pulling chains Pulling chains: rated at chain strength grade 80, system 8, allowing a 2-1 safety working load with the rescue Holmatro tools. Material: Alloy steel, heat treated

17. HOLMATRO POWER UNIT 2035 PHU A. Relief Valve with Connection Coupling H. Engine Switch ON/OFF (Back Side) J. Speed Switch G. Fuel ON/OFF Switch B. Hydraulic oil dipstick and Fill I. Starting Cord K. Engine oil drain plug C. Exhaust D. Choke switch E. Fuel Cap F. Air filter M. Hydraulic oil drain plug (underneath) L. Engine oil dipstick/filling nozzle (Back Side)

18. ENGINE-1 PORTABLE POWER UNIT OPERATIONS Ensure Proper PPE’s are worn during operation. Connect proper tool for rescue operations to the hydraulic hose found on the shelf above the hydraulic tools. Check fuel level, oil level, and hydraulic fluid levels, and ensure connections are secure. Ensure the Engine ON/OFF switch is in the On position. Ensure your fuel ON/OFF switch is in the On position. COLD START- ensure choke is in the On position and speed switch is on the fast position. Pull starting chord to start the engine. Once engine starts, turn off choke switch, and adjust engine speed. You are now ready to operate your Holmatro Tool. Turn the Operating Relief Valve to the Operation position. H. Engine Switch ON/OFF

19. HOLMATRO POWER UNIT 2035 PHU (continued ) L. Engine oil dipstick/filling nozzle A. Relief Valve with Connection Coupling I. Starting Cord J. Speed Switch HONDA 4 stroke engine 2.5 HP

20. ENGINE-1 FIXED POWER UNIT OPERATIONS Turn on Engine, and Power to the GEN/PTO inside the Engine Cab. Follow Steps A,B,C Turn on breaker main and corresponding breakers. Ensure Proper PPE’s are worn during operation. Engine-1 Master A. Turn Ignition switch to the ON position. B. Press Engine Start Toggle switch C. Turn On GEN. PTO Toggle switch

21. ENGINE-1 FIXED POWER UNIT OPERATIONS PTO CIRCUIT BREAKER Circuit Breaker PTO 2. Turn on breaker main and corresponding breakers.

22. HOLMATRO POWER UNIT 2035 GU A. ON- OFF C. Connection Coupling B. Frame D. Pre-connected Hydraulic Hose E. Hydraulic oil dipstick / fill F. Operating Relief Valve 4. Check hydraulic fluid levels and ensure connections are secure. 5. Connect proper tool for rescue operations to the pre-connected hydraulic hose reel. 6. Turn the ON-OFF switch to the ON position depressing the GREEN button.

23. HOLMATRO POWER UNIT 2035 GU A. ON- OFF B. Operating Relief Valve C. Connection Coupling 7. Turn the Operating Relief Valve to the Operation position. 8. You are now ready to operate your Holmatro Tool.

24. REMEMBER: SAFTEY FIRST END OF SLIDE SHOW