Hydrogeology Introduction with basic terms

Hydrogeology Introduction with basic terms

1. Introduction to Hydrogeology With Basic Terminalogies

2. Hydrology: Processes governing the depletion and replenishment of water resources of land areas of the earth. Dealing with ground water Hydrogeology : Mode of occurrence, distribution, movement and chemistry of water occurring in the subsurface in relation to the geological environment. Geohydrology : Emphasising the hydrologic aspect.

3. Importance Evaluation of surface water- required parameters- precipitation, infiltration, slope Evaluation of ground water-required parameters-geometry of basin, storage, yield, properties of aquifer Mineral prospecting and mining- Sulphide minerals-1ppm Zinc Evaluation of sites for geotechnical construction– reservoir and dam

4. Problem related to pollution Proper management of water resource- Problem- excess extraction of ground water– depletion of water level, subsidence of land surface---- both by artificial recharge Excess use of surface water for irrigation– water logging--- by conjuctive use

5. Groundwater development Stratigraphy Petrography Structural Geology Geomorphology ------ Presence of aquifer, type of aquifer, dimension of aquifer, lithofacies variation productivity, quality of water, structure of formation

6. Water resource Ocean- 97% Ice caps 2% Deep ground water 0.31% Fresh water 0.69% (surface water 3%, subsurface 97%)

7. Hydrogeology and environment Construction of reservoir—shallow water table Deforestation---reduce infiltration and recharge, increase runoff and erosion and evaporation Waste disposal--- water quality (water pollution)

8. Hydrologic cycl e : The circulation of water from the ocean to the atmosphere , atmosphere to the lithosphere and lithosphere to the ocean occurring through complex and independent process including precipitation, runoff, ground water flow, evaporation and transpiration, is called hydrologic cycle.

9. The stages of the Hydrological Cycle.

10. Hydrologic cycle Precipitation Evaporation Transpiration Evapotranspiration Field capacity Wilting point Consumptive use Conjunctive use Infiltration Run off

11. 1.Precipitation: It is atmospheric discharge of water in the form of the solid, liquid from the earth surface. The distribution of water on the surface and subsurface is governed by duration and intensity of precipitations .

12. 2 . Evaporation and transpiration : It is the process by which water is returned to the atmosphere. Evaporation: Sublimation: Transpiration:

13. Factors affecting evaporation Meteorological— R adiation,temperature,humidity,wind , pressure Physical factors : water quality, shape and size of evaporating surface

14. ( i ) Wilting point : Lowest amount of moisture that is held by soil, not available for transpiration by vegetation, is the wilting point (ii)Field capacity : The maximum water that the soil can hold against the force of gravity. Available soil moisture : Difference between field capacity and wilting point

15. 1. Transpiration : The part of water reaching the ground is evaporated through the leaves. 2. Evapo-transpiration :The umulative loss by evaporation and transpiration (i) Consumptive use : Term includes water used in plant metabolism and evapo -transpiration.

16. 4. Infiltration : Moving of precipitated water in to subsurface. The rate of infiltration depends on the rain fall intensity , duration and texture of materials.

17. Runoff . Runoff is the water discharged through stream consisting wholly, or in part, of water contributed by overland flow ( surface runoff ) and ground water flow ( base flow ).

18. Vertical distribution of water or kind of ground water Zone of aeration Zone of saturation

19. Above water table Soil water Pellicular water Vadose Pearched water Capillary water

20. Below water table Free water Confined water Fixed water Connet water

21. Zone of saturation Aquifer Aquitard Aquiclude Aquifuge

22. Types of aquifer Unconfined or water table or phreatic Confined or artesian or pressure Leaky or semi confined