Introduction About Theodolite Instrument Theoretical part

Plane and Applied Surveying -2
Theodolite Theoretical part -1
Prepared by
Asst. Prof. Salar K. Hussein
Asst. Lecturer Mr. Kamal Yaseen
Overview
v Introduction About Theodolite Instrument
v Theodolite and its classification
v Parts of Theodolite
v Theodolite Axis and conditions
v Setting up the Theodolite
v Levelling & Centring - the Theodolite
v Readings in the Theodolite
v Theodolite – Instrument Checks
v Sources of errors
Erbil Polytechnic University
Technical Engineering College
Civil Engineering Department

1. Plane and Applied Surveying -2
Theodolite Theoretical part -1
1
Prepared by
Asst. Prof. Salar K. Hussein
Asst. Lecturer Mr. Kamal Yaseen
Technical Engineering College
Civil Engineering Department

2. Overview
vIntroduction About Theodolite Instrument
vTheodolite and its classification
vParts of Theodolite
vTheodolite Axis and conditions
vSetting up the Theodolite
vLevelling & Centring -the Theodolite
vReadings in the Theodolite
vTheodolite –Instrument ChecksvSources of errors
2

3. Introduction About Theodolite Instrument
theodoliteisapreciseSurveyinginstrumentusedfor
measuringanglesboth(horizontallyandvertically).Theodolite
canrotatealongtheirhorizontalaxisaswellastheirvertical
axis.
.Theodolitescanalsobeusedtomarkoutstraightandcurved
linesinthefield.Determiningthedifferenceinelevation,
settingoutcurves…etc.
3

4. The following are the different purposes for which the
theodolite can be used:
1-Measuring horizontal angles.
2-Measuring Vertical angles.
3-Measuring deflection angles.
4-Measuring magnetic bearing.
5-Measuring the horizontal distance between two points.
6-Finding the vertical height of an object.
7-Finding the difference in elevation between various points.
8-Ranging a line.
4

5. Parts of a Theodolite
1 -Tripod
It should be of a rigid type capable of fixing the position of the instrument with a small lateral movement on its top when required.
2 -Foot screws
These are provided for leveling the instruments.
3 -Plate level
Provided for checking the level of the instrument.
4 -Horizontal clamp
Provided to clamp the movement in horizontal plane.
5 -Vertical clamp
For clamping movement in vertical plane.
5

6. 6 -Telescope
In a telescope vertical hair is used for horizontal angle measurement while horizontal hair is used for vertical angle measurement. Focusing arrangement for the object glass is usually
provided in the body of the telescope. Collimator is provided to bring the object in the field
of view.
7 -Vertical axis
It is the axis around which the telescope rotates in horizontal plane.
8 -Horizontal axis
It is the axis around which telescope rotates in vertical plane.
9 -Angle reading arrangement
In screen display you can note angle measurements taken with Theodolite
6

7. 10 -Optical plummet
It is provided forcentering the instrument over a ground station.
7
Optical plummet

8. 8

9. Theodolite Axis
1-V-V axis (Vertical axis or Rotation axis).
2-L-L axis (Plate Bubble axis).
3-Z-Z axis (Line of Sight axis).
4-H-H axis (Transit axis).
5-P.V.C. (Plan of Vertical Circle).
6-P.H.C. (Plan of Horizontal Circle).
9

10. Components of theodolite
Trivet
vItisacircularplatehavingacentral,threadedholeforfixingthetheodolite
onthetripod
vTribrach
Itisatriangularplatecarryingthreefootscrewsatitsends.
10Trivet
Tribrach

11. Components of theodolite
Screws:
Atheodoliteinstrumenthasnumberofscrewsasitscomponentparts.These
areclassifiedintodifferenttypesdependingontheirfunctions.
Levelling Screws (Crosshairs by Theodolite)
Clamp Screws
Tangent Screws
11

12. Components of theodolite
Leveling Screws:
These are present in the leveling head of a theodolite in between trivet and tribrach.
These screws are used for leveling the instrument; to make plate level axis
horizontal.
12
Levelling screws

13. 13

14. 14

15. Hold Theodolite by its handle
Attach to tripod head
Do not leave the handle until the theodolite
is attached to the tripod

16. Temporary Adjustment
Temporary Adjustment
Ateachstationpoint,beforetakinganyobservation,itisrequiredtocarryoutsome
operationsinsequence.Thesetofoperationsthosearerequiredtobedoneonan
instrumentinordertomakeitreadyfortakingobservationisknownastemporary
adjustment.
TemporaryadjustmentofaVerniertheodoliteconsistsoffollowingoperations:
ØSetting out,
ØCentring,
ØLevelling
ØFocussing.
16

17. Temporary Adjustment
Setting out
1-Beforeremovingthetheodolitefromitsbox,itshouldbeguaranteedthat
•Thetripodheadisapproximatelylevel
•Thetripodlegsarefirmlyfixedintheground
17

18. Temporary Adjustment
Centring:
The operation involved in placing the vertical axis of the instrument exactly over
the station mark is known as centring.
1-The approximate centring of the
instrument is done by moving the
tripod legs radially.
18

19. Temporary Adjustment
2. Next Place the instrument on the tripod head. Supporting
it with one hand, the centeringscrew on the bottom of the
unit to make sure it is secured to the tripod.
19

20. Temporary Adjustment
3-Looking through the optical plummet eyepiece, turn the optical plummet eyepiece
to focus on the reticle.
Turn the optical plummet focussing ring to focus on the survey point
20

21. Temporary Adjustment
Levelling
Levelling of an instrument is done to make the vertical axis of the instrument truly vertical. Generally,
there are three levelling screws and two plate levels are present in a theodolite instrument.
Step 1:Bring one of the level tube parallel to any two of the foot screws, by rotating the upper part of
the instrument.
Step 2:The bubble is brought to the centre of the
level tube by rotating both the foot screws either
inward or outward. The bubble moves in the same
direction as the left thumb.
21

22. Temporary Adjustment
Step 3:The bubble of the other level tube is then brought to the centre of the level
tube by rotating the third foot screw either inward or outward. [In step 1 itself, the
other plate level will be parallel to the line joining the third foot screw and the centre
of the line joining the previous two foot screws.]
Step 4:Repeat Step 2 and step 3
in the same quadrant till both the
bubble remain central.
22

23. Temporary Adjustment
Step 5:By rotating the upper part of the instrument through 180°, the level tube is
brought parallel to first two foot screws in reverse order. The bubble will remain in the
centre if the instrument is in permanent adjustment.
Otherwise, repeat the whole process starting from step1 to step5.
23

24. 24

25. Position a
25

26. 26

27. Temporary Adjustment
Focusing
To obtain the clear reading, the image formed by the objective lens should fall in the plane of
diaphragm and the focus of eye-piece should also be at the plane of diaphragm.
Thus, focusing operation involves two steps:
ØFocusing of the eye-piece lens.
ØFocusing of the objective lens.
27

28. 2 -Permanent Adjustments
These are to be tested after a long interval or at the beginning of an important
project. The field party is only expected to carry out the test and adjustment, if
required will be done by the trained for this purpose in a workshop.
Permanent Adjustments for a theodolite .
First adjustment: -to make the axis of the plate levels perpendicular to the vertical
axis
Second adjustment: -to make the line collimation agree with the optical axis of the
telescope
Adjustment of Horizontal Hair:-
Adjustment of Vertical Hair:-
28

29. Permanent Adjustments
Third adjustment:-
To make the horizontal axis perpendicular to the vertical axis
Forth adjustment:-
To make the bubble –tube axis of the telescope parallel to the line of collimation ,
to test this adjustment , the two –peg test
29

30. Definitions
Face left:
Face left observation while taking the reading if the vertical circle is towards the left of the observer, it is
called face left observation.
Face Right:
Face right observation –while taking
readings if the vertical circle is towards the
right of the observer then it is called face
right observation (this condition is also
called telescope inverted condition)
30

31. Sources of errors
1-Personal errors
2-Instrumental errors
3-Natural of errors
1-Personal errors :
Errors which result from the possibility of the observer the same for every observer the
potential of audio-visual and sensory and non-perfect in these senses cause this type of
errors
31

32. 2-Instrumental errors: The errors resulting from devices used in the monitoring result of
not making devices and measuring instruments up to the degree of perfection.
3-Natural of errors:
The errors that a rise as a result of continuing changes in the factors of
1-wind
2-air temperature
3-pressure.
32