IoT BASED DESIGN AND DEVELOPMENT OF SOLAR ASSISTED PESTICIDE SPRINKLER.pdf

To ensure for the future purpose

1. PROJECT MEMBERS:
LIVIN J 19ME526
PRADEEP U 19ME540
SACHIN PIRABHU R 19ME545
VISWAK V S 19ME558
SNSCollegeofTechnology
(An Autonomous Institution)
Coimbatore-35
PROJECT GUIDE:
Mr. M. Balaji
AssistantProfessor/Mechanical
SNS College of Techonolgy
Coimbatote-35
REVIEW 01

2. INDUSTRY DETAILS
IndustryName:ProgressiveMachineBuilders
IndustrialGuide:ShanmugamS
EmailID :[email protected]
Contact :9366615595/0422–4399503
Location : D.No.67,Nethaji Nagar,
NanjundapuramRoad,
Coimbatore-641 036.

3. INTRODUCTION
Here we are fabricating the agriculture machine is a new innovative model which
is mainly used to water spraying, seed sowing. Our main aim of this concept is to
reduce the man power and also avoid time consumption and to utilize solar energy. The
entire assembly is controlled by app which is made on IOT app maker and the brain of
this project is the Arduino Uno which controls all the motors and pump by receiving
signals from the app with help of a wifimodule (ESP8266), Arduino stores the code
which is encoded into it by Arduino encoder. Entire assembly is moved by motors.

4. OBJECTIVES
Themainobjectiveistoutilizetheinherentlyavailablesolar energy in spraying operations.
Tocutdownthecostemployedforspraying machines.
Decreasingtheoperationalcostbyfurtherintroducingnewmechanisms.
Todecreaselaborcostsby advancing thespraying methods.
Toconsumezeroelectricity.
Uninterruptedsprayingoperationatthefield throughouttheyear

5. METHODOLOGY
In our project all the components are placed on the base frame. There are four
wheels to move this machine. The spraying nozzle is coupled with the motor to spray
for moving the nozzle. Then the water is pumped from the water tank to the sprayer
nozzle. The hopper and the motor setup is used for sowing the seeds. Seed sprayer set
up consists of four pipes around the main in right angle to each other. The seed sprayer
is used for spraying the seeds over the land. All motors are taken the energy from the
storage battery. The battery is charged by the sun light by using the solar panel which
is attached in this vehicle. After all the motors are switched ON, then the vehicle can
be moved by remote control over the agricultural field.

6. LITERATURE REVIEW
Joshua, R., Vasu, V. and Vincent, P., “Solar Sprayer -An Agriculture Implement”,
InternationalJournalofSustainableAgriculture2(1): 16-19,2010
Sukhatme, S.P., “Handbook of solar energy”, New Delhi,TataMcGraw-Hill: ISBN
0-07-462453-9,2001
S.Charvani, K.Sowmya, M.Malath, P.Rajani4, K.Saibaba“Design And Fabrication
Of A SolarSprayer” National Conference on Innovative Trends in Science and
Engineering, page no 237to244may2017
Akshay,M.N.andWaghmare,G.,“Designandfabricationofsolaroperatedsprayer
foragriculturalpurpose”NationalConferenceon Innovative Trends in Science and
Engineering, Vol. 4, No. 7,2016.