ISBT Agra Bus training Presentation .pptx

dhruvkumar7409330673 41 views 16 slides Jul 17, 2024
Slide 1
Slide 1 of 16
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16

About This Presentation

ISBT Bus service training ppt


Slide Content

Summer training in Upsrtc Isbt Agra Upsrtc bus are in categeries Pink seva Supper fast Express Shatabddi express General rath Up Roadwayas

DAYALBAGH EDUCATION INSTITUTE AGRA Supervisor Name- buddh prakash gautam Formain Name- Ajaydeep Sharma Service manager-K. K. Singh Submitted by Deepak kumar 2104498 Automobile

ABOUT UPSRTC ISBT WORKSHOP FOR UTTAR PRADESH ROADWAYS BUSES IS SITUATED IN ISBT MAINTENANCE WORK OF ROADWAYS PASSANGER VEHICLE IS DONE HERE WHICH INCLUDES SPARE REPLACEMENT ,LUBRICATION INSPECTION ,REPAIR, TESTING ETC OF DIFFERENT PARTS OF VEHICLES. MOST OF JOB IS MANUALLY IN DIFFERENT SECTION PROVIDED FOR MAINTENANCE AND REPAIR OF DIFFERENT PARTS OF AUTOMOBILE.

WORKSHOP HAS FOLLOWING SECTIONS :1) Maintaness After travelling 40000 running out 2) Tyre section and air 3) Body section 4) Paint section 6) Electrical and electronics section 7) Speair parts section 8) Diesel fuel machine section 9 ) welding section

Maintenance After 40000 Travelling Running out BS 4/6 Model bus Engine oil check Greesing in parts Stearing oil check Breack oli check Indicaters in check

Tyre section After 40,000 runs, the bus is checked with tires etc., which if the tires are correct then the rear tires overtake The front tyres. With this, if the condition of the tire is very bad, then it is changed and along with the change, numbers are noted on those tires which are written with code words and the tire is opened and kept in Stephanie and with that the tire is pinched and inflated

Body section In the body section, the work of body was done, which body is repaired etc., which would tear the sheet or make it noiseless in a good way, if it vibrates, then the repair of the mechanism is done under it, in which all the work of the body is done. Repairs related to the body are done. For this, steel sheets etc. Are installed and set by.

Paint section In the paint section, the bus is painted and repaired, if it becomes old then it is given a brand new look by having the back printed on it and the same is written from where the return is written. Where needed

Electric section Electrical work is done in the electric section which includes checking its battery, alternator, repairing switch head light, Virgo indicator and board display, board rechecking sensor and etc. All the electrical related work is done.

Speair parts section In the spare parts section, there is a problem in the bus or there is a problem, which has to be changed by putting goods in it or breaking and lifting, which comes under emergency, which is done only after maintaining the complete register by the foreman. Is given to What is the problem with which car? Which lesson is being read? Only after all this is registered, the goods are given and signed by the foreman and the spare part is changed and the old one is kept as long as possible.

Diesel fule machine Diesel fuel machine section, in which diesel fuel is filled in any bus UP North UPSRTC bus, which is first entered in the workshop, after that after informing the office inspection, there is a register mention for acceptance. The amount of diesel to be filled in the bus is first approved by the oil representative and then checked by the driver and co-instructor and the number of that bus is noted.

Welding section Did welding work in welding station. Also someone broke down in the bus. Be it a disturbance like bumper etc. Or an accident in any vehicle. Welding is done by looking at it, which is done by electric welding.

THANK YOU
Tags