Latent fingerprint development

Fingerprint

1. By :
TEJASVI
BHATIA
Latent Fingerprint Development

2. CONTENTS
Definitions
Latent print residue
Why are fingerprints important in Criminal
Investigation?
Where are latent fingerprints found?
Items to be included in a fingerprint field kit
Methods of development
I.Physical methods
II.Chemical methods
Conclusion
References

3. DEFINITIONS
Fingerprintsare the distinctive ridge outlines
which appear on the bulb on the inside of the end
joints of the fingers and thumbs.
Latent fingerprints have been defined as the
markings of oily matter or perspiration from the
skin glands, left upon any surface which the
hands and fingers may have touched. These are
invisible , and require developing or “disclosing”
treatment to make them visible.

4. LATENT PRINT RESIDUE
Latent fingerprints are composed of several
chemicals exuded through the pores in the
fingertips and left on virtually every object
touched.
The primary component of latent fingerprints is
sweat. Sweat is 99% water, and will dry after a
fairly short period of time.
The other components of latent fingerprints are
primarily solid and can remain on a surface for a
much longer period of time. They include amino
acids, glucose, lactic acid, peptides, riboflavin,
proteins, lipids, potassium, sodium, calcium, and
numerous others.

5. WHY ARE FINGERPRINTS
IMPORTANT IN CRIMINAL
INVESTIGATION?
The potential aids offered to law enforcement by
fingerprints are numerous as:-
I.Fingerprints are unique. No two individuals
have identical fingerprints.
II.Fingerprints do not change throughout the life
span of an individual.
The finger markings on some lethal weapon
often determine whether the act was that of
suicide or murder.
Latent fingerprints are found on various objects
that come in contact with a suspects hands at a
crime scene. As these are unique ,a suspect
can be identified as the perpetrator of a crime.

6. WHERE ARE LATENT
FINGERPRINTS FOUND?
I.Smooth, Non-Porous surfaces
II.Rough, Non-Porous surfaces
III.Paper and Cardboard
IV.Plastic Packaging Material
V.Soft Vinyl (PVC), Rubber, and Leather
VI.Metal (Untreated)
VII.Unfinished Wood
VIII.Wax and Waxed Surfaces
IX.Adhesive-Coated Surfaces

7. FINGERPRINT FIELD KIT
Fingerprint powders
2 brushes for dark and light powders
2 feather dusters for light and dark powders
Latent print lifting material
Mounting material
Fingerprint record cards
Supply of cards for mounting latents(black and
white)
Fingerprint ink
Glass plate for inking

8. Complete post mortem outfit for printing corpses:-
I.Pair of scissors
II.Pair of rubber gloves
Notebook
Flashlight
Atomizer for applying powder
Atomizer for applying chemicals

9. METHODS OF DEVELOPMENT
These include:-
Physical methods
Chemical methods

10. PHYSICAL METHODS
POWDERING METHODS
This method of developing latent fingerprints is
based on the simple physical phenomenon of
adhering. The powder substances when applied
to the latent fingerprints in a proper and
systematic manner ,adhere to the secretions left
on the object bearing latent fingerprints.
The most commonly used powders are black and
grey powders.
Black powders are used for developing prints on
white or light colored surfaces and grey powders
are used on dark colored surfaces to give
maximum contrast.

11. FINGERPRINTDEVELOPMENT
GREY POWDER BLACK POWDER

12. FLUORESCENT POWDERS
When the latent impressions are to be developed
on a multicolored surface, the use of powder of
one color does not prove useful because of lack
of contrast of the developed print against
multicolored background. Such type of
impressions are developed with fluorescent
powders which can be applied like other powders.
The prints developed with fluorescent powders
glow under ultraviolet light and they can be
photographed on an ordinary film.
These powders are available in a variety of colors
like green, red and yellow.

13. FINGERPRINT DEVELOPMENT
•Backgroundsurfacescontaining
multiplecoloursareoften
processed withfluorescent
powder,asthebrillianceofthe
powderwillcontrastwiththe
backgroundallowingfordetailed
photography.OrangeFluorescent
Powderfluoresceswithaforensic
lightsourceunderUltravioletor
bluewavelengths.Powdershould
beappliedwithanOrangeFeather
Brush.

14. XEROX TONERS
The black colored Xerox toners in powder form
can also be used to develop latent fingerprints.
these can also be fixed(rendered permanent ) on
the object by applying some heat.

15. METHOD OF DEVELOPMENT
The selected powder is lightly applied to the
suspected surface with a fine fingerprint brush.
The brush is applied firstly in one direction and
then in the other direction and when the ridges
start appearing the brushing is done in a way that
its motion follows the flow of ridges. When
sufficient powder adheres to the impression ,the
excess powder is carefully brushed away with a
light soft touch.
When the object is small and movable ,it can be
tilted to remove the sprinkled fingerprint powder.
The excess powder on the print is removed
carefully by soft and light touches of the brush.

16. LIFTING POWDERED PRINTS
When the developed fingerprints cannot be
readily photographed due to physical location of
such prints, they have to be lifted from that
surface for comparison purposes and permanent
recording.
The fingerprint lifters include photographic paper,
transparent tapes and opaque lifters.
The sticky surface of the fingerprint lifter is
pressed against the developed print in a careful
manner. When the surface of the lifter has been
uniformly pressed over the developed print, it is
carefully drawn off from the object and mounted
on a suitable card.

17. LIFTING BY TRANSPARENT
TAPES
Afterapplyingthetape,thefingerprint
isliftedandmountedonablackora
whitecardincludedinthefingerprint
kit.

18. IODINE FUMING METHOD
This method depends on the principle that when
the oily and fatty deposits of the latent
impressions come in contact with the iodine
fumes produced by subjecting iodine crystals to
slight heat, they become visible in yellowish
brown color. These prints are however not
permanent, and should be photographed before
they begin to fade and are at their full intensity.
Iodine fuming can be carried out in a closed
chamber or with the help of an iodine fuming
pipe.

19. FINGERPRINT DEVELOPMENT

20. DEVELOPED FINGERPRINT

21. CHEMICAL METHODS
These methods include:-
I.Silver nitrate method
II.Ninhydrin method
III.Osmic acid method

22. SILVER NITRATE METHOD
This method is based on the fact that the sodium
chloride of the deposited perspiration in the latent
impression reacts with silver nitrate solution to
form silver chloride which is light sensitive.
When exposed to light, it breaks into its
component silver and chloride. The developed
prints are reddish brown in color.
A 5% silver nitrate solution is generally used for
this purpose.

23. NINHYDRIN METHOD
The development of latent prints with ninhydrin is
based on the chemical reaction of ninhydrin with
amino acids which are present in perspiration
causing the formation of purple reddish stains
that render latent impressions visible.
Normally 1.5% solution of ninhydrin is used.

24. DEVELOPED FINGERPRINTS
Ruhemann
Purple

25. OSMIC ACID METHOD
This method is based on the reaction of osmic
acid vapors with oily matter of the latent
impressions. When osmic acid vapors come in
contact with sebaceous matter, it is reduced to
metallic osmium which is blue colored.
The solution is prepared by dissolving 3 grams of
osmic acid in 100cc of carbon tetrachloride, ether
or ethyl alcohol.

26. CONCLUSION
It has been aptly said that the criminal’s own hand
is his greatest enemy. As the most important aid
to the sense of touch, the hand and fingers meet
frequently with the surrounding objects and
surfaces, thus producing evidential markings that
may serve either to condemn or to vindicate the
accused.

27. REFERENCES
Lee, Henry & R.E. Gaensslen. Advances in
Fingerprint Technology, 2nd Ed. CRC Press.
Boca Raton, Florida.
Bridges , B.C. practical fingerprinting . Funk
and Wagnallas company, New York,1942
http://www.onin.com/fp

28. THANK YOU