Layout design on MICROWIND

Basics of Layout design on MICROWIND

1. To generate layout for CMOS Inverter
circuit and simulate it for verification.

2. VLSI Lab
VLSI
LABORATORY
FRONT END
DESIGN
(CAD)
BACK END
DESIGN
(CAD)
TECHNOLOGY
(TCAD)

3. Proper hardware
Proper software
Foundry or link up with some fab lab
Test facility
Purpose

4. DESIGN STEPS
•SCHEMATIC
•LAYOUT DESIGN
•DRC
•LAYOUT Vs SCHEMATIC
•PARASITIC EXTRACTION
•POST LAYOUT SIMULTION

5. List of Experiments
1.To generate layout for CMOS Inverter circuit and simulate it for verification.
2.To prepare layout for given logic function and verify it with simulations.
3.Introduction to programmable devices (FPGA, CPLD), Hardware Description
Language (VHDL), and the use programming tool.
4.Implementation of basic logic gates and its testing.
5.Implementation of adder circuits and its testing.
6.Implementation of J-K and D Flip Flops and its testing.
7.Implementation 4 to 1 multiplexer and its testing.
8.Implementation of 3 to 8 decoder and its testing.
9.Implementation of sequential adder and its testing.
10.Implementation of BCD counter and its testing.
11.Simulation of CMOS Inverter using SPICE for transfer characteristic.
12.Simulation and verification of two input CMOS NOR gate using SPICE.
13.Introduction to Block Diagram Mathod
14.Design of digital Logic using block diagram.

6. Project
•Mini Project: VHDL/Verilog based mini project
with emphasis on design and implementation
into the group of maximum 3 students.

7. Design Abstraction Levels
n+n+
S
G
D
+
DEVICE
CIRCUIT
GATE
MODULE
SYSTEM

8. Microwind
•Microwind is a tool for designing and
simulating circuits at layout level. The tool
features full editing facilities (copy, cut, past,
duplicate, move), various views (MOS
characteristics, 2D cross section, 3D process
viewer), and an analog simulator

9. Tools from Microwind
•Microwind
•DSCH
•Microwind3 Editor
•Microwind 2D viewer
•Microwind 3D viewer
•Microwind analog simulator
•Microwind tutorial on MOS devices
•View of Silicon Atoms

10. Getting Microwind
•Go to the website
http://www.microwind.net/document
•Download the freeware version of the
microwind
•Unzip the files in a Folder

11. Microwind Downloads

12. INTRODUCTION THE TOOL
User-friendly and intuitive
design tool for educational
use.
The student draws the
masks of the circuit layout
and performs analog
simulation
The tool displays the layout
in 2D, static 3D and
animated 3D


Editing window
One dot on the
grid is 5
lambda, or
0.175 µm
Editing icons
Access to
simulation
2D, 3D views
Simulation
properties
Layout
library
Active technology
Palette of layers


Ion current
Voltage
cursors
List of model
parameters
for BSIM4


Memory effect due to
source capacitance
Threshold voltage effect

13. Our Approach
1.
2.
3.
4.
MOS DEVICE
Traditional teaching : in-depth
explanation of the
potentials, fields, threshold
voltage, and eventually the
expression of the current
Ids
Our approach : step-by-step
illustration of the most
important relationships
between layout and
performance.
1. Design of the MOS
2. I/V Simulation
3. 2D view
4. Time domain analysis

14. Feature Size
•Chips are specified with set of masks
•Minimum dimensions of masks determine transistor
size (and hence speed, cost, and power)
•Feature size f = distance between source and drain
•Set by minimum width of polysilicon
•Feature size improves 30% every 3 years or so
•Normalize for feature size when describing design
Rules
•E.g. λ = 0.090 μm in 0.180 μm process

15. Layout design rules:
For complex processes, it becomes difficult to
understand the intricacies of the fabrication
process and interpret different photo masks.
They act as interface between the circuit designer
and the process engineer.

16. Editing IconsAccess to
Simulation
2D 3D Views
Layout Library
Simulation Properties
Palette of Layers
Active Layers
Current Technology
Work Area
One dot on the grid is
5 lambda or 0.30 µm
Menu Command
Microwind Environment

17. Microwind Layout using
Verilog Code
•Design Schematic in DSCH and eport Verilog code for Circuit.
•
Import Verilog file (.v) in microwind.
•This process is possible only for digital.(As digital components are possible in
Verilog)

18. Run on DSCH
Save File
Select Foundry
Make Verilog File
Import Verilog File
LayoutVerilog File
Select Foundry in Microwind
DSCH
to
Microwind
using
VERILOG

19. Design Rules
N- Well
r101 Minimum width 12λ
r102 Between wells 12 λ
r110 Minimum well Area 144 λ
2
r 102r 101
N -
Well

20. r201Minimum N+ and P+ diffusion width4λ
r 201
r 201
N -
Well
P+ Diff
N+ Diff

21. r202Between two P+ and N+ diffusions4λ
N -
Well
P+ Diff
N+ Diff
r 202
r 202

22. r203Extra N-well after P+ diffusion 6λ
N -
Well
P+ Diff
N+ Diff
r 203
r 203

23. r204 Between N+ diffusion and n-well6 λ
r 204
N -
Well
P+ Diff
N+ Diff

24. r210Minimum diffusion area16λ
2
r 210
r 210
N -
Well
P+ Diff
N+ Diff

25. r301Polysilicon Width 2λ
N -
Well
P+ Diff
N+ Diff
Polysilicon
r 301
r 301
Polysilicon

26. r302Polysilicon gate on Diffusion2λ
N -
Well
P+ Diff
N+ Diff
Polysilicon
r 302
r 302
Polysilicon

27. r307Extra Polysilicon surrounding Diffusion 3λ
N -
Well
P+ Diff
N+ Diff
Polysilicon
r 307
r 307
r 307
r 307
Polysilicon

28. r304Between two Polysilicon boxes 3λ
N -
Well
P+ Diff
N+ Diff
Polysilicon
Polysilicon
r 304
r 304

29. r307Diffusion after Polysilicon 4λ
N -
Well
P+ Diff
N+ Diff
Polysilicon
Polysilicon
r 307
r 307
r 307
r 307

30. r401Contact width2λ
Contact
Polysilicon Contact
Metal/Polysilicon Contact
r 401

31. r404Extra Poly surrounding contact1λ
Contact
Polysilicon Contact
Metal/Polysilicon Contact
r 404
r 404

32. r405Extra metal surrounding contact1λ
Contact
Polysilicon Contact
Metal/Polysilicon Contact
r 405 r 405

33. N -
Well
P+ Diff
N+ Diff
Polysilicon
Polysilicon
r403Extra diffusion surrounding contact1λ
r 403
r 403

34. Metal 1
Metal 2
Metal 3
Metal 4
Metal 5
Metal 6
r 501
r 501
r501Between two Metals 4λ

35. r510Minimum Metal area 16λ
2
r 510 r 510
r 510r 510
r 510 r 510
Metal 1
Metal 2
Metal 3
Metal 4
Metal 5
Metal 6

36. Step 1: Select Foundary

37. Step 2: Select Foundary

38. Step 3: n+ Diffussion

39. Step 4: Polysilicon

40. Step 5: n+diff and Metal Contact

41. •This Completes nMOS design
•Now go for pMOS Design, and the first need is
to construct N Well

42. Step 6: Create N Well

43. Step 6: p+ Diffusion

44. Step 7: Polysilicon

45. Step 8: Contacts

46. Final Connections
•pMOS Completed
•Now Interconnection of pMOS and nMOS to
complete inverter
•Connect Source of pMOS to VDD and Source of
nMOS to VSS.
•Short the Drain of both pMOS and nMOS.

47. INVERTER: Complete Design

48. Check DRC

49. Assign Source
•Assign Signal (Clock) to Gate Terminal
•Add Visible node at Output

50. Inverter with Source

51. Run Simulation

52. VTC Characteristics

53. For Analog Circuits
(R, L and C Components)
if drain and gate is shorted then MOS will behave as a diode connected load
and it will never go to triode region and can be used as resistive load offering a
resistance equal to 1/gm.
if drain and source is shorted then MOS capacitor in which SiO2 will behave as
insulator.

55. Direct layout design of Analog
Circuits…

56. Thanks
Give Your Feedbacks at:
www.amitdegada.weebly.com/blog.html