Nanowires presentation

1. An Introduction to
NanoWires
University of South Alabama
Electrical engineering department
And Their Applications
Amir Dindar
Shoeb Roman

2. •Bottom-up assembled nanoscale electronics
could hold the promise of powering future
electronic devices that can outperform existing
devices and open up totally new opportunities.
•It will require conceptually new device building
blocks, scalable circuit architectures, and
fundamentally different fabrication strategies.
•Central to the bottom-up approach are the
nanoscale building blocks.
University Of South Alabama, EE Department
An Introduction to Nanowires and their applications
Introduction

3. •1D nanostructures represent the smallest
dimension structure that can efficiently transport
electrical carriers
•1D nanostructures can also exhibit critical device
function, and thus can be exploited as both the
wiring and device elements in future
architectures for functional nanosystems
•In this regard, two material classes:
semiconductor nanowires (NWs)
carbon nanotubes (NTs)
have shown particular promise
Introduction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

4. Single-walled NTs have been used to fabricate
field effect transistors, diodes, and logic circuits.

Problems with Nanotubes to made devices:
•Difficulties to control whether building blocks are
semiconducting or metallic
•Difficulties in manipulating individual NTs
So, to date, device fabrication by NT largely is a
random event, thus pose a significant barrier to
achieving highly integrated nanocircuits.
Introduction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

5. Advantages of Nanowires:
•NW devices can be assembled in a rational and predictable
because:
–Nanowires can be precisely controlled during synthesis,
–chemical composition,
–diameter,
–length,
–doping/electronic properties
•Reliable methods exist for their parallel assembly.
•It is possible to combine distinct NW building blocks in
ways not possible in conventional electronics.
•NWs thus represent the best-defined class of nanoscale
building blocks, and this precise control over key variables
has correspondingly enabled a wide range of devices and
integration strategies to be pursued
Introduction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

6. •Semiconductor NWs have been assembled
into a series of electronic electronics
devices:
–crossed NW p-n diodes,
–crossed NW-FETs,
–nanoscale logic gates and computation
circuits,
–optoelectronic devices
•More general applications:
–Interconnects for nano electronics
–Magnetic devices
–Chemical and biological sensors
–Biological labels
Introduction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

7. •Diameter of nanowires range from a single atom to a few
hundreds of nanometers.
•Length varies from a few atoms to many microns
•Different name of nanowires in literature:
–Whiskers, fibers: 1D structures ranging from several
nanometers to several hundred microns
–Nanowires: Wires with large aspect ratios (e.g. >20),
–Nanorods: Wires with small aspect ratios.
–NanoContacts: short wires bridged between two larger
electrodes.
•Regarding to size (diameter) we have two different types
of nanowires:
–Classical nanowires
–Quantum nanowires
Introduction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

8. Different techniques can be generally grouped into
four categories:
•Spontaneous growth:
–Evaporation condensation
–Dissolution condensation
–Vapor-Liquid-Solid growth (VLS)
–Stress induced re-crystallization
•Template-based synthesis:
–Electrochemical deposition
–Electrophoretic deposition
–Colloid dispersion, melt, or solution filling
–Conversion with chemical reaction
•Electro-spinning
•Lithography (top-down)
Building Blocks Synthesis
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

9. General Idea:
•Anisotropic growth is required
•Crystal growth proceeds along one direction,
where as there is no growth along other
direction.
•Uniformly sized nanowires (i.e. the same
diameter along the longitudinal direction of a
given nanowire)
Building Blocks Synthesis,
Spontaneous Growth
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

10. •Referred to as Vapor-Solid (VS) technique.
•Nanowires and nanorods grown by this method
are commonly single crystals with fewer
imperfections
•The formation of nanowires or nanorods is due
to the anisotropic growth.
•The general idea is that the different facets in a
crystal have different growth rates
•There is no control on the direction of growth of
nanowire in this method
Spontaneous Growth,
Evaporation condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

11. Spontaneous Growth,
Evaporation condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
(Picture from: “Nanostructures of zinc oxide,” by Zhon Lin Wang, http://www.materialstoday.com/pdfs_7_6/zhang.pdf)

12. Spontaneous Growth,
Evaporation condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Mesoporous, single-crystal ZnO nanowires .
(Picture from: “Nanostructures of zinc oxide,” by Zhon Lin Wang, http://www.materialstoday.com/pdfs_7_6/zhang.pdf)

13. Spontaneous Growth,
Evaporation condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture : Measuring the Work Function at a Nanobelt Tip and at a Nanoparticle surface, http://www.nanoscience.gatech.edu/zlwang/paper/2003/03_NL_2.pdf

14. Spontaneous Growth,
Evaporation condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Ultra-narrow ZnO nanobelts.
(Picture from: “Nanostructures of zinc oxide,” by Zhon Lin Wang, http://www.materialstoday.com/pdfs_7_6/zhang.pdf)

15. •Differs from Evaporation-condensation
•The growth species first dissolve into a solvent
or a solution, and then diffuse through the
solvent or solution and deposit onto the surface
resulting in the growth of nanorods or
nanowires.
•The nanowires in this method can have a mean
length of <500 nm and a mean diameter of ~60
nm
Spontaneous Growth,
Dissolution condensation
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

16. General Idea:
A second phase material, commonly referred to as
catalyst, is introduces to direct and confine the
crystal growth on a specific orientation and within a
confined area.
–Catalyst forms a liquid droplet by itself
–Acts as a trap for growth species
–The growth species is evaporated first and
then diffuses and dissolves into a liquid
droplet
–It precipitates at the interface between the
substrate and the liquid

Spontaneous Growth,
Vapor Liquid Solid Growth (VLS)
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

17. Spontaneous Growth,
Vapor Liquid Solid Growth (VLS)
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Growth species in the catalyst droplets
subsequently precipitates at the growth surface
resulting in the one-directional growth

18. Spontaneous Growth,
Vapor Liquid Solid Growth (VLS)
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture : “A Non-Traditional Vapor-Liquid-Solid Method for Bulk Synthesis of Semiconductor Nanowires,” Shashank Sharma, and Mahendra K. Sunkara,
http://www.cvd.louisville.edu/Publications/recentpublications/proceedings_mrs_fall2001.pdf

19. Spontaneous Growth,
Vapor Liquid Solid Growth (VLS)
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
TEM and selected area diffraction image of a single
crystal ZnO nanorod.(~20 nm width).
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

20. Spontaneous Growth,
Vapor Liquid Solid Growth (VLS)
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Z-contrast scanning transmission electron microscopy image of a
(Zn,Mg)O nanorod with a Ag catalyst particle at the rod tip.
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

21. General Idea:
•This is the very general method
•Use in fabrication of nanorods, nanowires, and
nanotubes of polymers, metals, semiconductors,
and oxides.
•Some porous membrane with nano-size
channels (pores) are used as templates from
conduct the growing of nanowires
•Pore size ranging from 10 nm to 100 mm can be
achieved.
Template Base synthesis
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

22. •Electrochemical Deposition
–Negative template
–Positive template
•This is a self-propagating process
•This method can be understood as a special
electrolysis resulting in the deposition of solid
material on an electrode
•Only applicable to electrically conductive
materials: metals, alloys, semiconductors, and
electrical conductive polymers.
Template Base synthesis
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

23. Negative Template
•use prefabricated cylindrical nanopores in a solid
material as templates

•There are several ways to fill the nanopores to form
nanowires, but the electrochemical method is a
general and versatile method.
•Electrodeposition often requires a metal film on one
side of the freestanding membrane to serve as a
working electrode on which electrodeposition takes
place
•If dissolve away the host solid material, free-
standing nanowires are obtained.
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

24. •The diameter of the nanowires is determined by the
geometrical constraint of the pores
•Fabrication of suitable templates is clearly a critical
first step
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

25. A porous Template
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: “Fabrication of Polypyrrole Nanowire and Nanotube Arrays,” Fa-Liang Cheng*, Ming-Liang Zhang and Hong Wang,
http://www.mdpi.net/sensors/papers/s5040245.pdf
Nanowire array

26. Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: “Fabrication of Polypyrrole Nanowire and Nanotube Arrays,” Fa-Liang
Cheng*, Ming-Liang Zhang and Hong Wang,
http://www.mdpi.net/sensors/papers/s5040245.pdf
nano wires grown in
a 80nm template
membrane after
dissolution of the
membrane.
75 nm
210nm
100nm

27. Advantages
•The ability to create highly conductive nanowires .
Because electrodeposition relies on electron transfer,
which is the fastest along the highest conductive
path.
•electrodeposited nanowires tend to be dense,
continuous, and highly crystalline in contrast to
other deposition methods.
•the ability to control the aspect ratio of the metal
nanowires by monitoring the total amount of passed
charge.
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

28. Three typical stages in electrodeposition
process:
stage I: corresponds to the electrodeposition of
metal into the pores until they are filled up to
the top surface of the membrane (stage I)
Stage II: the pores are filled up with deposited
metal, metal grow out of the pores and forms
hemispherical caps on the membrane surface
Stage III: When the hemispherical caps
coalescence into a continuous film
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

29. stage I
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: Template Synthesis of Nanowires in Porous Polycarbonate Membranes: Electrochemistryand Morphology, http://www.phys.ens.fr/~bachtold/publication/wire-JPCB.pdf

30. stage II
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: Template Synthesis of Nanowires in Porous Polycarbonate Membranes: Electrochemistryand Morphology, http://www.phys.ens.fr/~bachtold/publication/wire-JPCB.pdf

31. stage III
Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: Template Synthesis of Nanowires in Porous Polycarbonate Membranes: Electrochemistryand Morphology, http://www.phys.ens.fr/~bachtold/publication/wire-JPCB.pdf

32. Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•To have freely standing nanowires we have to remove
the template hosts after forming the nanowires in the
templates by dissolving away the template materials in a
suitable solvent.
•If want to separate the nanowires from the metal films on
which the nanowire are grown, a common method is to first
deposit a sacrificial metal.

33. Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Positive Template Method
•Use wire-like nanostructures, such as DNA and carbon
nanotubes as templates.
•Nanowires are formed on the outer surface of the
templates
•Diameter of the nanowires is not restricted by the
template sizes and can be controlled by adjusting the
amount of materials deposited on the templates
•Removing the templates after deposition, wire-like and
tube-like structures can be formed

34. Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
DNA based template
DNA is an excellent choice as a template to fabricate
nanowires because its diameter is ~2 nm and its length
and sequence can be precisely controlled
General procedure:
Fix a DNA strand between two electrical contacts
Exposed to a solution containing some ions
Ions bind to DNA and are then form some nanoparticles decorating along the
DNA chain

35. Template Base synthesis,
Electrochemical Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
DNA based template
General procedure:
•Fix a DNA strand between two electrical contacts
•Exposed to a solution containing some ions
•Ions bind to DNA and are then form some nanoparticles
decorating along the DNA chain

36. Template Base synthesis,
Electrophoretic Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Differs from electrochemical deposition in several aspects
The deposit need not be electrically conductive
Particularly for oxide nanowires: SiO2, TiO2, Bi2O3, etc.
Different sizes of TiO2 nanorods grown in a membrane by sol
electrophoretic deposition.
Diameters: (A) 180 nm, (B) 90 nm, (C) 45 nm
Picture: “A study on the growth of TiO2 nanorods using sol electrophoresis,” S. J. LIMMER, T. P. CHOU, G. Z. CAO, University of Washington,
http://faculty.washington.edu/gzcao/publications/papers/31.pdf

37. Template Base synthesis,
Electrophoretic Deposition
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Method:
•over the surface of nanoparticles develops an electrical
charge via some chemical techniques. This combination is
typically called Counter-Ion
•Upon application of an external electric filed to a system
of charged nanosize particle system, the particles are set
in motion in response to the electric filed
•This type of motion is referred to as electrophoresis.
•The rest of this technique, in general, is the same as
electrochemical deposition.

38. Template Base synthesis,
Surface Step-Edge Templates
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
General Idea
•Atomic-scale steps on a crystal surface can be used as
templates to grow nanowires.
•The method takes the advantage of the fact that deposition of
many materials on the surface often starts preferentially at
defect sites, such as surface step-edges.
•The problem is that these nanowires can not be easily
removed from the surface on which they are deposited

39. Nanowires are promising materials for many
novel applications
Not only because of their unique geometry ,
but also because they possess many
unique physical properties, including :
–electrical
–magnetic
–optical
–mechanical
Properties and Application of Nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

40. Different Nanowires
We can categorize different types of nanowires
regarding to the materials as follows:
•Metal nanowires
•Semiconductor nanowires (Silicon nanowires)
•Oxide nanowires
•Multi-segment nanowires
•Semiconductor quantum wires
Properties and Application of Nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

41. The changes in properties arise from
quantum confinement.
•Quantum confinement describes how the
electronic and optical properties change when
the sampled material is in sufficiently small
amounts, typically 10 nanometers or less.
•Specifically, the phenomenon results from
electrons and holes being squeezed into a
dimension that approaches a critical quantum
measurement.
Properties and Application of Nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department

42. Properties and Application of Nanowires,
Magnetic Properties
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•Actually the magnetic properties of nanowires depend on the wire
diameter and aspect ratio
•It is possible to control the magnetic properties of the nanowires
by controlling the fabrication parameters
•Remanence ratio, which measures the remanence magnetization
after switching off the external magnetic field
•Coercivity, which is the coercive field required to demagnetize the
magnet after full magnetization.
•Giant Magnetoresistance (GMR)
In a viscous solvent, magnetic field can be used to
orient the growing nanowires.

43. Properties and Application of Nanowires,
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Optical properties
•Controlling the flow of optically encoded
information with nanometer-scale accuracy over
distances of many microns, which may find
applications in future high-density optical
computing.
•Silicon nanowires coated with SiC show stable
photoluminescence at room temperature

44. NanoElectronic Applications of nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
The most important application of nanowires in
nanoelectronics is using them as junctions or as
multi-segment nanowires or crossed
nanodevices.
Potential application of nanowires is in:
• very dense logic
• dense memory
• optoelectronics
• sensing devices

45. NanoElectronic Applications of nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Sensing Devices
A structure for transport measurements sensor by nanowires
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

46. NanoElectronic Applications of nanowires,
Quantum wire Transistor
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Recent advances in formation methods allowed the
fabrication of silicon quantum-wire transistors
•The quantum wires have a width of 65 nm and are fully
embedded in silicon dioxide.
•A coulomb staircase, that is, step-like conductance versus
gate voltage, was observed at temperature below 4.2 K.
•Some techniques used Single electron Transistor based on
a 30 nm wide Si NW, which can be operate at 77 K. The
device showed clear single electron tunneling and well-
defined single island and two tunnel junctions.

47. NanoElectronic Applications of nanowires,
Single Electron Memory
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•Single electron memory cells consume extremely
low power and can be realized by using the
coulomb blockade effect.
•Important components of such a device are a silicon
nanowire as a channel , a silicon nanodot as a
storage node, and a silicon nanogate as a control
gate.
•To realize these memory devices, narrow Si NWs
need to be generated.

48. NanoElectronic Applications of nanowires,
Metal Semiconductor Junction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•Junctions between carbon nanotubes and silicon
nanowires has been done.
•To fabricate NT/SiNW junctions, SiNWs are
grown from the end of the NT tips.
•It has a characteristic the same as metal-
semiconductor Schottkey diode.

49. NanoElectronic Applications of nanowires,
Metal Semiconductor Junction
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
(Picture from: “Controlled growth and electrical properties of heterojunctions of carbon nanotubes and silicon nanowires,” Jiangtao Hu et al.
, http://cmliris.harvard.edu/publications/1999/nature399_48.pdf)

50. NanoElectronic Applications of nanowires,
Metal Nanowire
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
SEM micrograph of single ZnO nanowire bridging two Al/Pt/Au Ohmic contact
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

51. NanoElectronic Applications of nanowires,
Hierarchical Assembly Nanowires
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
First: methods are needed to assemble NWs into
highly integrated arrays with controlled orientation
and spatial position.
Second: approaches must be devised to assemble
NWs on multiple length scales and to make
interconnects between nano-, micro- and macroscopic
worlds.
In this regard, there are two promising approaches:
Electrical field-directed assembly
Fluidic flow-directed assembly.

52. Hierarchical Assembly Nanowires,
Electrical Field-Directed Assembly
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•Electrical fields can be used effectively to attract and align NWs
due to their highly anisotropic structures and large polarizabilities
•Can also be used to position individual NWs at specific positions
with controlled directionality
•can be carried out in a layer-by-layer fashion to produce
crossed NW junctions.
Limitations
•The need for conventional lithography to pattern microelectrode
arrays used to produce aligning fields
•The effect of fringing electric fields at the submicron length
scales.

53. Hierarchical Assembly Nanowires,
Electrical Field-Directed Assembly
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
E-field-directed assembly of NWs. (a) Schematic view of E-field alignment. (b) Parallel array of NWs aligned between two
parallel electrodes. (c) Spatially positioned parallel array of NWs obtained following E-field assembly. The top inset shows 15
pairs of parallel electrodes with individual NWs bridging each diametrically opposed electrode pair. (d) Crossed NW junction
obtained using layer-by-layer alignment with the E-field applied in orthogonal directions in the two assembly steps.
Picture: “Integrated nanoscale electronics and optoelectronics: Exploring nanoscale science and technology through semiconductor nanowires,”
Yu Huang1,2,‡ and Charles M. Lieber3. Pure Appl. Chem., Vol. 76, No. 12, pp. 2051–2068, 2004.

54. Hierarchical Assembly Nanowires,
Fluidic Flow-Directed Assembly
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•NWs can be aligned by passing a suspension of
NWs through microfluidic channel structures over
a flat substrate, so all of the NWs are aligned
along the flow direction.
•Can be used to organize NWs into more complex
crossed NW structures, which are critical for
building high-density nanodevice arrays, using a
layer-by-layer deposition process.

55. Hierarchical Assembly Nanowires,
Fluidic Flow-Directed Assembly
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Fluidic flow-directed assembly of NWs.
(a,b) Schematic (a) and SEM image (b)
of parallel NW arrays obtained by
passing a NW solution through a
channel on a substrate; (c,d)
Schematic (c) and SEM image (d) of
crossed NW matrix obtained by
orthogonally changing the flow
direction in a sequential flow alignment
process. (e,f) Schematic (e) and SEM
image (f) of regular NW arrays
obtained by flowing NW solution over a
chemically patterned surface. (g,h)
Parallel and crossed NW device arrays
obtained with fluidic flow assembly.
Picture: “Integrated nanoscale electronics and optoelectronics:
Exploring nanoscale science and technology through semiconductor
nanowires,”
Yu Huang1,2,‡ and Charles M. Lieber3. Pure Appl. Chem., Vol. 76, No. 12,
pp. 2051–2068, 2004.

56. Nanoelectronic application of Nanowires,
Crossed Nanowire devices
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
The crossed NW structure
can be configured into a
variety of devices, such as
diodes and transistors.
A p-n diode can be
obtained by simply
crossing p- and n-type NW.
Picture: “Indium phosphide nanowires as building blocks for nanoscale electronic
and optoelectronic devices,” Xiangfeng Duan,
http://www.phy.cuhk.edu.hk/~jfwang/PDF/2001 Nature InP NW.pdf

57. Nanoelectronic application of Nanowires,
Crossed Nanowire devices
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
(c) Schematics illustrating the
crossed NW-FET concept. (d)
Gate-dependent I-V
characteristics of a cNW-FET
formed using a p-NW as the
conducting channel and n-NW
as the local gate. The red and
blue curves in the inset show
Isd vs. Vgate for n-NW (red)
and global back (blue) gates
when the Vsd is set at 1 V.
The conductance modulation
(>105) of the FET is much
more significant with the NW
gate than that with a global
back gate (<10).
Picture: “Integrated nanoscale electronics and optoelectronics: Exploring nanoscale science and technology through semiconductor nanowires,”
Yu Huang1,2,‡ and Charles M. Lieber3. Pure Appl. Chem., Vol. 76, No. 12, pp. 2051–2068, 2004.

58. Nanoelectronic application of Nanowires,
Crossed Nanowire devices
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
SEM micrograph of ZnO nanowire Schottky diode and
its I-V curve both in the dark and with UV illumination
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

59. Nanoelectronic application of Nanowires,
Crossed Nanowire devices
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
SEM micrograph of fabricated FET.
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

60. Nanoelectronic application of Nanowires,
Crossed Nanowire devices
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
SEM micrographs of ZnO MOSFET structure
Pictures : “ZnO nanowire growth and devices,” Y.W. Heoa, D.P. Nortona, et al., Materials Science and Engineering R 47 (2004) 1–47

61. Hierarchical Assembly Nanowires,
Nanoscale Logic Gates and Computational Circuits
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
•Diodes and transistors represent two basic device
elements in logic gates.
•Crossed NW p-n diodes and NW-FETs enable more
complex circuits, such as logic gates to be produced.
•A two-input logic OR gate was realized using a 2(p)
by 1(n) crossed NW p-n diode array
•A two-input logic AND gate can also be realized
using two diodes and one NWFET
•Similarly NOR gate with three NWFETs in series

62. Hierarchical Assembly Nanowires,
Nanoscale Logic Gates
and Computational Circuits
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Picture: “Integrated nanoscale electronics and optoelectronics: Exploring
nanoscale science and technology through semiconductor nanowires,”
Yu Huang1,2,‡ and Charles M. Lieber3. Pure Appl. Chem., Vol. 76, No. 12, pp. 2051–
2068, 2004.

63. CONCLUSION
An Introduction to Nanowires and their applications
University Of South Alabama, EE Department
Challenges:
•The insufficient control of the properties of individual
building blocks
•Low device-to-device reproducibility
•Lack of reliable methods for assembling and integrating
building blocks into circuits
Advances:
•Synthesis of nanoscale building blocks with precisely
controlled chemical composition, physical dimension, and
electronic, optical properties
•Some strategies for the assembly of building blocks into
increasingly complex structures
•New nanodevice concepts that can be implemented in
high yield by assembly approaches