Organic composting

12,200 views 41 slides Feb 06, 2018
Slide 1
Slide 1 of 41
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27
Slide 28
28
Slide 29
29
Slide 30
30
Slide 31
31
Slide 32
32
Slide 33
33
Slide 34
34
Slide 35
35
Slide 36
36
Slide 37
37
Slide 38
38
Slide 39
39
Slide 40
40
Slide 41
41

About This Presentation

Dr. S. Prashant


Slide Content

C OMPOSTING OF ORGANIC WASTE

About 70% of municipal waste is normally organic Organic waste is characterized by high carbon content Organic waste mainly consists of carbohydrates, fats, proteins, nucleic acids, cellulose, hemicellulose and lignin. Organic waste can cause problems of smell, leachate, gas, and stray animals in landfills Recycling at source is most economic and environment friendly method of waste management Simple methods available - Compost Compost is valuable resource for farmers Why composting?

Composting: The process of breakdown of biodegradable organic waste to produce stable, nutrient rich compost through the natural, exothermic process of aerobic decomposition.

Composting: natural biological process, but for rapid composting and consistent quality, environmental conditions must be controlled end product (compost) bears little resemblance to original wastes from which the compost was made typically dark brown to black in colour , with crumbly texture and earthy odour

ORGANIC WASTE COMPOST

Finished compost humus-like, resembling rich topsoil resistant to further microbial decomposition

Uses of compost H igh organic matter content => valuable soil amendment M ay be used as low-grade fertilizer to supplement plant nutritional needs M ay be used to condition heavy clay or mineral soils P romotes proper balance between air and water in soils A ids water infiltration, absorption, and ion exchange in soils Promotes the growth of useful soil flora and suppresses pathogens.

What can be composted? any waste material with a high organic matter content is a potential candidate used more recently for: sewage sludges industrial wastes (e.g. food, pulp & paper) yard and garden wastes municipal solid wastes (up to 70% organic matter by weight)

Compost Preparation waste collection sorting into organic and inorganic reduce size if necessary adjust moisture content starters/additives adjust C:N ratio

Compost preparation place prepared waste in piles, windrows, chamber or bins turn the compost regularly or arrange other ways to aerate the waste regularly monitor temperature & moisture

Temperature during composting process

Controlling composting To achieve maximum composting for any organic material, certain environmental conditions must be maintained in the compost pile may be classified into interdependent biological conditions physical conditions chemical conditions

THE BIOLOGICAL ENVIRONMENT Key organisms: bacteria fungi Actinomycetes - play active role in decomposing organic matter

THE BIOLOGICAL ENVIRONMENT Secondary organisms: earthworms insects other soil invertebrates play a less significant role in decomposition process compared to microorganisms more important in mechanical breakdown of wastes (chewing, burrowing, movement, aeration)

Fate of organic matter in compost Carbon-containing compounds are consumed by microorganisms and converted to: microbial tissues carbon dioxide water humic breakdown products Heat is released as a result of microbial metabolic activity => temperature in pile increases

Humic breakdown products resulting from one type of microbial activity may be used as a food and energy source by another generation or type of microbes Chain of succession continues until there is little decomposable organic material remaining COMPOST

COMPOST Stable end product composed of: living and dead microbial cells and cell fragments byproducts of microbial decomposition undecomposed particles (organic and inorganic)

Microbial succession in compost piles A wide variety of microorganisms naturally present in most nontoxic agricultural wastes, yard wastes, or mixed municipal wastes ==> number and type of available organisms generally not a limiting factor Depending upon environmental conditions, certain microbial groups may predominate at certain stages in the decomposition process

THE CHEMICAL ENVIRONMENT determined largely by the composition of the waste materials to be composted Important factors influencing the chemical environment for composting: adequate food / energy sources for microorganisms balanced amount of nutrients adequate water content adequate oxygen acceptable pH range lack of toxic substances that could inhibit microbial activity

Food / energy sources for compost microbes microbes rely on organic carbon compounds to meet energy needs Carbon in natural or synthetic organic substances varies in degradability, e.g.: sugars easily metabolized by most microbes lignins in wood or paper degraded more slowly, by fewer groups plastic very resistant to breakdown

Food / energy sources for compost microbes As degradable organic compounds are decomposed: small portion of the carbon goes into microbial cells large portion of carbon converted to CO 2 and lost to the atmosphere => reduction in weight and volume of waste

Food / energy sources for compost microbes More resistant carbon compounds form the matrix for the physical structure of finished compost. Most municipal, yard, and agricultural wastes have adequate biodegradable carbon to support microbial activity

Nutrients for compost microbes nitrogen, phosphorus, and potassium are most important nutrients nitrogen is usually the limiting nutrient CARBON to NITROGEN (C:N) RATIO IS CRITICAL IN DETERMINING THE RATE OF DECOMPOSITION.

C:N ratio established on the basis of decomposable rather than total carbon ratio lower than 30:1 is desirable higher ratios result in slower decomposition rates adjusted by co-composting with different materials

Typical C:N ratios for waste products: Manure - 15:1 to 20:1 Yard wastes - 20:1 to 80:1 Municipal wastes - 40:1 to 100:1 Wood chips - 400:1 to 700:1

Moisture in compost piles ideal moisture: 50% to 60% by weight most wastes do not contain enough moisture => composting process slowed down unless water is added excess water causes problems in compost piles: leachate generation, anaerobic conditions, rotting, and obnoxious odours loss of moisture occurs through evaporation => controlled by adjusting the size and shape of the compost pile

Oxygen in compost piles aerobic decomposition is required for odour-free, rapid composting pile should have enough void space to allow gas exchange with the atmosphere 5% to 15% oxygen concentration is considered adequate piles aerated by mechanical turning, air injection

pH in compost piles pH of 6 - 8 considered ideal Level of acidity / alkalinity affects: nutrient availability solubility of (potentially toxic) heavy metals overall metabolic activity of microbes

pH in compost piles pH may be adjusted upwards by the addition of lime (calcium carbonate), but most organic substances are naturally well-buffered with regard to pH change slight tendency towards acidification as compost matures, due to production of carbonic acid

THE PHYSICAL ENVIRONMENT Includes factors such as: particle size temperature mixing pile size and shape

small particle size promotes rapid decomposition due to increased surface area-to-volume ratio However: if all particles are small, they pack together and create dense, anaerobic compost => particles should have enough surface area to promote microbial activity, but have enough air spaces to permit gas exchange with the atmosphere

Co-composting used to achieve better balance of particle sizes (e.g. small-particle sewage sludge mixed with large-particle wood chips) Particle size reduction by grinding is occasionally done before composting; sometimes undertaken after composting to improve aesthetic appeal of finished product

Temperatures in the compost pile Different microbes have different optimal temperature ranges: psychrophiles (cool - below 20 o C) mesophiles (warm - 20 o to 40 o C) thermophiles (hot - 40 o to 80 o C) sub-optimal temperatures interfere with metabolic activity and reproduction of microbes

as temperatures increase above the maximum threshold, cell proteins are destroyed and the microbes die most effective temperature range for efficient composting is 55 o to 75 o C (thermophile range)

Thermophiles: promote rapid decomposition destroy pathogens Temperatures in excess of 55 o C are required for at least 3 days to ensure pathogen destruction If compost pile is large enough, internal heat will allow composting in subzero conditions

COMPOSTING TECHNIQUES Small-scale home composting: simple compost heaps

COMPOSTING TECHNIQUES Small-scale home composting: box or barrel composters

COMPOSTING TECHNIQUES Small-scale home composting: commercial composter units

COMPOSTING TECHNIQUES Small-scale home composting: digester units

COMPOSTING TECHNIQUES Commercial composting: windrows aerated static piles in-vessel composting systems

PROCESSING OF MUNICIPAL COMPOST Removal of bulky items Particle size reduction (grinders, shear shredders, hammermills) Screening (size requirements) Magnetic separation Moisture addition and mixing Composting (numerous techniques) Postprocessing: screening, curing, storage, marketing, application
Tags