Osi Model Interview Questions & Answers

In this slideshow, we have discussed Top 10 interview questions on topic OSI model

Q1. Define OSI layers.
Q2. Are there alternative models to the OSI model? If yes, define it.
Q3. What are the differences between TCP and UDP?
Q4. What is the importance of the OSI Physical Layer?
Q5. Which layers perform error detection and recovery functions?
Q6. How the network administrator detect the problem?
Q7. What is the difference between flow control and error control?
Q8. What is Data Encapsulation?
Q9. MAC address works on which layer? What are the differences between MAC sublayer and LLC sublayer?
Q10. What is the difference between half-duplex and full-duplex?

website: http://allabouttesting.org

Disclaimer: This SlideShare is for educational purpose only.

Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.

1. Interview Questions &
Answers
OSI Model
http://www.allabouttesting.org

2. Q. Define OSI layers.
OSI stands Open System Interconnection. There are 7 layers in OSI model.
OSI model helps networking professional in understanding information flow from
one source to destination.
Although, OSI model notperforming any function in the networking process.
http://allabouttesting.org

3. Q. Are there alternative models to the
OSI model? If yes, define it.
•TCP/IP is the alternate model that also explains the information flow in the
network.
•It is simpler representation in comparison to OSI model but contains fewer details
of protocols than OSI model.
http://allabouttesting.org

4. Q. Whatarethe differences between
TCP and UDP?
Following are differences in TCP and UDP,
•TCP is connection oriented protocol while UDP is
connectionless protocol.
•TCP is more reliable than UDP.
•UDP is faster for data sending than TCP.
•UDP makes error checking but no reporting but TCP makes
checks for errors and reporting.
•TCP provides guaranteed Delivery of Data but UDP has no
guarantee.
•Header size of TCP is 20 bytes while that of UDP is 8 bytes.
http://allabouttesting.org

5. Q. What is the importance of the OSI
Physical Layer?
•Physical layer resembles actual transfer of information from
source to destination in form ofbit stream -electrical impulse,
light or radio signal.
•In simple words, it accepts a frame from data link layer and
convert it into bits. Also accepts bits from physical medium and
convert it into the frame.
•Common protocols for this layer are EIA/TIA-232, EIA/TIA-449,
X.21, HSSI, V.24, V.35 and SONET.
http://allabouttesting.org

6. Q. Which layers perform error
detection and recovery functions?
•On receiving and while transmission of information, Layer 2 -Data Link layer
decoded and encoded data into bits.
•The data link layer is further divided into two sublayers: The Media Access
Control (MAC) layer and the Logical Link Control (LLC) layer. This layer also
performs error checking and flow control.
•Protocols:
•Serial Line Internet Protocol (SLIP)
•Point-to-Point-Protocol (PPP)
•Address Resolution Protocol (ARP)
•Reverse Address Resolution Protocol (RARP)
•Layer 2 Forwarding (L2F)
•Layer 2 Tunneling Protocol (L2TP)
•Point-2-Point Tunneling Protocol (PPTP)
•Integrated Services Digital Network (ISDN)
http://allabouttesting.org

7. Q. How the network administrator
detect the problem?
•Network Administrator use OSI model to understand the information flow and
try to find problems by further understand the protocols of each layer.
•Experience in networking reduces the time to find problems and resolve them.
Networkproblems may be a loose physical connection, configuration issues
etc.
http://allabouttesting.org

8. Q. What is the difference between
flow control and error control?
•As the name suggests, flow control controls the rate of
information transmitted to ensure efficient delivery of data to the
receiver.
•While error control checks and correct errors in the data bits and
packets.
http://allabouttesting.org

9. Q. What is Data Encapsulation?
•Data encapsulation is a process of adding extra information at
each layer of OSI model while information flow from one host to
another host.
•Information such as source and destination address, protocol
information, type of data etc.
http://allabouttesting.org

10. Q. MAC address works on which layer?
What are the differences of MAC sublayer
and LLC sublayer?
•MAC sublayer stands for Media Access Control layer.MAC
address works on Layer 2-Data Link Layer. This layer controls
the permission of data to transmit it.
•LLC sublayer stands for Logical Link Control layer. This layer
controlsframe synchronization, flow control, and error checking.
http://allabouttesting.org

11. Q. What is the difference between half-duplex
and full-duplex?
•In half-duplex, information can flow in both direction but
not simultaneously.
•While in full-duplex,information can flow in both
direction simultaneously.
http://allabouttesting.org

12. for watching
http://allabouttesting.org

13. http://allabouttesting.org