Pilar and drill press

Types of drill press.

1. MACHINE DRILLS

2. BENCH DRILL The bench drill is used for drilling holes through materials including a range of woods, plastics and metals. It is normally bolted to a bench so that it cannot be pushed over. Larger pieces of material can be drilled safely.

3. Parts of the Bench Drill

4. PILLAR DRILL The larger version of the machine drill is called the pillar drill. This has a long column which allows it to be free standing. The longer column makes it particularly suited for larger holes using f orstner bits or a hole saws.

5. Parts of the Pillar Drill

6. SAFETY 1. Always use the plastic guard. 2. Wear goggles when drilling materials. 3. Clamp the materials down or use a machine vice. 4. Never hold materials by hand while drilling. 5. Always allow the ‘chippings’ to clear the drill by drilling a small amount at a time. 6. Follow all instructions from the teacher carefully .