FUJITA ENGINEERING INDIA PRIVATE LIMITED TEMPORARY ELECTRICITY Trainer: OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 2 1.0 PURPOSE The purpose of this procedure is to provide the necessary methods for controlling the use of temporary electricity on site. Temporary electricity can be classed as one of the most potentially dangerous areas of risk that exists on a construction site, and it is important that an adequate procedure is in place.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 3 2.0 SCOPE This procedure applies to all FJT project worksite and facilities, site temporary electrical equipment including site distribution systems, power tools, welding transformers, lighting, power generation and any other piece of electrical equipment not required for the permanent works.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 4 3.0 DEFINITIONS Temporary electricity applies to all temporary power supplies and equipment used in connection with the execution of the construction works.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 5 4.0 RESPONSIBILITIES Project Manager delegates ownership to Electrical Engineer/Superintendent to ensure compliance and implementation. Electrical Engineer conducts audits and evaluates effectiveness.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 6 5.0 Approved Person Electrical Responsibilities include maintaining a register, tagging equipment, conducting inspections, and reporting concerns.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 7 General Safe Work Practices Key safety guidelines including keeping hands off connected apparatus, questioning unauthorized personnel, and ensuring a clean workspace.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 8 Power Generators Guidelines for maintaining and operating generators, including proper fuel storage and earthing.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 9 Distribution Distribution boards must have Earth Leakage breakers, secure enclosures, and proper cable management.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 10 Hand Tools Tools must be insulated, properly rated, and in good condition.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 11 Extension Cords Guidelines for safe usage, including avoiding daisy-chaining and overloading.
KEEP EACH OTHER SAFE OCCUPATIONAL HEALTH, SAFETY AND ENVIRONMENT DEPARTMENT 12 6.0 APPENDICES Electrical safety inspection checklist - Retention: 3 Years.
SAFETY FIRST THANK YOU 13 "Establish the safety culture of Fujita with everyone to create zero danger!“ 「フジタの安全文化を確立し みんなでつくる危険ゼロ!」