Thin Film Interference Jennifer Whetter

This LO presents conditions for constructive and destructive thin film interference. An example of thin film interference in butter fly wings with a worked solution is provided to assist in application of the concepts and demonstrate the real life applications of this topic.

1. Learning Goal: Determine conditions for constructive and destructive
interference of light reflected from/ transmitted through thin films!
!
By Jennifer Whetter

2. THIN FILM INTERFERENCE!
Thin film: A film with a thickness of the same magnitude
as the λ of light involved (in nm)!
How it works!
White light is incident on a surface!
A portion of the light is reflected, and the rest is
transmitted through the medium!
At each successive interface (where two different
mediums meet), a portion of light is reflected, and the
rest is transmitted!
The light reflected from the interfaces will interfere!
The pattern of light that results from this interference
appears as either light and dark bands or as colorful
bands
Interface 1
Interface 2
White Light

3. CONSTRUCTIVE! DESTRUCTIVE
•When the reflected light waves A and
B are in phase, the crests and troughs
reinforce each other!
•Resultant wave, C, has a greater
amplitude than individual waves,
resulting in more intense color!
•Mathematically, two reflected waves
must be shifted by an integer number
of wavelengths!
•dsinθ=mλ where m=1,2,3,..
•When the reflected light waves A and
B are out of phase, the resulting wave
is attenuated!
•The decrease in amplitude results in a
less intense resultant color, or the lack
of color!
•Mathematically, the path difference
must be an odd number of half λ!
•dsinθ=(m+0.5)λ where m=1,3, 5,
}dsinθ }dsinθ
Note: dsinθ is the difference in path lengths (extra distance beam A must travel through medium)

4. HOW TO APPLY THE CONCEPTS
The type of interference that occurs depends on:!
The path length difference!
Whether the reflected waves are out of phase depends on the extra distance (through the film and back) that the
second ray must travel before rejoining the first ray!
A path length difference equal to an odd number of half wavelengths results in a phase shift of π radians!
Reflection!
A wave is reflected π radians out of phase when it tries to enter a medium with a lower speed of light (the refractive
index of current medium is less than the refractive index of medium it is trying to enter)!
Tips:!
You have to be very careful to account for whether a phase shift occurs at an interface where reflection is taking place!
Wavelengths (and hence interference patterns) often depend on whether or not a phase shift occurs at both, one, or
none of the interfaces

5. PRACTICE PROBLEM
A butterfly’s wings are made up of
two thin layers of a transparent
substance with a refraction index
of 1.56 called keratin. When
viewed in daylight, a portion of the
wings reflects blue light of
wavelength 475nm. Estimate the
minimum thickness of this section
of the film assuming m=1.
Morpho menelaus

6. SOLUTION
Understanding the problem!
As the refractive index of keratin is greater than the
refractive index (n) of air, ray 2 will be reflected out of
phase with ray 1 (with a phase inversion of 1/2 a λ)!
At the second interface, the ray is traveling from keratin to
air (higher to lower refractive index), and ray 5 will be in
phase with ray 1!
Since one reflection is 1/2 λ and the other is 0 λ, the net
phase inversion, Φ is 1/2 λ!
Since bright blue is observed, you are dealing with
constructive interference therefore you use the formula:!
path difference=mλ where m=1,2,3

7. Solving the problem!
Find the wavelength of blue light in keratin!
The λ of blue light is 475nm in air!
Therefore, λkeratin=λair/nkeratin=475/1.56=304nm!
Equation for thin film interference!
path difference=2t+Φ where m=1,2,3,…!
mλ =2t+1/2λ where t is thickness!
2t=mλkeratin-1/2λkeratin!
t=1/2(m-1/2)(304)!
t=1/2(1-1/2)(304)!
t=1/4(304)!
t=76nm
SOLUTION CONTINUED
minimum non-zero
thickness of keratin film

8. REFERENCES
http://www.webexhibits.org/causesofcolor/15E.html!
http://physics.bu.edu/py106/notes/Thinfilm.html!
http://www.tufts.edu/as/tampl/projects/micro_rs/theory.html!
http://dev.physicslab.org/Document.aspx?
doctype=3&filename=PhysicalOptics_ThinFilmInterference.xml