What is direct indirect lighting and what is its types?

LED direct indirect lighting is an attractive alternative to incandescent or fluorescent lighting in both residential and commercial lighting applications because they are very energy-efficient, have very long lives, are very small in size.

1. What is direct/indirect lighting and what are its types?

2. Table of Contents Direct/Indirect Lighting 1 Types of direct/indirect lighting 2 Contact Us 3

3. Direct/Indirect Lighting A direct source of light which is cast downwards from a fixture to provide lighting with uniform levels of illumination. Open, louvered, and lensed fixtures can all be “direct”. An indirect source of light which is cast upwards from a fixture and bounced down to provide lighting with minimal glare and more uniform levels of illumination. A source of light in which light is cast both upwards and downwards from a fixture to provide a combination of led direct indirect lighting illumination .

4. Types of Direct/Indirect Lighting Juno Lighting S2X2 Indy 2 x 2 LED Recessed Light Fixture Direct/Indirect Luminaire Maxlite Direct MLFP14D4535 1x4 LED Flat Panel SHO 3500K Recessed Light Texas Fluorescents | LED/T5 Direct/Indirect

5. Juno Lighting S2X2 Indy 2 x 2 LED Recessed Light Fixture Direct/Indirect Luminaire LED lighting technology offers the highest return on initial investment over the life time of the fixture. LEDs are individually spaced at small intervals to eliminate any dark spots when combined with our diffusers. LED light engine is completely removable and upgradable. LED lighting technology offers the highest return on initial investment over the life time of the fixture. Four corner tie points are standard for safety wire support when required. Built in earthquake clips standard.

6. Maxlite Direct MLFP14D4535 1x4 LED Flat Panel SHO 3500K Recessed Light This light is ideal for saving energy by retrofitting existing T12 or T8 troffer light fixtures.   A high performance LED flat panel designed to lay in to drop ceilings and typically used to replace 1’x 4’ fluorescent fixtures, MaxLite LED Flat Panels are suitable for office, school, hospital and medical facility applications.  Panels are fully dimmable, and are compatible with building controls, motion sensors, timers, and daylight harvesting systems. The LEDs enable long life, high lumen maintenance, high CRI, low maintenance, and are constructed without hazardous materials.

7. Texas Fluorescents | LED/T5 Direct/Indirect Specification grade, sturdy housing of heavy gauge steel with high reflectance white enamel finish and matte white "sky light" reflectors.  Suitable for recessed commercial and institutional applications such as offices, hospitals, schools, etc. For use with standard 15/16” grid ceiling systems. Center section is flush with outer panels, eliminating the dirt and debris from collecting. Shallow design for low clearance plenums. Flush steel hinges from either side; field reversible.

8. Contact Us Address : 6565 Sunset Blvd, Suite 416, Los Angeles, CA 90028 Phone : [phone] Email : [email protected] Website : http://www.troffers.net/