Window Aircon Installation Presentation (Steps and Tools)

Window Aircon Installation Presentation with steps how to and commonly used tools

1. Window Air Conditioner Installation Requirements

2. Common Tools Used for AC Installation 2

3. Drill 3

4. Multimeter 4

5. Wrenches 5

6. Screwdrivers 6

7. Pliers 7

8. Gloves 8

9. How to Install Window AirCon 7 Steps to Install a Window AC Unit 9

10. Remove all the pieces from your AC box to confirm all the parts were sent. Measure the width of your window, and mark the center with a pencil. Marking the spot will make installation easier and ensure the side panels evenly reach both sides of your window. Step 1 : Remove Your AC and Find the Center of Your Window 10

11. Open your window. If a weather strip is provided from the manufacturer, install it now. These strips help block any air that may pass through tiny cracks and protects your window from possible damage when you're installing or removing of the AC. Step 2 : Open and Prepare Your Window 11

12. Slide the panels into the appropriate place on your unit. Slide them all the way in and then secure the adjustable panels into your window AC using provided screws. Connect all the screws to avoid any gaps—which can let warm air, allergens, and pollution into your home. Step 3 : Attach the Side Panels 12

13. Pick up your AC and center it in your window. Then tightly close your window on top of the AC; there should be a spot where the window easily slides into place. Most of the unit's weight will be outside, so be careful lifting it into place. Once you close the window, your AC should be securely in place. Step 4 : Insert Your AC in the Window 13

14. The hard part is done! Now you’re just securing everything and finishing up. Installations vary at this stage based on the manufacturer, but most models include at least one L bracket to hold the window securely in place. Screw the L bracket or brackets to the top of the opened window. This prevents the window from being pushed up, which is the main concern once window ACs are installed. Step 5 : Install L Brackets 14

15. If provided, add the window padding to the sides of your open window (top picture above). If no padding came with your model, just extend the side panels to reach your window (bottom picture above). Then attach both side panels to your window using the screws from your manufacturer. Step 6 : Attach Panels  15

16. Select manufacturers provide brackets and screws that connect the AC to the interior windowsill. This is an extra level of security, and some manufacturers don't find it necessary. But if they're provided, screw them in now.  You're done! Plug in and turn on your AC. You should immediately feel it cooling your room.  Step 7 : Secure Unit and Start Cooling  16