[3] A. Godat, F. Hammad, O. Chaallal, State-of-the-art review of anchored FRP shear-
strengthened RC beams: a study of influencing factors, Compos. Struct. 254
(2020) 112767,https://doi.org/10.1016/j.compstruct.2020.112767.
[4] C. Soutis, Fibre reinforced composites in aircraft construction, Prog. Aerosp. Sci. 41
(2005) 143–151,https://doi.org/10.1016/j.paerosci.2005.02.004.
[5]A. Cripps, Fibre-Reinforced Polymer Composites in Construction, CIRIA, 2002.
[6] L.C. Hollaway, A review of the present and future utilisation of FRP composites in the
civil infrastructure with reference to their important in-service properties, Constr. Build.
Mater. 24 (2010) 2419–2445,https://doi.org/10.1016/j.conbuildmat.2010.04.062.
[7]C.E. Bakis, L.C. Bank, V.L. Brown, E. Cosenza, J.F. Davalos, J.J. Lesko, A. Machida, S.H.
Rizkalla, T.C. Triantafillou, Fiber-reinforced polymer composites for construction—state-
of-the-art review, J. Compos. Constr. 6 (2002) 73–87.
[8] D. Kendall, Building the future with FRP composites, Reinf. Plast. 51 (2007) 26–33,-
https://doi.org/10.1016/S0034-3617(08)70131-0.
[9] T. Kim, D.A. Foutch, Application of FEMA methodology to RC shear wall buildings
governed by flexure, Eng. Struct. 29 (2007) 2514–2522,https://doi.org/10.1016/j.
engstruct.2006.12.011.
[10]S.S. Pendhari, T. Kant, Y.M. Desai, Application of polymer composites in civil construc-
tion: a general review, Compos. Struct. 84 (2008) 114–124.
[11] L.C. Hollaway, J.G. Teng, Strengthening and Rehabilitation of Civil Infrastructures Using
Fibre-Reinforced Polymer (FRP) Composites, Elsevier Science, 2008.https://books.goo
gle.co.uk/books?id¼VaajAgAAQBAJ.
[12]L.C. Hollaway, M. Leeming, Strengthening of Reinforced Concrete Structures: Using
Externally-Bonded FRP Composites in Structural and Civil Engineering, Woodhead Pub-
lishing, 1999.
[13] F. Taheri, K. Shahin, I. Widiarsa, On the parameters influencing the performance of
reinforced concrete beams strengthened with FRP plates, Compos. Struct. 58
(2002) 217–226,https://doi.org/10.1016/S0263-8223(02)00120-4.
[14] T.J. Stratford, Strengthening of metallic structures with fibre-reinforced polymer (FRP)
composites, in: L.C. Hollaway, J.G. Teng (Eds.), Strengthening and Rehabilitation of
Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites, Woodhead
Publishing, 2008, pp. 215–234,https://doi.org/10.1533/9781845694890.215
(Chapter 8).
[15] L. De Lorenzis, Strengthening of masonry structures with fibre-reinforced polymer (FRP)
composites, in: L.C. Hollaway, J.G. Teng (Eds.), Strengthening and Rehabilitation of Civil
Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites, Woodhead Publish-
ing, 2008, pp. 235–266,https://doi.org/10.1533/9781845694890.235(Chapter 9).
[16] L. De Lorenzis, T.J. Stratford, L.C. Hollaway, Structurally deficient civil engineering
infrastructure: concrete, metallic, masonry and timber structures, in: L.C. Hollaway, J.
G. Teng (Eds.), Strengthening and Rehabilitation of Civil Infrastructures Using
Fibre-Reinforced Polymer (FRP) Composites, Woodhead Publishing, 2008, pp. 1–44,
https://doi.org/10.1533/9781845694890.1(Chapter 1).
[17]J. Custo´dio, J. Broughton, H. Cruz, A review of factors influencing the durability of struc-
tural bonded timber joints, Int. J. Adhes. Adhes. 29 (2009) 173–185.
[18]R.M. Guedes, J.L. Morais, A.T. Marques, A.H. Cardon, Prediction of long-term behaviour
of composite materials, Comput. Struct. 76 (2000) 183–194.
[19]R.M. Guedes, Lifetime prediction of polymers and polymer matrix composite structures:
failure criteria and accelerated characterization, in: Creep and Fatigue in Polymer Matrix
Composites, Elsevier, 2019.
Introduction 5