Scope Test Procedure Test method Operating Mode Application of the cycle and Measurement of the range AIS- 040 Rev 1 Electric Power Train Vehicle: Method of Measuring the Range
Specifies the method for the measurement of range expressed in km for L, M & N Categories of the electric power train vehicles Scope
It permits to measure the range expressed in km. Parameters, units and the accuracy of measurements Test Method PARAMETER UNIT ACCURACY RESOLUTION TIME s ± 0.1 s 0.1s DISTANCE m ± 0.1% 1m TEMPERATURE °C ± 1°C 1°C SPEED km/h ± 1% 0.2km/h MASS kg ± 0.5% 1kg Electrical Balance Ah ± 0.5% 0.3%
Operation Mode Initial Charge of REESS Application of cycle of IDC and measurement of range Distance is measured Initial charge of REESS With the normal overnight charge Charging time should not exceed 12 hours Application of cycle of IDC and measurement of range Discharge while driving is done at a steady speed of 70±5% from the max 30 min speed of the vehicle The discharge is stopped When vehicle is not able to run at 65% of the max 30 min speed After covering a distance of 100km REMARKS
At the end D distance is measured in km range of the electric vehicle. Application of the cycle and Measurement of the range