Autocad Training Noida

AutoCAD training Noida- AutoCAD is a computer software application which is used for design, NCA Institute of technologies the best Institute for provide auto cad training in Noida.

2. AutoCAD is a computer-aided drafting (CAD)
software package for 2D and 3D design and
drafting, developed and sold by Autodesk. It
currently runs exclusively on Microsoft operating
systems. Versions for Unix and Mac were released
(until R13), but these met with limited market
acceptance and were later dropped.
Architects and engineers (AEC), drafters,
cartographers, and other professionals involved
with design
We have AutoCAD2014 installed in our machines

3. Characteristics of AutoCAD
The use of AutoCAD software provides enhanced graphic
capabilities which allow the designers to:

 Conceptualization of Ideas using AutoCAD
 Easy modification of the engineering designs
 Perform design calculations quickly
 Use colures, fonts, textures, and other aesthetic features
 Know your product’s strength using simulations

4. 3d space: all objects are three dimensional in real life.
However, we cannot represent the third dimension on a 2d
surface, such as a piece of paper or your monitors. So we
use the Cartesian coordinate system on the 3d world of a
CAD tool (remember your analytical geometry courses).
All the points in your space is defined by its x, y and z
coordinates. In other words, AutoCAD uses points to
determine where an object is located.
x
z
y
(6,4,0)
(2,1,0)
x
y
(0,0,0)
(0,0,5)
(3,0,0)
(3,0,5)
(3,2,5)

7. ISOMETRIC
the angles between the projection of the x,
y, and z axes are all the same; 120°.

8. UCS and WCS
The AutoCAD world is 3 dimensional. However, if we want to
draw a 2d object, such as a plan or a section, we will use only
2 dimensions (x and y).
WCS (world coordinate system) is the imaginary plane that is
parallel to the ground. It is the default coordinate system.
Modifications made to the World Coordinate System (WCS)
result in a User Coordinate System (UCS). It is the plane that
you work on. It enables the user to draw 3 dimensional
objects.
To create a new UCS, type ucs on the command window, then
say New and specify 3 points on your new UCS plane.

9. Advantages of AutoCADAdvantages of AutoCAD
AutoCAD enhances the productivity and quality of
designs.
 Drawings get prepared in relatively shorter duration.
Reduced the manpower requirement .
 AutoCAD software is cost effective and highly
affordable.
 Designs can be drawn with greater accuracy.
6. Facilitates easy modification and revision of drawings.

10. CAREER OPTIONS
 Drafting Professional
 2D and3D Plan Developer
 CAD Engineer( Civil, Electrical and Mechanical)
 Architecture and Interior Designing