chap-4,5,besfinal.ppt@ best presentation for chap-4 & 5,PLC2025.ppt

best presentation for chap-4 & 5,PLC2025.ppt

1. PROGRAMMABLE
LOGIC
CONTROLLERS
IE450 - Manufacturing Systems

2. Outline
Review brief history of PLCs and manufacturing control
systems
Introduce the concepts of discrete control of
manufacturing
To define the basic components of a PLC
define the basic Architecture of a PLC
Review the various kinds of instrumentation used for
control.
Overview ladder logic programming

3. PROGRAMMABLE LOGIC CONTROLLER ( PLC)
•Invented in 1968 as a substitute for hardwired relay panels.
‘National Electrical Manufacturing Association (NEMA)’
•"A digitally operating electronic apparatus which uses a
programmable memory for the internal storage of instructions by
implementing specific functions; such as logic sequencing, timing,
counting, and arithmetic to control, through digital or analog
input/output modules, various types of machines or processes.
• The digital computer which is used to perform the functions of a
programmable controller is considered to be within this scope.
• Excluded are drum and other similar mechanical sequencing
controllers."

4. PURPOSE OF Programmable Logic Controllers (PLCs)
•Initially designed to replace relay logic boards
–Sequence device actuation
–Coordinate activities
•Accepts input from a series of switches
•Sends output to devices or relays

5. FUNCTIONS OF CONTROLLERS
•1) on-off control,
•2) sequential control,
•3) feedback control, and
•4) motion control.

6. CONTROL DEVICES
1) mechanical control - governor
2) pneumatic control - compressed air, valves, etc.
3) electromechanical control - switches, relays, a timer,
counters, etc,
4) electronics control - similar to electromechanical
control, except uses electronic switches.
5) computer control.

7. PLC Configuration

8. What devices does a PLC interact with?
•INPUT RELAYS-(contacts)These are connected to the outside world. They
physically exist and receive signals from switches, sensors, etc.
•INTERNAL UTILITY RELAYS -(contacts) These do not receive signals
from the outside world nor do they physically exist.
•COUNTERS-.They are simulated counters and they can be programmed to
count pulses. Typically these counters can count up, down or both up and
down.
•TIMERS-These also do not physically exist. They come in many varieties and
increments. The most common type is an on-delay type. Others include off-
delay and both retentive and non-retentive types. Increments vary from 1ms
through 1s.
•OUTPUT RELAYS-(coils)These are connected to the outside world.
DATA STORAGE-Typically there are registers assigned to simply store data.
They are usually used as temporary storage for math or data manipulation.

9. SWITCHES
Non-locking
Locking
Normally Open Normally Closed
Multiple Throw
P1
P2
Multiple Pole
Break-before-make
Make-before-break

10. TYPES OF SWITCHES
1. Basic switch, operated by a mechanical level,
2. Push-button switch,
3. Slide switch,
4. Thumbwheel switch,
5. Limit switch,
6. Proximity switch, and
7. Photoelectric switch.
RATING: voltage, current

11. RELAY
SA switch whose operation is activated by an electromagnet is called a "relay"
contact
coil
input
Relay coil Output contact

12. COUNTER
Digital counters output in the form of a relay contact when a pre
assigned count value is reached.
Register
Accumulator
contact
input
reset
output
Input
Reset
Output
Count 01 23 45 01

13. TIME
R
A timer consists of an internal clock, a count value register, and
an accumulator. It is used for or some timing purpose.
Clock
Accumulator
contact
reset
output
Register
Contact
Time 5 seconds.
Clock
Reset
Output
Count 1 2 3 40 5

14. PLC ARCHITECTURE
Programmable controllers replace most of the relay panel wiring
by software programming.

15. PLC COMPONENTS
1. ProcessorMicroprocessor based, may allow arithmetic
operations, logic operators, block memory moves,
computer interface, local area network, functions, etc.
2. Memory Measured in words.
ROM (Read Only Memory),
RAM (Random Access Memory),
PROM (Programmable Read Only Memory),
EEPROM (Electronically Erasable Programmable
ROM),
EPROM (Erasable Programmable Read Only Memory),
EAPROM (Electronically Alterable Programmable
Read Only Memory), and
Bubble Memory.

16. PLC COMPONENTS CONT.
3. I/O Modular plug-in periphery
AC voltage input and output,
DC voltage input and output,
Low level analog input,
High level analog input and output,
Special purpose modules, e.g.., high speed timers,
Stepping motor controllers, etc. PID, Motion
4. Power supply AC power
5. Peripheral Hand held programmer (loader),

 
cardiac resynchronization therapy (CRT) programmer,
Operator console,
Printer,
Simulator,
EPROM loader,
Cassette loader,
Graphics processor, and
Network communication interface. MAP, LAN

17. Advantages of PLC (Programmable Logic Controller):
•Automation and Precision:
–PLCs automate industrial processes, reducing the need for human intervention and
increasing process precision.
•Flexibility and Scalability:
–PLC systems are highly flexible. Programs can be modified or updated easily to adapt
to changing requirements or new equipment.
–They can be scaled for small, medium, or large applications, providing a solution for a
wide range of industries.
•Ease of Programming:
–PLC programming is relatively simple, especially when using graphical interfaces like
ladder logic, which is similar to electrical circuit diagrams.
•Real-Time Control:
–PLCs can monitor inputs and control outputs in real-time, ensuring timely reactions to
changes in the system.
•Durability and Reliability:
–PLCs are designed for use in harsh industrial environments, with the ability to
withstand high temperatures, humidity, and vibrations.
•Cost-Effectiveness:
–Over time, PLCs can reduce operational costs by improving efficiency and reducing
human error.

18. Disadvantages of PLC:
•Initial Cost:
–The upfront cost of a PLC system can be high, especially for complex
applications, including the cost of hardware, software, and training.
•Programming Complexity for Large Systems:
–While programming a basic PLC is relatively simple, large-scale systems with
numerous inputs and outputs can become complex, requiring more sophisticated
programming and potentially leading to increased maintenance difficulty.
•Limited Processing Power:
–PLCs may not be suitable for applications requiring very high processing power
or complex calculations, like advanced data processing or artificial intelligence
tasks.
•Limited User Interface:
–Although PLCs are highly efficient in controlling systems, they often have
limited user interfaces and may not be as intuitive or user-friendly as modern
computers or tablets.
•Size and Complexity of Setup:
–In large systems, PLCs can require extensive wiring and configurations, which
can be time-consuming and complicated to set up initially.

19. LADDER DIAGRAM
A ladder diagram (also called contact symbology) is a means of
graphically representing the logic required in a relay logic
system.
A
R1
PB1 PB2
R1
R1
start emergency stopRail
Rung
Rails- These are vertical lines and provide the sources of energy to
relays and logic system
Rungs- These are horizontal and contains the branches ,inputs and
outputs

20. Ladder Representation

21. PLC WIRING
DIAGRAM
0102 20
20
20 11
01
02
03
11
12
A
PLCInput Output
External
switches
Stored program

22. PLC INSTRUCTIONS
1) Relay,
2) Timer and counter,
3) Program control,
4) Arithmetic,
5) Data manipulation,
6) Data transfer, and
7) Others, such as sequencers.

23. LOGIC STATES
ON : TRUE, contact closure, energize, etc.
OFF: FALSE, contact open , de-energize, etc.
(In the notes we use the symbol "~" to represent negation.
AND and OR are logic operators. )
•Do not confuse the internal relay and program with the external
switch and relay.
•Internal symbols are used for programming.
•External devices provide actual interface.

24. Contacts:
a. Normally open -| |-
b. Normally closed -|/|-
c. Off-on transitional -||-
d. On-off transitional-| |-
Coil:
a. Energize Coil -( )-
b. De-energize -(/)-
c. Latch -(L)-
d. Unlatch -(U)-
RELAY
A Relay consists of two parts, the coil and the contact(s).

25. TIMERS AND COUNTERS
Timers:
a. Retentive on delay-(RTO)-
b. Retentive off delay-(RTF)-
c. Reset -(RST)-
Counter:
a. Counter up -(CTU)-
b. Counter down-(CTD)-
c. Counter reset-(CTR)-

26. PLC Programming- realization of AND, OR logic

27. AND and OR
LOGICPB1 R1PB2
R2
R1 = PB1.AND.PB2



R2 = PB2.AND.~PB4
PB3 PB4
PB1 R1
PB2
R1 = PB1 .OR. PB2
AND
OR

28. COMBINED AND &
OR
R1 = PB1 .OR. (PB2 .AND. PB3)
PB1 R1
PB2
pb3

29. Draw ladder diagram for the equations given below
•Q1 .Y=(X1+X2)X3
•Q2. Y=(X1X2)+X3
•Q3.. Y=(X1+X2)(X3+X4)
•Solution#1 Y=(X1+X2)X3

30. Q3. Y=(X1+X2)(X3+X4)
Q2. Y=(X1X2)+X3

31. Programming a PLC
•Oil is consumed
randomly.
•The tank needs to
be refilled by
turning on a pump.
•Two hydrostatic
switches are used to
detect a high and
low level.

32. Ladder Logic for Tank

33. Logic for Ladder Solution

34. EXAMPLE#3 Automatic bottle filing
Working Principle; Flow chart of working principle is shown in Fig.1. The PLC
ladder logic of this filling machine is shown in figure 2. If the button of the power
supply is pressed, the conveyor motor will start to move. When the infrared sensor
detects the bottle, the conveyor motor stops to move and the dc pump will start to
flow the water to fill the bottle. After completing the filling operation, the dc pump
stops. Hence the conveyor motor starts to move and the bottle goes away from the
dc pump. This process will be repeated if another bottle is sensed.

35. The PLC ladder logic of this filling machine

36. Exercise
Draw ladder diagram for the equations given below
Q1. Y=(X1+X2)+X3X4
Q2. Y=(X1+X2)(X3+X4)(X5X6)
Q3. Y=(X1X2)+X3