CIE color standards

Preetichaudhary55 1,353 views 35 slides Apr 15, 2019
Slide 1
Slide 1 of 35
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27
Slide 28
28
Slide 29
29
Slide 30
30
Slide 31
31
Slide 32
32
Slide 33
33
Slide 34
34
Slide 35
35

About This Presentation

CIE color standards:rods and cones,color matching functions(CMFs), luminous efficiency,grassman's laws, sensing light, CIE color space,CIE 1931 standards,CIE chromaticity diagram, gamut, metamer.


Slide Content

CIE Color Standards
presented by:
Preeti Choudhary
M.Sc. APPLIED PHYSICS
(17/MAP/016)
Department of Applied Physics
School of Vocational Studies and Applied Sciences
Gautam Buddha University

Trichromacy
“three colors”
•Color sensation in human retina is result of 3 different
photoreceptors

Rods and cones
http://en.wikipedia.org/wiki/Trichromatic_color_vision
• Young-Helmholtz theory (early 1800s): Color vision
is the result of three different photoreceptors
• Experimentally confirmed (1960s) by measuring
the cone response functions (absorption spectra)
• Three photoreceptors:
• S-cones
• M-cones
• L-cones
(It is better not to call
them red-, green-, and
blue-cones)
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Color matching experiment
Foundations of Vision, by Brian Wandell, Sinauer Assoc., 1995
In the human visual system, every color can be obtained
as the linear combination of three independent primary colors

Color matching
experiment 1
http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 1
p
1
p
2
p
3

The primary color
amounts needed
for a match
http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 1
p
1
p
2
p
3

The primary color
amounts needed
for a match
http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 1
p
1
p
2
p
3

The primary color
amounts needed
for a match
http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 2
http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 2
p
1
p
2
p
3

http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 2
p
1
p
2
p
3

http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Color matching
experiment 2
p
1
p
2
p
3
p
1 p
2 p
3
We say a
“negative”
amount of p
2

was needed to
make the match,
because we
added it to the
test color’s side.
The primary color
amounts needed
for a match:
p
1
p
2
p
3

http://groups.csail.mit.edu/graphics/classes/CompPhoto06/html/lecturenotes/Color.ppt

Metamer
Two colors are metamers if they have
•different spectral distributions
•same visual appearance
http://escience.anu.edu.au/lecture/cg/Color/Image/metamer.gif

Color matching functions
•Select 3 primary lights
•For each wavelength l, find the
amounts e
1
, e
2
, e
3
of the primaries
needed to match spectral signal t(l)
•These yield the
color matching
functions (CMFs)
for those primaries
•Store in 3x31 matrix
Note the negative dip
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847
CMFs

Luminous efficiency
•Another color matching experiment
–Whether one color is brighter or darker than another
•Goal
–Obtain a luminous efficiency function (LEF)
•Experimental environment
–photopic vision:
Daytime (high intensity levels), cones dominate
–scotopic vision:
Nighttime (low-light situation), rods dominate
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Grassman’s Laws
•Color matching is (approximately) linear
•Principle of superposition:
If
then
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Luminous efficiency (cont.)
Scotopic Photopic
•Photopic LEF (solid black)
•M-cone SSF (solid green)
•Combination of the cone SSFs
(green circles)
•1931 CIE XYZ space (dashed
magenta)Purkinje shift
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Luminous efficiency (cont.)
•The photopic LEF
a weighted combination of the cone SSFs
•M-cones dominate
»
The cone SSFs
weights
The photopic
LEF
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

•Output of a single photoreceptor:
Sensing light
SPD of the incident irradiance
(“spectral power distribution”)
SSF of the sensor
(“spectral sensitivity function”)
wavelength
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

•Discrete approximation:
Sensing light (cont.)
SPD of the incident irradiance
(“spectral power distribution”)
SSF of the sensor
(“spectral sensitivity function”)
(wavelength is used to index the elements of the vectors)
v = s
T
t
31×1 vector31×1 vector
Recall: 31 numbers capture the values in 10 nm bands from 400 – 700 nm (visible spectrum)
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Sensing three colors
•Three cone types:
• S-cones (“blue”)
• M-cones (“green”)
• L-cones (“red”)
Projection from a point in a
31D space to a 3D space
31×1 vector3×31 matrix
cone SSFs
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Color matching
•Grassman’s Laws:
Þ
Test light
Three primaries
(independent)
( )
“the colors match” = “the SPDs are metamers”
 Color matching is (approximately) linear!
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Color matching (cont.)
•The linear function for modeling
color matching
is the SPD of
the test light
The rows are the color matching
functions (CMFs) of the three primaries
Intensities of the
three primaries
Do not confuse the CMF C with the SSF S
v = St are the cone values; e = Ct are the primary intensities
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Color matching functions (CMFs)
CMFs using RGB
primaries
(solid lines)
Overlaid circles
obtained by a 3x3 linear
transform of cone SSFs
(close agreement)
Related exactly by a 3 x 3 transform
CMFs using
1931 CIE XYZ
primaries
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE color space
•The most important color space of all
•CIE XYZ tristimulus coordinate system
proposed in 1931
•Note that the CIE XYZ primaries are not
physically realizable
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE 1931 standards
•Commission internationale de l'éclairage (CIE)
•Used primaries:
–Red: 700 nm
–Green: 546.1 nm
–Blue: 435.8 nm
•Procedure:
–Show pure color to observer
–Match using primaries  weights for RGB
–Linear transform from RGB to XYZ
(XYZ are imaginary primaries; in XYZ, all weights are positive)
(using NTSC primaries)
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE Chromaticity diagram
Normalize:
x = X / (X+Y+Z)
y = Y / (X+Y+Z)
z = 1 – x – y
spectral locus
line of purples
gamut of
device is
convex hull
of primaries
Note: It is misleading to draw colors on the chromaticity diagram
(not recommended), but it makes the slide pretty
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE Chromaticity diagram
Natural encoding of
color for perception:
• hue
(dominant wavelength)
• saturation
(distance from white point)
• value
(height out of plane)
Notice similarity to color wheel
R
C
Y
G
M
B
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE Chromaticity diagram
With 3 fixed
primaries,
any color can be
matched
(allowing negative
weights)
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

CIE Chromaticity diagram
Complementary
colors are on
opposite sides
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Gamut
•Recall: gamut is the range of colors
that a device can display
•Monitor’s gamut is
triangle, because additive
colors (light) follow
Grassman’s laws
•More complicated
for printers, film
http://www.imaging-resource.com/PRINT/PPM200/PPM200vsP400.gif
http://www.cse.fau.edu/~maria/COURSES/COP4930-GS/ColorFigs/Mvc-061s.jpg
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

This leads us to an important question…

What are the primary colors?
•As children, we learn RYB
•Then we’re told RGB
•When asked about the discrepancy, we’re told
CMY is the same as RYB
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Something about this is unsettling
•Yellow still appears to be pure
–Even when you know that green and red make
yellow,
–It is impossible to believe
•In fact, red, yellow, blue, and green all
appear pure
•So do black and white
•Could there be six
primary colors?
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847

Opponent colors
http://en.wikipedia.org/wiki/Opponent_process
S. Birchfield, Clemson Univ., ECE 847, http://www.ces.clemson.edu/~stb/ece847