COMBUSTION AND FLAME PPT- SHORT NOTES/CLASS8/SCIENCE/CHEMISTRY

9,646 views 27 slides Jun 02, 2021
Slide 1
Slide 1 of 27
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26
Slide 27
27

About This Presentation

This is a PPT on the chapter- Combustion and Flame, of class 8.
The PowerPoint presentation will help you get an outline of the chapter, and also help create short notes (for revision)
I hope that would be something of your benefit. :)


Slide Content

COMBUSTION AND FLAME
CLASS 8, CHEMISTRY
PPT BY @RIDHIMAWAHI
NOTE-ALL THE ACTIVITIES ARE
GIVEN TOWARDS THE END OF THE
CHAPTER.

EXCLUDED CONTENTS-
•ALL THE ACTIVITIES IN NCERT
•BURNING OF FUELS LEADS TO HARMFUL
PRODUCTS
•IF ANY OTHER THING IS LEFT OUT, IT WILL BE
COVERED IN THE SECOND PART

WHAT IS COMBUSTION EXACTLY?
•Combustion in a chemical process in
which a substance reacts (burns) in the
presence of oxygenin order to give off
heat and light. Light is produced either in
form of flame or in form of glow.
•The substance which burns is often
referred to as a fuel or a combustible
substance. PPT BY @RIDHIMAWAHI

EXAMPLES OF COMBUSTION
•Magnesium + O2 àMgO( magnesium oxide) +
heat + light
•Carbon + O2 àcarbon dioxide + heat + light
FOOD-A FUEL FOR OUR BODIES
When food reacts with oxygen ( undergoes
respiration, a lot of energy is produced. Similarly,
when any other combustible substance undergoes
combustion, energy is released.
PPT BY @RIDHIMAWAHI

COMBUSTIBLE AND NON-
COMBUSTIBLE SUBSTANCES
COMBUSTIBLE
•They are the substances
which burn in the presence
of oxygen in order to give
off heat and light.
•In other words, these are
the substances that
undergo combustion.
•Ex-magnesium, wood, lpg,
coal, petroleum.
NON-COMBUSTIBLE
•While on the other hand,
these are the substances
that do not react ( burn)
with oxygen.
•As a result, they do not
undergo combustion.
•Examples-plastic, glass,
water
PPT BY @RIDHIMAWAHI

NECESSARY CONDITIONS FOR
COMBUSTION
•THERE ARE MAJORY 3 CONDITIONS FOR
COMBUSTION TO TAKE PLACE-
1.A COMBUSTIBLE SUBSTANCE ( A SUBSTANCE
WHICH UNDERGOES COMBUSTION)
2.OXYGEN i.e. A SUPPORTER OF COMBUSTION.
3.ATTAINMENT OF IGNITION TEMPERATURE.
Note-a fuel is a substance which undergoes
combustion i.e. It burns with air and releases a
lot of energy.PPT BY @RIDHIMAWAHI

WHAT IS IGNITION
TEMPERATURE?
•The ignition temperature is the minimum temperatureat which a substance starts to burn. If the ignition temperature of the substance is low, it means that it starts to burn at a low temperature in less time. This is because the minimum temperature for it to start to burn is less. If the ignition temperature of the substance is high, then it will start to burn on heating it on a high temperature and will relatively require more time.
•This is the reason why paper (and many other substances) does not catch fire on room temperature itself, because its ignition temperature is much higher than room temperature.
PPT BY @RIDHIMAWAHI

APPLICATION-USE YOUR
MIND!
QUES-A PERSON WHOSE CLOTHES CATCH FIRE
IS COVERED WITH A BLANKET. WHAT DO YOU
THINK COULD BE THE POSSIBLE REASON?
PPT BY @RIDHIMAWAHI

SOLUTION
•Well, we know that for fire to continue and
combustion to take place, oxygen is definitely
required. In fact, it is the supporter of
combustion.On spreading the blanket, the
supply of oxygen will be cut. And as a result,
the fire would extinguish.
QUES-WHY DOSEN’T A MATCHSTICK BURN AT
ROOM TEMPERATURE EVEN IN THE PRESENCE
OF OXYGEN?
PPT BY @RIDHIMAWAHI

SOLUTION
•Every combustible substance has an ignition temperature. The ignition temperature is the lowest temperature at which a substance starts to burn, and attainment of the ignition temperature is must before combustion/ catching fire. The ignition temperature of the matchstick is much higher than room temperature, and this is the reason why it catches fire on rubbing it against the surface of the matchbox because the heat produced by friction makes it attain its ignition temperature.
PPT BY @RIDHIMAWAHI

KEROSENE OIL IS USED TO
BURN WOOD AND COAL. WHY?
•For a substance to catch fire/ stat to burn, it
has to attain its ignition temperature. The
substances whose ignition temperature is very
high have to be heated up to a high
temperature in order to undergo combustion.
The substances such as wood and coal have
such a high ignition temperature, that a
matchstick can not provide enough heat (
make them attain the ignition temperature)
PPT BY @RIDHIMAWAHI

Continuation...
•Now, the ignition temperature of the
kerosene is low. So, if it is sprinkled over the
wood and burnt by a lighted matchstick, it is
going to catch fire easily in very less time due
to its low ignition temperature. The heat
produced by kerosene makes the wood to
burn, and the heat produced by wood is
enough for the coal to start burning as it is
sufficient to make it attain its ignition
temperature.
PPT BY @RIDHIMAWAHI

FLAMMABLE AND NON-FLAMMABLE
SUBSTANCES
FLAMMABLE SUBSTANCES
•These are the substances
whose ignition temperature
is very low and can catch
fire easily with a flame.
•Example-petrol, alcohol,
LPG
-----------------------------------------
NON-FLAMMABLE SUBSTANCES
•These are the substances
whose ignition temperature
is usually high and do not
catch fire or burn with a
flame.
•Example-coal, charcoal
-----------------------------------------
PPT BY @RIDHIMAWAHI

HOW CAN FIRE BE
CONTROLLED?
PPT BY @RIDHIMAWAHI

•The 3 very essential requirements for fire to
continue are-
1.Fuel, the substance that burns and
undergoes combustion
2.Presence of oxygen
3.Heat
If any of these components is removed, then
fire can be controlled.PPT BY @RIDHIMAWAHI

WE CONCLUDE THAT...
FIRE CAN BE CONTROLLED/ EXTINGUISHED BY
ANY OF THE FOLLOWING METHODS-
1. BY REMOVING THE FUEL i.e. THE
SUBSTANCE WHICH IS BURNING.
2. BY CUTTING OFF THE AIR SUPPLY, THIS
COULD BE DONE USING FIRE EXTINGUISHERS.
3. BY REMOVING THE HEAT.
PPT BY @RIDHIMAWAHI

FIRE EXTINGUISHERS
Fire extinguishers are the
Substances that are used to
Stop/extinguish fire.
Water is one the most
common
Fire extinguishers, but
That is only for substances like
Wood and paper.
PPT BY @RIDHIMAWAHI

•Water acts a fire extinguisher only for wood and
paper because it is able to extinguish fire by
cooling the substances. However, if any electric
equipment is on fire, then water may conduct
electricity and it may cause electric shocks.
•Also, if the fire involves petrol or oil, water is not
suitable for extinguishing the fire and this is
because water is heavier than oil and petrol, and
as a result the oil would start to float on the
surface of the water.
PPT BY @RIDHIMAWAHI

TYPES OF COMBUSTION
PPT BY @RIDHIMAWAHI

RAPID COMBUSTION
•It is the type of combustion which occurs in a
very short time, the substance burns rapidly
and a lot of heat and light is produced.
However, for this to happen the substance
needs to be heated first.
PPT BY @RIDHIMAWAHI

SPONTANEOUS
COMBUSTION
•It is the type of combustion in which the
substance starts to burn on its own without
the involvement of any external heat.
PPT BY @RIDHIMAWAHI

EXPLOSIONS
•This sudden type of combustion in which a lot
of sound, light and heat is produced. A lot of
gases are also produced.
PPT BY @RIDHIMAWAHI

FLAME
•It is a hot glowing body of ignited gas which is generated by something on fire.
•Whenever we burn something, vapours may be released which are in gaseous state. The substances which release the vapours on burning give flames. THESE VAPOURS START TO BURN DUE TO WHICH FLAME IS GIVEN OUT.
PPT BY @RIDHIMAWAHI

STRUCTURE OF THE FLAME
PPT BY @RIDHIMAWAHI

DETAIL-
•The innermost zone or the black zone is dark in
colour. This zone consists of the unburntvapours
of the combustible substance and is the least hot
part of the flame.
•The middle zone is yellow in colour. It is the
luminous zone which has moderate temperature.
( partial combustion of the fuel)
•Outermost zone-blue in colour which is the
hottest part of the flame and hear complete
combustion takes place.
PPT BY @RIDHIMAWAHI

Application-
Goldsmiths blow the outermost zone of a
flame with a metallic blow pipe for
melting gold and silver. ... The melting
point of gold and silver is very high.
therefore, goldsmiths need maximum
temperature. Hence goldsmith use
outermost part of the flame because it is
the hottest part of flame.
PPT BY @RIDHIMAWAHI

FUELS AND
CALORIFIC VALUE
PPT BY @RIDHIMAWAHI