Complaince of Teco Motor on Saudi Aramco SAMS

Complaince of Teco Motor on Saudi Aramco SAMS

1. Brief Understanding on Saudi Aramco Specs 1

2. Content: Inspection Method & Process Silent Features of 17-SAMSS-503 Silent Feature of Form 175-170200 Silent Features of 17-SAMSS-502 Silent Features of Form 175-170300 General Discussion on Pre-Inspection Meeting & ITP for Form wound motors. Understanding on Painting Scheme - SA 2

3. Inspection Method & Process Page : 1 ~3 3

4. 1. Inspection Process (Page : 1 of 3) 4 -Inspection Level of Electric Motor is defined in Saudi Aramco Engineering Procedure – 1151 -Inspection on Electric Motors

5. 1. Inspection Process (Page : 2 of 3) 5

6. 1. Inspection Process (Page : 3 of 3) 6 Sales Representative: Please collect Inspection Level Details during bidding stage.

7. Silent Features of 17-SAMSS-503 (Page : 1 of 12) 7

8. 2. Silent Features of 17-SAMSS-503 (Page : 1 of 12) 8

9. 2. Silent Features of 17-SAMSS-503 (Page : 2 of 12) 9 Testing & Inspecion Std. Manufacturing Std.

10. 2. Silent Features of 17-SAMSS-503 (Page : 3 of 12) 10

11. 2. Silent Features of 17-SAMSS-503 (Page : 4 of 12) 11 Abstract from IEEE 841:

12. 2. Silent Features of 17-SAMSS-503 (Page : 5 of 12) 12 Exceptions w.r.t. IEEE 841:

13. 2. Silent Features of 17-SAMSS-503 (Page : 6 of 12) 13

14. 2. Silent Features of 17-SAMSS-503 (Page : 7 of 12) 14

15. 2. Silent Features of 17-SAMSS-503 (Page : 8 of 12) 15 Key Notes from IEEE 841:

16. 2. Silent Features of 17-SAMSS-503 (Page : 9 of 12) 16 Key Notes from IEEE 841:

17. 2. Silent Features of 17-SAMSS-503 (Page : 10 of 12) 17

18. 2. Silent Features of 17-SAMSS-503 (Page : 11 of 12) 18

19. 2. Silent Features of 17-SAMSS-503 (Page : 12 of 12) 19

20. Silent Feature of Form 175-170200 Page : 1~4 20

21. 3. Silent Feature of Form 175-170200 (Page : 1 of 4) 21

22. 3. Silent Feature of Form 175-170200 (Page : 2 of 4) 22

23. 3. Silent Feature of Form 175-170200 (Page : 3 of 4) 23 (5) For motors greater than 250 HP only certificates/records to be checked is applicable. (6) For motors equal or less than 250 HP, only certificates/records to be provided is applicable.

24. 3. Silent Feature of Form 175-170200 (Page : 4 of 4) 24 ITP for LV Motor : Last Page

25. Silent Features of 17-SAMSS-502 Page : 1 ~18 25

26. 4. Silent Features of 17-SAMSS-502 (Page : 1 of 18) 26

27. 4. Silent Features of 17-SAMSS-502 (Page : 2 of 18) 27

28. 4. Silent Features of 17-SAMSS-502 (Page : 3 of 18) 28

29. 4. Silent Features of 17-SAMSS-502 (Page : 4 of 18) 29 Note: Supply Voltage for motors above 500HP is selected by EPC/Client side. However, if it is not declared or stated by EPC/Client, then defaulter will be taken as per API 541 S tand a r d su p ply V o l tage in AOC project.

30. 4. Silent Features of 17-SAMSS-502 (Page : 5 of 18) 30 Motor suitable for reduced voltage @ 80% Rated Voltage N o . of C o ld/H o t S t a r t; 3 / 2, e qua ll y distributed in an hour. If not specified by client/EPC, starting current (LRC) of motor shall be 650% (by Default).

31. Teco can choose to decide method of cooling as per design and its requirement. Similarly, Teco has liberty to choose nomenclature as per IEC as well as NEMA. Note: If EPC/Client didn’t specify cooling method in motor proposal, then selection will be made as per requirement. As default condition, Teco choose for TEAAC enclosure. 4. Silent Features of 17-SAMSS-502 (Page : 6 of 18) 31

32. 4. Silent Features of 17-SAMSS-502 (Page : 7 of 18) 32 Teco choose frame material meeting API 541 Clause 2.4.2 Frame can be -Steel Fabricated -Cast Iron If Client/EPC has not specified any specific construction method, then Teco will choose, what best for design – keeping natural frequency of frame minimal.

33. 4. Silent Features of 17-SAMSS-502 (Page : 8 of 18) 33

34. 4. Silent Features of 17-SAMSS-502 (Page : 9 of 18) 34 In case of Vertical motors, antifriction bearing can be used, with conditions to be met as per API 541 Clause no. 2.4.7.1.5. Bearing should comply with ABMA. All bearings need to be electrically insulated. Bearing shell need to grounded used earthing straps.

35. 4. Silent Features of 17-SAMSS-502 (Page : 10 of 18) 35 Note: Conditions can be overruled, if there is any specific request from EPC/Client.

36. 4. Silent Features of 17-SAMSS-502 (Page : 11 of 18) 36

37. 4. Silent Features of 17-SAMSS-502 (Page : 12 of 18) 37

38. 4. Silent Features of 17-SAMSS-502 (Page : 13 of 18) 38

39. 4. Silent Features of 17-SAMSS-502 (Page : 14 of 18) 39 Non Contact

40. 4. Silent Features of 17-SAMSS-502 (Page : 15 of 18) 40

41. 4. Silent Features of 17-SAMSS-502 (Page : 16 of 18) 41

42. 4. Silent Features of 17-SAMSS-502 (Page : 17 of 18) 42 Discussion of these testing under PIM and ITP section.

43. 4. Silent Features of 17-SAMSS-502 (Page : 18 of 18) Client/EPC request usually comes with motor proposal sheet. This will help us to understand their additional features required along with motor. 43

44. Silent Features of Form 175-170300 Page : 1~3 44

45. 5. Silent Features of Form 175-170300 (Page : 1 of 3) 45

46. 5. Silent Features of Form 175-170300 (Page : 2 of 3) 46

47. 5. Silent Features of Form 175-170300 (Page : 3 of 3) 47

48. General Discussion on Pre-Inspection Meeting & ITP for wound motors. Page: 1~2 48

49. 6. General Discussion on Pre-Inspection Meeting & ITP for wound motors. Page: 1 of 2 49 PIM : Pre-Inspection Meeting Conclusion on Inspection & Test Procedure for Form Wound motors (500HP & Above)

50. 6. General Discussion on Pre-Inspection Meeting & ITP for wound motors. Page : 2 of 2 50

51. Understanding on Painting Scheme - SA Page : 1 ~ 3 51

52. 7. Understanding on Painting Scheme – SA (Page: 1 of 3) 52

53. 7. Understanding on Painting Scheme – SA (Page: 1 of 3) 53

54. 7. Understanding on Painting Scheme – SA (Page: 1 of 3) 54

55. 7. Understanding on Painting Scheme – SA (Page: 1 of 3) 55

56. 7. Understanding on Painting Scheme – SA (Page: 1 of 3) 56

57. Thank you !!!! 57