CS8081 CSE CsBs ESIoT FDP PRESeNTATION1.pptx

samrajsms 19 views 6 slides May 14, 2024
Slide 1
Slide 1 of 6
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6

About This Presentation

Intro about embedded system and iot course


Slide Content

Dr.Lordwin 1 தொகச்சொல்லித் தூவாத நீக்கி நகச்சொல்லி நன்றி பயப்பதாந் தூது. குறள் - 685 பலவற்றைத் தொகுத்து சொல்லியும், அவற்றுள் பயனற்றவைகளை நீக்கியும், மகிழுமாறு சொல்லியும் தன் தலைவனுக்கு நன்மை உண்டாக்குகின்றவன் தூதன்

Internet of Things ( IoT ) comprises things that have unique identities and are connected to the Internet The focus on IoT is in the configuration, control and networking via the Internet of devices or “Things” that are traditionally not associated with the internet Eg : pump, utility meter, car engine Introduction 14-05-2024 Dr.Lordwin Cecil Prabhaker 2

Internet appears everywhere in the world It is primarily connection between people Idea: Move from Internet of People  Internet of Things Internet of Things is a plan to connect things also using the same medium

Course Introduction

Instructions that affect Flag bits Dr.Lordwin Instruction Flags Affected C OV AC ADD √ √ √ ADDC √ √ √ SUBB √ √ √ MUL √ DIV √ DA √ RRC √ RLC √ SETB C 1 CLR C CPL C √ ANL C,bit √ ANL C,/bit √ ORL C,bit √ ORL C,/bit √ MOV C,bit √ CJNE √

Procedure to Calculate the Delay Program SET the TMOD register For example, if we want to operate timer1 in mode1 it must be configured as “TMOD=0x10”. CALCULATE TH1 & TL1 E xample: 500us time delay 500us/1.080806us 461pulses P=65535-461 P=65074 65074 converted by hexadecimal =FE32 TH1=0xFE; TL1=0x32; Start the timer1 “TR1=1;” Monitor the flag bit “while(TF1==1)” Clear the flag bit “TF1=0” Cleat the timer “TR1=0”