Design for disable – toilet details

STANDARD OF TOILET FOR HANDICAPED PEOPLE OR FOR DESABLE PERSON

1. DESIGN FOR DISABLE – TOILET DETAILS MUKUND SUTHAR & SAKSHAM GOYAL 9/19/2016 1 DESIGN FOR DISABLE - TOILET DETAILS

2. AIM AS AN ARCHITECTOUR RESPONSIBILITY IS TO INTEGRATE DISABLE PEOPLE INTO THE SOCIETY IN ORDER FOR THEM TO TAKES AN ACTIVE PART IN SOCIETY AND LEAD A NORMAL LIFE. TO BE ACTIVE, A DISABLE PERSON SHOULD ABLE TO COMMUTT BETWEEN HOME, WORK AND OTHER DESTINATIONS THE TECHNICAL AIM OF THE PRESENTATON IS TO PROVIDE A BARRIER-FREE ENVIRONMENT FOR THE INDEPENDENCE, CONVENIENCE AND SAFETY OF ALL PEOPLE WITH DISABILITY. IN THE PHYSICAL TERMS, THE PROVISIONAL OF A BARRIAER-FREE ENVIROMENT CAN BE THE UNDERSTAND IN FOUR COMPLEMENTARY DOMAIN :- INSIDE BUILDING IN THE IMMEDIATE VICINITY OF BUILDINGS ON THE LOCAL ROAD AND PATHS IN OPEN AREA AND RECREATIONAL AREAS. 9/19/2016 2 DESIGN FOR DISABLE - TOILET DETAILS

3. SIGNAGES 9/19/2016 3 DESIGN FOR DISABLE - TOILET DETAILS

4. SPACE REQUIREMENT 9/19/2016 4 DESIGN FOR DISABLE - TOILET DETAILS

5. TOILET LAYOUT SOME POINTS TO REMEMBER :- THE MIN. SIZE SHALL BE 1500 X 1750 mm. TURNING CIRCLE OF 1500mm DIA ARE RECOMMENDED INSIDE THE WASHROON TO ALLOW FOR FULL TURN MOVEMENT OF A WHEELCHAIR. THE PARALLEL APPOACH, WHICH IS THE EASIEST. THE DIAGONAL APPROACH. WHICH IS DIFFCULT 9/19/2016 5 DESIGN FOR DISABLE - TOILET DETAILS

6. 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 6 TOILET FLOOR SHALL HAVE A NON-SLI SURFACE WITHOUT ANY LVL. DIFFERECE. GUIDING BLOCK NEAR THE ENTRY SHOULD BE HAVE A TEXTURAL DIFFERENCE, (E.G. DIAMON TILES, PRIMA REGINA TILES, UNDRESSED GRANITE). LIGHT WEIGHT PVC DOOR SHUTTER SHOULD BE PROVIDED AS A SLIDING DOOR. PROVISIONAL OF VERTICAL & HORZONTAL RAIL AS 40mm C.P. STEEL PIPE.

7. TOILET LAYOUT - 1 9/19/2016 7 DESIGN FOR DISABLE - TOILET DETAILS

8. TOILET DETAIL – DOOR 9/19/2016 8 DESIGN FOR DISABLE - TOILET DETAILS

9. TOILET DETAIL – HAND RAIL 9/19/2016 9 DESIGN FOR DISABLE - TOILET DETAILS

10. TOILET DETAIL–WATERCLOSET(WC) 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 10 FLUSH VALVE IS ON WIDE SIDE OF THE ACCESSIBLR WATER CLOSET GRAB BARS REQUIRED

11. TOILET DETAIL–WATERCLOSET(WC) 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 11 HEIGHT OF ACCESSIBLE WATER CLOSET SHALL BE 430 – 485 mm MEASURED TO THE TOP OF THE TOILET SEAT.

12. TOILET DETAILS – SPACE & REACH 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 12 SPACE ALLOWANCE & REACH RANGES MIN CLEAR WIDTH FOR WHEELCHAIR PASSAGE – 800 – 1000 mm.

13. TOILET DETAILS–LAVATORIES&MIRRORS 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 13 Lavatories shall be mounted with the rim or counter surface no higher than 850mm above the finished floor Provide a clearance of at least 725mm above the finished floor to the bottom of the apron. Clear floor space- 750mm X1200mm shall be provided in front of lavatory.

14. 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 14 TOILET DETAILS–LAVATORIES&MIRRORS

15. 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 15 Hot water and drain pipes under lavatories shall be insulated or otherwise configured to protect against contact. TOILET DETAILS–LAVATORIES&MIRRORS

16. TOILET LAYOUT - 2 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 16 ACCESSIBLE TOILET AND SHOWER COMPARTMENT

17. 9/19/2016 DESIGN FOR DISABLE - TOILET DETAILS 17 TOILET LAYOUT - 2 ACCESSIBLE TOILET AND SHOWER COMPARTMENT