Fdfg2 u (asdfgmbly) (1)

dfgdf

1. DETAIL A
DETAIL B
DETAIL C
DETAIL D
DESCRIPTION
DRAWING USAGE CHECKED BY
ENG. APPROVAL DRAWN BY
DWG. NO.
CPD NO.
KC8
1 OF 2
CEK 2/19/2013
8/8/2012
FF12-U
12'-6" UNIVERSAL FOLDING FRAME
WITH (1) STIFF ARM
4647
CUSTOMER
FF12-U
CLASS SUB
PART NO.
81 01
PAGE
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:
SAWED, SHEARED AND GAS CUT EDGES
(± 0.030")
DRILLED AND GAS CUT HOLES
(± 0.030")
- NO CONING OF HOLES
LASER CUT EDGES AND HOLES
(± 0.010")
- NO CONING OF HOLES
BENDS ARE ± 1/2 DEGREE
ALL OTHER MACHINING
(± 0.030")
ALL OTHER ASSEMBLY
(± 0.060")
TOLERANCE NOTES
PROPRIETARY NOTE:
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
Engineering
Support Team:
1-888-753-7446
valmont
Locations:
New York, NY
Atlanta, GA
Los Angeles, CA
Plymouth, IN
Salem, OR
Dallas, TX
NET WT.
UNIT WT.
LENGTH
PART DESCRIPTION
PART NO.
QTY
ITEM
224.75 224.75 FOLD A FRAME 12', 3' STANDOFF X-FF123 1 1
13.90 13.90 UPPER GATE FOOT WELDMENT CFM 1 212.72 12.72 LOWER GATE FOOT WELDMENT CFS 1 3
9.06 4.53 GATE BACKING BAR GBB 2 40.70 0.35 1/2" x 10" THREADED ROD (HDG.) G12R-10 2 52.81 0.35 1/2" x 12" THREADED ROD (HDG.) G12R-12 8 62.81 0.35 1/2" x 15" THREADED ROD (HDG.) G12R-15 8 63.51 0.07 1/2'' HDG HEAVY 2H HEX NUT G12NUT 49 70.68 0.01 1/2" HDG LOCKWASHER G12LW 49 81.67 0.03 1/2" HDG USS FLATWASHER G12FW 49 90.69 0.34 5 in. 1/2'' x 5" A325 HDG BOLT A1205 2 103.71 3.71 CROSSOVER PLATE 2-3/8" X 2-3/8" SCX1 1 111.39 1.39 2.5 in STIFF ARM ANGLE BRACKET X-STA3 1 122.74 1.37 STIFF ARM CHANNEL BRACKET X-STU 2 130.18 0.18 2 in 1/2'' x 2" HDG HEX BOLT GR5 G1202 1 140.43 0.22 3 in 1/2" x 3" HDG HEX BOLT GR5 FULL THREAD G1203 2 150.65 0.65 4-1/16" CLAMP HALF, 1/4" THK. ACP 1 160.77 0.77 STIFF ARM MOUNT CLAMP SAM 1 170.25 0.25 1.5 in 5/8'' x 1-1/2" HDG BOLT G58112 1 180.03 0.03 5/8" HDG LOCKWASHER G58LW 1 190.13 0.13 5/8'' HDG HEAVY 2H HEX NUT G58NUT 1 207.50 0.63 1/2" X 2-1/2" X 4-1/2" X 2" U-BOLT (HDG.) X-UB1212 12 21
48.06 48.06 150 in 2-3/8" OD X 150" SCH 40 GALVANIZED PIPE P2150 1 22
A
B
C
D
TOTAL WT. # 346.18
SEE SHT 2 FOR DETAILS
SEE SHEET 3 1
2
4
10
7 8 9
3
4
6 7 8 9
22
21
9 8 7
X2
X2
X2
17
1615
7
8
9
18
19
20
13
5 7 8 9
12
ROUND LEGS FROM 1" TO 8"
60° ANGLE LEGS FROM 1-1/2" TO 8"
90° ANGLE LEGS FROM 1-1/2" TO 6"
22
1
1
22
6 7 8 9
X2
X2
X2
X2
X2
X2
10
7
8
9
14
7
8
9
X2
X2
X2
CONFIGURED TO ACCEPT 2, 3 OR 4 ANTENNA PIPES
(ORDER MOUNTING PIPES SEPARATELY)

11

2. DESCRIPTION
DRAWING USAGE CHECKED BY
ENG. APPROVAL DRAWN BY
DWG. NO.
CPD NO.
KC8
2 OF 2
CEK 2/19/2013
8/8/2012
FF12-U
12'-6" UNIVERSAL FOLDING FRAME
WITH (1) STIFF ARM
4647
CUSTOMER
FF12-U
CLASS SUB
PART NO.
81 01
PAGE
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE:
SAWED, SHEARED AND GAS CUT EDGES
(± 0.030")
DRILLED AND GAS CUT HOLES
(± 0.030")
- NO CONING OF HOLES
LASER CUT EDGES AND HOLES
(± 0.010")
- NO CONING OF HOLES
BENDS ARE ± 1/2 DEGREE
ALL OTHER MACHINING
(± 0.030")
ALL OTHER ASSEMBLY
(± 0.060")
TOLERANCE NOTES
PROPRIETARY NOTE:
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
Engineering
Support Team:
1-888-753-7446
valmont
Locations:
New York, NY
Atlanta, GA
Los Angeles, CA
Plymouth, IN
Salem, OR
Dallas, TX
150"
(REF)
149 1/4"
(REF)
41"
(REF)
42 9/16"
(REF)
39 1/2"
(REF)