Floppy micro conector

SergioBetancur4 1,911 views 2 slides Dec 13, 2014
Slide 1
Slide 1 of 2
Slide 1
1
Slide 2
2

About This Presentation

Conexiones para la conversion de microconector a un conector normal de una unidad de diskette (Floppy) de 1.44 MB


Slide Content

3.5 inch micro Floppy Disk Drive micro connector (26x1 pin) pinout
http://pinoutsguide.com/Storage/26pin_microfloppy_pinout.shtml

Be careful! The conductor side at the flexfoil connector can vary.

Pin
Pin
Name
Description
1 VCC VCC +5V
2 /INDEX Index
3 VCC VCC +5V
4 /DRVS Drive Sel
5 VCC VCC +5V
6 /DSKCHG Disk Change
7 RES Reserved
8 READY
used only in older drives.
In newer drives N/C.
9 MEDIA
used only in older drives.
In newer drives N/C.
10 /MOTE Motor Enable
11 /REDWC Density Select
12 /DIR Direction
13 RES Reserved (Inuse)
14 /STEP Step
15 GND Ground
16 /WDATE Write Data
17 GND Ground
18 /WGATE Write Gate
19 GND Ground
20 /TRK00 Track00
21 GND Ground
22 /WPT Write Protect
23 GND Ground
24 /RDATA Read Data
25 GND Ground
26 /SIDE1 Side 1 Select

Floppy Disk Drive Pinout
file:///C:/Users/Administrador/Documents/Floppy-Pinout.htm

Floppy Drive A Pin Out
Pin No. Signal Name Description
1 Ground --
2 /REDWC Density Select 1=Low/0=High
3 Ground --
4 N/C Reserved
5 Ground --
6 N/C Reserved
7 Ground --
8 /Index 0=Index
9 Ground --
10 /MOTEA 0=Motor Enable Drive 0
11 Ground --
12 /DRVSB Drive Select 1
13 Ground --
14 /DRVSB Drive Select 0
15 Ground --
16 /MOTEB 0=Motor Enable Drive 1
17 Ground --
18 /DIR 0=Direction Select
19 Ground --
20 /Step 0=Head Step
21 Ground --
22 /WDATE Write Data
23 Ground --
24 /WGATE Floppy Write Enable, 0=Write Gate
25 Ground --
26 /TRK00 0=Track 00
27 Ground --
28 /WPT 0=Write Protect
29 Ground --
30 /RDATA Read Data
31 Ground --
32 /SIDE1 0=Head Select
33 Ground --
34 /DSKCHG 1=Disk Change/0=Ready