Allen-Bradley, ControlFLASH, Data Highway Plus, Data-Set, DataLiner, DH+, DTAM Micro, INTERCHANGE, MicroLogix, PanelView, PLC-5, Rockwell Automation, Rockwell Software, RSLinx, RSLogix, RSLogix
500, SLC, SLC 5/03, SLC 500, and TechConnect are trademarks of Rockwell Automation, Inc.
CIP and EtherNet/IP are trademarks of ODVA, Inc.
OPC (OLE for Process Control) is a registered trademark of the OPC Foundation.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Äì
The maximum extension of the latch is 14 mm (0.55 in.) in the open position.
A flat-blade screwdriver is required for removal of the controller. The
controller can be mounted to EN50022-35x7.5 or EN50022-35x15 DIN rails.
DIN rail mounting dimensions are shown below.
·
·
·
·
The controller does not provide loop power for analog inputs. Use a power
supply that matches the transmitter specifications as shown.
The analog output can support a voltage function as shown in the following
illustration.
IMPORTANT
Äì
Äì
Äì
IMPORTANT
IMPORTANT
DUO0000 RU
ID Status
Honitoring
Hode Switch
MicroLogix 1400 Series A controllers display an
"Unprotected!" message but you will not be able to edit
the corresponding data file.
To exit the Protocol Setup Menu, press the ESC key on the
LCD keypad at any time.