Obstacle Avoidance ROBOT using ARDUINO

This is a presentation of OBSTACLE AVOIDANCE ROBOT. which has the details on making an obstacle avoider using arduino uno, ultrasonic sensor. This presentation has the detailed description of all the components that are being used in making. And also circuit diagram and flow chart of the robot.

1. obstacle avoidance Using Ultrasonic sensor By Jovin Richard iCHards company

2. What is a obstacle avoidance robot? Obstacle avoidance is a means of a robot being able to move around in an unknown environment without colliding with surrounding objects

3. What is a sensor? A sensor is a device that detects and responds to some type of input from the physical environment . The specific input could be light, heat, motion, moisture, pressure. The output is generally a signal that is converted to human-readable form.

4. Introduction to Ultrasonic Sensor What is a ultrasonic? ULTRA - BEYOND SONIC – SOUND The sound beyond human hearing range (  20,000  Hz ) is known as ultrasonic. Ultrasonic sensor? Ultrasonic sensors   are sensors  that convert  ultrasound  waves to  electrical signals  or vice versa .  

5. How does an ultrasonic sensor works? How does a bat sense distance Bats sense distance using sound . They emit sound waves and receive back reflected waves . The time it takes to receive the waves back provides them with a very good estimate of the distance. This is exactly how ultrasonic sensors estimate distance.

6. calls made by mouth ears hear reflected waves brain decides what to do wing muscles move flight path changed, as

7. An ultrasonic sensor has two parts: A transmitter that sends out a signal that humans cannot hear A receiver that receives the signal after it has bounced off nearby objects The sensor sends out its signal and determines how long the signal takes to come back .

8. If the object is very close to the sensor, the signal comes back quickly If the object is far away from the sensor, the signal takes longer to come back If objects are too far away from the sensor, the signal takes so long to come back (or is very weak when it comes back) that the receiver cannot detect it

9. Ultrasonic S ensor connections Red - Power Yellow - Signal Black - Ground  

10. SERVO MOTOR What is a servo motor? A   servomotor  is a rotary actuator or linear actuator that allows for precise control of angular or linear position, velocity and acceleration . It consists of a suitable  motor coupled to a sensor for position feedback.

11. Servo Motor Connection Servo motors have three wires : Red Black Yellow or Orange

12. Red wire - power wire (connected to the 5V pin on the Arduino board) Black wire – Ground (connected to a ground pin on the Arduino board) Yellow wire – signal pin (connected to a digital pin on the Arduino board)

13. Algorithm for obstacle avoidance robot

14. Connections

15. Applications Obstacle sensing robot can be applied at toys where small children will play It can be used for army applications It can be used in mines

16. Obstacle avoidance robot

17. THANK YOU JOVIN RICHARD Ichardscompany.com