Opticline-C-technical-data-2023Thailand-Supitcha 081-8515451.pdf

เอกสารฉบับนี้สรุปข้อมูลทางเทคนิคของเครื่องวัด Opticline C Series
ซึ่งเป็นระบบวัดชิ้นงานแบบไม่สัมผัส (Non-contact Measuring System) จาก Jenoptik Germany
ออกแบบมาสำหรับการวัดชิ้นงานทรงกระบอก เช่น เพลา, ลูกปืน, น๊อต, สกรู, ปลอกเพลา, และชิ้นส่วนความแม่นยำสูง
ให้ผลการวัดที่รวดเร็วและแม่นยำ เหมาะสำหรับสายการผลิตที่ต้องการ ตรวจสอบ 100% inspection

รายละเอียดเด่นในเอกสาร:

สเปกทางเทคนิคของแต่ละรุ่นในตระกูล Opticline C (C305, C415, C614, C918)

ความละเอียดของการวัด, ระยะวัดสูงสุด, และค่าความแม่นยำ (Accuracy)

ตัวอย่างการประยุกต์ใช้งานในอุตสาหกรรมยานยนต์และเครื่องจักรกล

เทคโนโลยีแสงเชิงเส้นและระบบกล้องออปติคอลความละเอียดสูง

ฟังก์ชันซอฟต์แวร์สำหรับวัดชิ้นงานอัตโนมัติและรายงานผล QC

📞 ติดต่อข้อมูลเพิ่มเติมในประเทศไทย:
คุณสุพิชชา – Precision Tooling Service Co., Ltd. (PTSC)
โทร. 081-851-5451

1. Opticline Unit C203 C305 C308 C314 C605 C608 C614 C623 C908 C914 C923 C1214 C1223
Measuring capacity
Max. diameter
Length

2
[mm] [mm]
30
250
50
300
80
300
140 300
50
600
80
600
140 600
230 550
80
900
140 900
230 850
140
1200
230
1150
Workpiece capacity Diameter Length

2
[mm] [mm]
150 250
150 300
150 600
240 550
150 900
240 850
150
1200
240
1150
Resolution Diameter, length Rotation
[µm]
[°]
0.1
0.0006
Accuracy
/ MPE
3

Diameter [µm] 1.0 + D [mm] / 200
Length [µm] 2.6 + L [mm] / 200 3.6 + L [mm] / 100 2.6 + L [mm] / 200 3.6 + L [mm] / 100 2.6 + L [mm] / 200 3.6 + L [mm] / 100
Repeatability
4

Diameter Length
[µm] [µm]
0.3 1.2
Speed Measuring Measuring rotation Positioning Positioning rotation Measuring cycle
[mm/s]
[U/s]
[mm/s]
[U/s]
[s]
Automatically optimized between 10
- 80
1 .. 3
200
1
Depending on the type of test char
acteristics - usually 3
… 30 s
Dimensions Measuring system Measuring system with T3D
700 x 840 x 1055 810 x 840 x 1055
700
x 840 x 1355
810 x 840 x 1355
900 x 1065 x 1365
990 x 1065 x 1365
700 x 840 x 1655 810 x 840 x 1655
900 x 1065 x 1665 990 x 1065 x 1665
880 x 840 x 2070 905 x 840 x 2070
1095
x 1065 x 2070
Weight Measuring system

5
[kg] 250 - 290 300 - 340 300 - 400 320 - 360 520 - 580 500 - 540 770 - 830
Power supply Connection Voltage Power frequency Max. consumption Fuse
[V]
[Hz]
[kVA]
[A]
AC-PH, N, PE
200 - 240 / 100 - 120 (127 on request)
50
/ 60
1,5
16
Technical Data Opticline C
- Series
www.hommel-etamic.com
C
ontact : K.Supitcha 081-851 -5451
Email : [email protected]

2. Opticline Unit C203 C305 C308 C314 C605 C608 C614 C623 C908 C914 C923 C1214 C1223
Optional tactile probing system TSP  
3 6 7
MPEE1 axial run-out
MPEE1 length 
8
Repeatability 4s length 
9
[µm]
[µm]
[µm]
-
1.5
3.6 + L [mm] / 200
1.5
-
1.5
3.6 + L [mm] / 200
1.5
-
1.5
3.6 + L [mm] / 200
1.5
-
Max. length 
10
[mm] 280 280 250 580 580 550 880 850 1150
Optional tactile probing system T3D 
3 6 7
Accuracy/MPE diameter
Accuracy/MPE length
[µm]
[µm]
-
3.7 + D [mm] / 200
3.6 + L [mm] / 200
-
3.7 + D [mm] / 200
3.6 + L [mm] / 200
3.7 + D [mm] /  100
4.6 + L [mm] /  100
3.7 + D [mm] / 200
3.6 + L [mm] / 200
3.7 + D [mm]  / 100
4.6 + L [mm] / 100
3.7 + D [mm]  / 200
3.6 + L [mm]  / 200
3.7 + D [mm] / 100
4.6 + L [mm]  / 100
Repeatability 4s diameter 
4
[µm] 1.5 1.5
Repeatability 4s length 
4
[µm] 1.5 1.5
Max. achievable length 
10
[mm] 250 550 440 850 740 1150 1040
Max. achievable diameter 
10
[mm] 80 140 80 140 220 (230
11
) 80 140 220 (230 
11
) 140 220 (230 
11
)
Optional Workpiece Temperature Unit TU
Temperature range
Temperature probing force
[°C]
[N]
- -10...55
4
Standard Headstock
Morse taper headstock MT2 - MT2 -
Workpiece weight 
12
[N] 100 200 200
Optional Headstock HpSS
Morse taper headstock
Workpiece weight 
12
[N]
- MT2
300 (600) 
13
-
Optional Headstock HpSS+
Morse taper headstock
Workpiece weight 
12
Reduced Capacity in Length 
14
[N]
[mm]
- MT3
600 (750) 
13
-30
- MT3
600 (750) 
13
-30

3. Opticline Unit C203 C305 C308 C314 C605 C608 C614 C623 C908 C914 C923 C1214 C1223
Standard Tailstock
Morse taper tailstock
Positioning
Clamping stroke
Manual quick clamping lever
Clamping force
[mm]
[N]
MT2
manual
20, manual
yes, with holding function
16...25
-
MT2
manual
20, manual
yes, with holding function
16...25
-
MT2
manual
20, manual
yes, with holding function
16...25
-
Optional Pneumatic Tailstock aPTS
Morse taper tailstock
Positioning
Clamping stroke
Manual quick clamping lever
Clamping force
[mm]
[mm]
[N]
-
MT2
manual
20 or 35, automated (manual 
15
)
yes
16…25
-
MT2
manual
20 or 35, automated (manual 
15
)
yes
16...25
-
MT2
manual
20 or 35, automated (manual 
15
)
yes
16...25
-
Optional Motorized Tailstock aMTS
Morse taper tailstock
Positioning
Clamping stroke
Manual quick clamping lever
Clamping force
[mm]
[mm]
[N]
-
MT2
automated
20, automated or manual
yes
16...25
Optional Motorized Tailstock aMTS+
Morse taper tailstock
Positioning
Clamping stroke
Manual quick clamping lever
Clamping force
[mm]
[mm]
[N]
-
MT2
automated
automated over entire positioning length
no
10 .. 80 (40 default), adjustable via software Tolaris Optic
Footnotes
1 Environmental conditions: not chemically aggressive, not explosive, not radioactive. Temperature range from +10° C to +40° C, max. relative humidity 85 % without condensation.
Dust aerosol values: according to TRGS 900 (Industrial safety regulations and technical rules for workplace environment and hazardous substances).
2 Intermediate tips from the standard scope of supply. Length may be reduced depending on the clamping equipment applied.
3 Maximum permissible error following EN ISO 10360-7 / VDI/VDE 2617, relating to DAkkS reference standard. Specifications plus uncertainty of calibration masters Ucal D: 0.3 μm and L: 0.4 μm.
Environmental conditions in accordance with VDI/VDE 2617, 18 – 22° C, class 3 (gradient 1 K/h, 2 K/24h, 0.5 k/m). Mechanical ambient conditions in accordance with VDI 2038-2 limit curve VC-C.
4 Typical range over 25 repeat measurements on ground part surfaces. In accordance with VIM, International Dictionary of Metrology.
5 Weight depends on configuration in terms of variants and options.
6 Verification with and relating to standard(s) from Jenoptik.
7 Probing systems in conjunction with optional high-precision headstock HpSS or HpSS+ (axial and radial run-out accuracy 1 μm).
8 Distance between end faces.
9 Typical range over 10 repeat measurements on ground part surfaces. In accordance with VIM, International Dictionary of Metrology
10 Limitation of the measuring capacity possible when using a tactile probe system (depending on the clamping devices, the probe arm geometry and the probe element used).
Information valid for standard scope of delivery. Further limitations of the measuring capacity and MPE possible when using alternative solutions for clamping devices or probe arms.
11 For one sided tactile T3D measurements in direction Y+ only.
12 Max. mass moment of inertia: 0.04 kg*m². Improper workpiece positioning may lead to damage.
13 Value in brackets only when workpiece positioning without knocks or strong forces.
14 Reduced measuring and workpiece capacity compared to headstock versions MT2 in between standard centers.
15 Manual clamping only with deactivated pneumatic unit without air pressure supply.
Technical Data Opticline C - Series en 2025-03-14 Copyright © JENOPTIK Optical Systemsx GmbH. All rights reserved. Pictures may show options and are not legally binding. Subject to change without notice.