Personal Protective Equipment Training Slides

PPE training slides

1. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)

2. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
IOGP Recommended Practices 9.0 -PERSONAL PROTECTIVE EQUIPMENT (PPE)
9.1. Personal Protective Equipment use is based on risk. A risk assessment is completed to identify Personal
Protective Equipment needs based on the site conditions and the scope of work. Where job conditions change,
Personal Protective Equipment selection is reviewed to ensure it is still valid.
9.2. Personal Protective Equipment is specified for all work activities based on the risk assessment. Typical basic
Personal Protective Equipment in the work areas is:
■■hard hat
■■safety-toed shoes
■■safety glasses
■■gloves
■■hearing protection (ear plugs and/or ear covers)
■■long sleeves and trousers or coveralls.
Specialty Personal Protective Equipment (e.g. flame resistant clothing, fall protection, goggles, face shields,
specialty gloves, respiratory protection, personal floatation devices) is specified by procedure and work activity or
work area.
Areas where specialized Personal Protective Equipment is required (e.g. high noise, radiation, chemical storage
areas, hydrocarbon process areas) are marked with prominent signage, universal symbols or language of the
workforce to ensure that personnel are aware of the additional hazards and requirements for Personal Protective
Equipment.

3. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
IOGP Recommended Practices 9.0 -PERSONAL PROTECTIVE EQUIPMENT (PPE)
9.3.Personal Protective Equipment is high quality and readily available to workers at no cost (except for
everyday clothing such as long sleeves shirts and pants/trousers), including regular supply of Personal
Protective Equipment and replacement in case of damage or wear and tear.
■■All Personal Protective Equipment types are certified by recognized authorities
■■All Personal Protective Equipment are inspected, used, stored, and maintained in alignment with
manufacturer’s requirements and recommendations and inspection records maintained Proper fit of
Personal Protective Equipment is checked when issued. Baggy or loose clothing is not allowed. Respiratory
protection is fit according to manufacturer’s recommendations.
■■If the Personal Protective Equipment no longer provides the intended level of protection, it is repaired or
replaced immediately at no cost to the worker
■■Personal Protective Equipment which is no longer usable is destroyed before being discarded.
9.4. Personnel receive Personal Protective Equipment training such that they:
■■Are aware of the basic Personal Protective Equipment requirements, and of situations requiring additional
Personal Protective Equipment in their work area
■■Are able to select the appropriate Personal Protective Equipment based on the potential hazards and risk
to be encountered
■■Are able to put on and take off the Personal Protective Equipment
■■Are able to care for and keep clean the Personal Protective Equipment Understand the limitations of the
Personal Protective Equipment.
9.5. Site Management has a verification system in place to ensure that personnel are complying with the
established requirements for Personal Protective Equipment.

4. PERSONAL PROTECTIVE EQUIPMEMT
PERSONAL PROTECTIVE EQUIPMENT USAGE
Hard Hat
TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)

5. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
When using PPE ………..
✓Assess & determine hazards
✓Select correct type of PPE
✓Proper use
✓Proper fit
✓Training on use, limitation,
care, maintenance, useful
life and disposal

6. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Eye Protection protects against …..
✓Flying Objects
✓Chemical splash -Liquid
✓Gases / Vapor / Fume
✓UV & IR Radiation
Blur-Blur
Cannot See !
EYE PROTECTION

7. EYE PROTECTION
HAZARDS TO THE EYES
TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)

8. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
EYE PROTECTION TYPES OF EYE PROTECTION

9. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
EYE PROTECTION
USE OF FACE SHIELD FOR EYE PROTECTION

10. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Ear Protection protects against ……..
✓Excessive noise (>85dBA)
Huh ? What did
you say ?
Can’t
hear clearly.
EAR PROTECTION

11. HEARING PROTECTION
Protect against
excessive noise, use
hearing protection.
USE OF EAR DEFENDER
TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)

12. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
TYPES OF EAR DEFENDER

13. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Respiratory Protection protects against …
✓Hazardous airborne contaminant
Example :
dusts, fogs, fumes, gases, smoke, vapor
✓Low Oxygen Content H2S
RESPIRATORY PROTECTION

14. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
POSITIVE TEST NEGATIVE TEST
CHECK TO ENSURE GOOD and TIGHT FIT

15. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
RESPIRATORY PROTECTION
ENSURE GOOD SEAL AROUND FACE
X

16. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
RESPIRATORY PROTECTION
TYPES OF RESPIRATORY PROTECTION

17. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
RESPIRATORY PROTECTION
TYPES OF RESPIRATORY PROTECTION

18. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Head Protection protects against ……..
✓Falling Objects
✓Overhead Hazards
Ah ….. a
falling rock !
HEAD PROTECTION

19. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
HEAD PROTECTION
TYPES OF RESPIRATORY PROTECTION

20. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Fall Protection protects against ....…
✓Falling Hazards.
It distributes the force
throughout the body.
FALL PROTECTION

21. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
FALL PROTECTION
PROPER DONNING OF SAFETY HARNESS

22. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Foot Protection protects against ……
✓Foot injuries
Example : falling or rolling objects ,
objects piercing the sole,
electrical hazards, slip,
waterOUCH
FOOT PROTECTION

23. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
FOOT PROTECTION TYPES OF SAFETY SHOES

24. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
Hand Protection protects against ……….
✓Absorption of harmful substance
✓Severe cuts or lacerations or abrasion
✓Burns (chemical, thermal)
✓Punctures
✓Extreme temperatures
HAND PROTECTION

25. HAND PROTECTION
CHECK FOR WEAR
AND TEAR
ENSURE PROPER FIT
HAND GLOVE FITTING
TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)

26. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)
HAND PROTECTION
TYPES OF HAND PROTECTION

27. TOTAL DYNAMIC ENGINEERING SDN BHD (480528-X)