SATIN / SATEEN WEAVE

3,393 views 12 slides Dec 20, 2017
Slide 1
Slide 1 of 12
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12

About This Presentation

presentation on SATIN / SATEEN WEAVE
by Robiul Islam


Slide Content

WELCOME TO MY PRESENTATION Submitted To: Engr. Fahmida Siddiqa Lecturer Department of Textile Engineering Daffodil International University Submitted By: Md. Robiul Islam ID NO : 153-23-4464 Section : B Department of Textile Engineering Daffodil International University   TOPIC: SATIN / SATEEN WEAVE

Satin / Sateen

Introduction Satin weave , although more complicated, is a flexible type of weave than the plain weave. It is called ‘ Satin ’ when filament fibers such as silk or nylon are used and is called ‘ Sateen ’ when short-staple yarn like cotton is used to make it.

Features of satin/sateen The fabric surface is very smooth and lustrous. By using low twisted yarn and by increasing EPI, smoothness can be increased. Only one interlacement between warp and weft. The interlacement point is covered with adjacent long float yarn. No. of cross mark or base mark is equal to the no. of threads in repeat. Loose structure compare to plain and twill. No visible twill line. Widely used in case of jacquard design.

Classification of satin/sateen

WARP SATIN If the prominence of warp floating are seen on the fabric surface, this satin are called warp satin . Warp satin is expressed by A/1(B) Where, A=warp face and B=move no.(step value)

WEFT SATIN If the prominence of weft floating are seen on the surface of the fabric, it is called weft satin/sateen Weft satin is expressed by 1/A(B) Where A=weft face and B=move no (step value).

Move number In case of satin weave, the distance between two adjacent interlacing points is known as move number/step value.

Advantages and disadvantages of satin weave  These constructions produce smooth, lustrous, rich looking fabrics that give reasonably good service if they are not subjected to excessive hard wear. Satin weave usually requires more shafts in the weaving than do the plain or twill weaves there by increasing the cost of production. 

Uses of Satin weave Widely used to produce lace. Desks wear, curtain and decorative garments and upholstery. Widely used to produce coat and suiting. Used to produce multiply fabric. Used to produce very costly fabric because of its smoothness. Widely used incase of jacquard design in basic weave. Used as ladies dress.

THANK YOU FOR YOUR ATTENTION