Step-by step-Guide for Reset D-Link WiFi Extender.

To reset D-Link WiFi extender, follow these steps. Firstly, locate the reset button on the extender. Then, using a paperclip or a pointed object, press and hold the reset button for about 10-15 seconds. While holding the button, you'll notice the LEDs blinking, indicating the reset process.
Once the lights stabilize or turn off, release the reset button. This action will reset your D-Link WiFi extender to its factory settings, allowing you to reconfigure it as needed.

1. How to Reset D-Link WiFi
Extender?

2. 1. Power On:
Ensure that your D-Link WiFi
Extender is powered on and
connected to a power source.

3. 2. Locate the Reset Button:
Find the Reset button on your extender.
Reset Button

4. 3. Press and Hold the Reset Button:
Use the tool to press and hold the Reset button for
approximately 10-15 seconds.

5. 4. Observe the Lights:
While holding the reset button, keep an eye on
the LED lights of the extender.

6. 5. Release the Reset Button:
Once the extender has finished rebooting, the LED lights might
stabilize or return to their default status.

7. The Wifi extender will be reset to default settings. Now,
you can configure it from the fresh.