Transmission control module

2,428 views 20 slides Aug 25, 2014
Slide 1
Slide 1 of 20
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20

About This Presentation

Transmission system is a important part for car, so a well maintain transmission system always give a better driving for a user.


Slide Content

Transmission Module Control

Function Of Transmission Module Control Responsibility

Responsibility Responsibility of this module is to get information from sensors and runs certain actuator that engage gears.

Sensors & Switches Linked With TCM 1- Valve Body 2- Shift Solenoid 3- Torque Converter Clutch solenoid 4- Gear Lever switch 5- Brake Pedal switch 6- Overdrive Switch 7- Power switch

Valve Body

Uses This valve functions as per pressure of automatic transmission fluid or signal from transmission control module.

Shift Solenoid

Uses Of Solenoid This solenoid usually controls the flow of hydraulic fluid for shifting gear. The solenoid determines the correct up shift & down shift points for all driving conditions .

Torque Converter Clutch Solenoid

Torque Converter Clutch Solenoid Uses This solenoid controls the fluid entering & exiting the torque converter clutch. It is fixed in valve body.

Gear Lever Switch

It gives signal to which mode to drive the vehicle. When you are in adventurous driving then open the switch & use electrical contact cleaner. Uses

Brake Pedal Switch

This switch is a on/off switch located in front of brake pedal. The switch gives signal when brake is pressed or released. The transmission converter clutch disengages when brake is applied & engages when brake is released. Uses

Overdrive Switch

When you want acceleration power then you can use the overdrive switch. It can be used when slow down without immediate stepping on brakes or adding braking power through engine. Uses

Power/Sports Switch

Power/Sports Switch Programming of automatic transmission is changed by power button. In power mode automatic transmission will hold gears in a long time during take off & acceleration.

Sometimes solenoid switches are not working properly so create problem for driving. If getting any problem in solenoid switch then immediately change or repair for better driving.

Thank You Resource: http://germanautospecialist.net/