Turbine flow meter

The company stands tall as an Exporter and Supplier of Liquid Turbine Flow Meters in New Delhi. The Liquid Turbine Flow Meters, offered by the company, are known for their corrosion resistant properties and superior quality. The Liquid Turbine Flow Meters provide hassle-free performance and high durability. The Liquid Turbine Flow Meters are demanded in various sectors

Details For Liquid Turbine Flow Meters
Rotational speed proportional to the velocity of the fluid
Truly represents the volume of the fluid flowing through the line
Exceptional performance
Corrosion resistant and highly durable

Specifications
Size 4"~20"
Temperature 20C~120C
Output 4~20mA DC and Pulse(Standard)
Accuracy +/-1.0%
Connection Screwed or Flange
Power Supply AC 85~230V, 50/60Hz or DC 24V or Battery (3 year)
Operating Temperature -20 ~ 120 Deg C
Ambient Temperature -20 ~ 50 Deg C
Accuracy ±1.0 %, ±± 0.5%
Output Signal 4~20mA DC and Pulse (Standard)
Display L C D 2 Line x12 character (Rate Flow /Total Flow)
Service Clear Liquid, Gases ,Air, solvent.
Flange Screwed and Flange (As per standard)
Enclosure IP67,IP65

1. This Flow meter will Provide you with a highly accurate and economical
Way of measuring liquid over the range 1 to 2150 liter/min
ZEST ENGINEERING
A Complete Flow solution
www.zestengg.co.in
Application
Turbine Flow meter
This range of flow meters is used for liquids
such as water, light oils, solvents and low
viscosity chemicals. You can use them for
batching, flow rate monitoring, controlling,
blending and filling. The flow meter is highly
accurate and often used for testing the
performance of pumps, engines, valves and
other flow meters.
Turbine meters are inferential
measurement devices that measure a
flow rate indirectly by using the natural
kinetic energy of the flow as it passes
through the angled blades of the
turbine rotor. This causes the turbine to
spin and as the blades pass by a close
pre-positioned magnetic (Or other
technology)“pick up” coil. The
resulting interruption of the coils
magnetic field by each blade results
in a pulse being produced.. The
frequency of this pulse is directly
proportional to the point velocity
reading it is taking. From this point
velocity and cross sectional area of
the pipe a rough volumetric flow rate
can be calculated.
Working Principal
ZEST
• Linearity: Better than +/-
0.5% of reading
• Repeatability: +/-0.1% of
reading
• Pressure drop: 0.5 bar at
maximum flow
• Working pressure: 35 bar
to 340 bar
• Turn down Ratio: 10:1 to
100:1
• Response Time: <
100mSec
• Transmitter Enclosure:
Specification
Turbine Flow meter

A Complete Flow solution DE-58, Sector 3, Industrial Area ,Bawana –New Delhi-39
Contact- [email protected], [email protected]
Tel: [phone]

2. ZEST ENGINEERING
A Complete Flow solution
www.zestengg.co.in
Material of construction:
A Complete Flow solution DE-58, Sector 3, Industrial Area ,Bawana –New Delhi-39
Contact- [email protected], [email protected]
Tel: [phone]
Construction
• Body: 316 Stainless Steel
• Sleeve Bearing: Carbon
graphite Filled
• Thrust balls: Tungsten Carbide
• Rotor : 431SS or terrarium
• Rotor Shaft: Tungsten
Carbide
• Hangers : 316 Stainless Steel
• Circlips : 316 Stainless Steel
• IP-65 Housing
• Remote: Display optionally
Available.
• Local Display as 8x 1 LCD
• Output: 4 to 20mA DC/Open
collector output
• Size Range: 15mm to 150mm

ZEST

3. A Complete Flow solution DE-58, Sector 3, Industrial Area ,Bawana –New Delhi-39
Contact- [email protected], [email protected]
Tel: [phone]
ZEST ENGINEERING
A Complete Flow solution
www.zestengg.co.in
ORDERING INFORMATION
Contact Our Flow Meter Measurement Specialists For Advice on you
application.([phone])
[email protected]

ZEST