Turnbuckle 01

Design of turnbuckle

1. Design Of TurnBuckle Prof Nikita. Dharesh . Mahesh . Kirtish . Sagar .

2. Defination of Turnbuckle Two round tie rods subjected to tensile loading These rods are connected by coupling This is known as Turnbuckle

3. instructions for use straight or in-line pulling only. It should be paid to prevent overloading. Tensioning : the forces on the turnbuckle must not be such that any deformation occurs. Deformation : The tension should be decreased immediately and deformed parts should be replaced. The products are regularly inspected. Inspection should take place in accordance with the safety standards given in the country of use like wear, misuse, overloading etc. with a consequence of deformation and alteration of the steel structure

4. DESIGN OF TURNBUCKLE

5. function Turnbuckles are most commonly used in applications which require a great deal of tension they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges Turnbuckles are used for tensioning a ship’s rigging and lashings. This device is also known as a bottle screw in this context.

6. Theory A turnbuckle, stretching screw or bottle screw is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eye bolts, With a left hand thread With a right hand thread A metal coupling device consisting of an oblong piece internally threaded at both ends into which the corresponding sections of two threaded rods are screwed in order to form a unit that can be adjusted for tension or length.

7. Complete Turnbuckle

8. use of turnbuckles This is used for Connecting Tie Rods Of stuctures This is used for Connecting links This is used for Connecting wire This is used for Connecting tension support of vertical pole

9. Thank You 