VST power tiller

VST SHAKTI 130DI POWER TILLER DETAILS, IT IS ABOUT SPECIFICATION, WORKING DETAILS,MAINTANCE

1. A PROJECT REPORT ON
“POWER TILLER”
(VST SHAKTI 130 DI)
WITH REFERANCE TO
V.S.T TILLERS TRACTORS LIMITED
Submitted to:
V.S.T TILLERS TRACTORS LTD, BHUBANESWAR
Guided by:
MR. G. R PATRA
SUBMITTED BY:
Soumya Ranjan Sahoo
Regd. No: 140801AGR015
CENTURION UNIVERSITY OF TECHNOLOGY AND MANAGEMENT,
PARLAKeMUNDI

2. BATCH NO-2017-2018 DATE-01:06:2017 TO 21:06:2017
ABOUT VST SHAKTI 130 DI:











Name: VST Shakti 130 DI - Power Tiller
Model: VST 130 DI
Overall Dimensions (L x W x H): 2360 x 900 x 1210 mm

ENGINE SPECIFICATION:
Model: VST Shakti 130 DI
Type: Horizontal 4 stroke single cylinder water cooled diesel
engine /OHV
Combustion Chamber: Direct Injection (DI)
Bore: 95mm
Stroke: 95mm
Displacement: 673cc
Compression Ratio: 18:1
Max. Torque: 4.2 kg-m /1600 rpm

3. Max.HP: as per IS 13539 1996 13.0HP@2400 rpm
SFC (Specific Fuel Cons): 190 g/hp/hr
Governor System: Mechanical, Centrifugal type
Cooling System: Condenser Type Thermo siphon cooling system
Starting System: Hand Cranking
Lighting System: 12 volts / 35 watts
Std. Pulley (DIA): 100 mm / optional 120 mm
Dry Weight: 125 kgs

FUEL SYSTEM:
Fuel: High speed diesel
Fuel Tank Capacity: 11 ltrs

LUBRICATING SYSTEM:
Oil Sump Capacity: 2.8 ltrs
Type: Force feed type Trochoid pump
Air Cleaner: Multistage, oil bath type with cyclonic pre-cleaner

TRANSMISSION SYSTEM:
Model: CT 85
Type: Side drive transmission
Forward: 6 speeds
Reverse: 2 speeds
Rotary: 2 speeds (Optional 4 speeds)
Clutch: Multiple plate dry disc type
Brake: Hand operated internal expanding metallic shoe type
Weight: 280 kgs

FIELD OPERATION:
Tilling Width: 600 mm max
No. of Tynes: 18

4. Tilling Depth: 150 mm max
Plough Depth; 220 mm max




SPEEDS:
GEAR SPEED (Kmph)
FORWARD
OPTIONAL
PULLEY
STANDARD
PULLEY
L1 1.78 1.48
L2 2.62 2.18
L3 4.11 3.43
H1 6.31 5.26
H2 9.26 7.72
H3 14.16 12.18
REVERSE
L 1.53 1.28
H 5.47 4.56

Axial Flow Thresher:
Key Benefits:
 Ideal replacement for manual method of threshing.
 Post threshing the grains can be collected in a tray / bag.
 Grains come out cleaned after passing through a sieve and
fan.
 Threshers are fitted with pneumatic tyres for easy
transportation.
 A platform is provided for a person to stand and feed.

5.  Blowers are made available on request for very fine
cleaning.
FEATURES:
 Straws are thrown out to 4.6 to 7.6 meter away with the
help of a powerful fan.
 These can be collected in gunny bags or directly into a
trailer.
 Threshers are fitted with 6x16 pneumatic tyres for easy
transportation.
 A platform is provided for a person to stand and feed.
TECHNICAL SPECIFICATION:
Grain Output 1500 kgs / hr
Average Fuel Consumption 1.5 - 2.25 ltrs / hr

 Reaper:
A reaper attachment is used for cutting of crops at harvest time.
Key Benefits:

6.  Reaper fitted with the tiller is the best replacement for
manual reaping.
 Saves labour & time for cutting the crops.
 Very easy to operate the reaper fitted with the tiller.
 The cut crops are carried to one side of the tiller operator
by a conveyor belt.

FEATURES :
 Reaper fitted at the front of the tiller is driven through a belt
connected to engine pulley.
 Reaper cuts the crop 5 ~ 7.6 cms above the ground level.
 Width of the cut is 120 ~ 150 cms and is very economical in
operations.
 Cut crops are collected manually.
TECHNICAL SPECIFICATION:
Field Coverage 0.35 to 0.5 acres / hr
Average Fuel Consumption 1.5 - 1.75 ltrs / hr

7.  Bullock Type Inter Cultivator
Inter-cultivation, also known as interculturing, is the cultivation
of soil between crop rows. In other words, the soil between two
rows of crop is ploughed using dedicated plough equipment for
weeding, improving soil aeration and loosening the soil
compaction.


FEATURES:
 A simple design attachment helps for inter cultivation in
between the rows of cotton crops.
 Weeds / unwanted grass / plants are removed by using this
attachment without damaging the main cotton crop.
 A person can stand on the attachment and drive the tiller.
 The field can be levelled using a Blade in the place of
cultivator.

8. TECHNICAL SPECIFICATION:
Field Coverage 1.25 to 2 acres / hr
Average Fuel Consumption 1 - 1.25 ltrs / hr



 Multi-Purpose Bracket:
With a multi purpose bracket following 4 implements can
be used:
1. Cage Wheel / Lugged Wheel
2. Sprayer Unit
3. Water Pump
4. A.C. Generator

9.  Fertilizer cum Seed Drill Attachment:
This is an exclusive attachment fitted to the Tiller after removing
rotary assembly.
 It is used for sowing seeds and spreading of fertilizer in a
row.
 It consists of separate boxes for seed and fertilizer, a shoe
type furrower and a spliced ground wheel.
 It is suitable for sowing seed of Wheat, Soya Bean, Bengal
Gram etc.

10. TECHNICAL SPECIFICATION:
Field Coverage / Day 1.25 to 2.25 acres
Average Fuel Consumption 1.25 ltrs / hr
Working Width 660 - 900 mm

Generator:
The engine can be used as a Prime mover to couple with suitable
standard Generator available in the market.
The Generator can be used for operating:
 Submersible Pumpsets
 Water Pump
 Domestic Requirements
TECHNICAL SPECIFICATION
General Capacity 7.5 kVA
Average Fuel Consumption 1.5 to 1.75 ltrs / hr

11. Auger Digger
Attachment used for making holes varying from 6 - 8 inch in
diameter and 18 x 24 inch deep in – with 15 - 20% moisture soil
Mostly used for Planting:
 Banana
 Papaya
 Mango
 Pomegranate
 Guava
 Chiku
 TECHNICAL SPECIFICATION
Capacity 12 - 15 holes/hr
Average Fuel Consumption 1 ltr / hr



Sprayer Unit
The sprayer is used for spraying pesticides and insecticides to
avoid the pests in following areas:

12.  Coconut
 Chiku
 Pomegranate
 Grapes
 Guava
 Banana
 Papaya
 Mango
TECHNICAL SPECIFICATION
Discharge (Free Flow) 36 ltr/min
Average Fuel Consumption 1.25 to 1.5 ltrs / hr

Water Pump
1. Domestic Water Pump
Pumping water from irrigation canals, rivers and wells, etc.,
2. Self Priming Pump
Self Priming Pump with tanker can be fitted for cleaning septic
tanks; Cess pools, clogged drainage, community wells etc.,
TECHNICAL SPECIFICATION

13. Suction Head (Height) 25 feet
Delivery Head (Height) 25 - 30 feet
Discharge 440 ltr/min
Average Fuel Consumption 1.25 to 1.5 ltrs / hr

Trailer
Trailer of 1.5 tons capacity can be fitted for transport of goods.
Type of Trailers:
 Standard
 Mechanical Tipping
 Hydraulic Tipping
 Garbage trailer for collection of Garbage &
Transportation
 Water tanker of capacity 1000 ltrs can also be fitted to
 Power Tiller for carrying drinking water
TECHNICAL SPECIFICATION
Capacity 1.5 tons
Type Non Tipping / Tipping

14. Accessories Required
Hitch Bracket Assembly
Handle Weight Assembly
Average Fuel Consumption 1.0 to 1.25 ltrs / hr

Shorter Rotary (340mm)
 Power Tiller fitted with a shorter rotary (340 mm) and
extended lugged wheel is used for inter cultivation
operation for deweeding and loosening the soil in Sugar
cane fields.
 A smaller furrower specially designed for Sugar cane
field, can be used for bund formation which also helps in
irrigation.
 After Sugar cane harvesting, shorter rotary can be used
for removing stubbles.
 The stubble is pulverised and is mixed with the soil
thereby forming organic manure.
TECHNICAL SPECIFICATION
Field Coverage / Day 1.5 to 2 acres
Short Rotary Width 340 mm (13 inches)

15. Attachment:
1. Smaller furrower
2. Extended lugged wheel

1 No.
1 Pair
No. of tynes 10 Nos.
Average Fuel Consumption 1.5 to 2 ltrs / hr

Ridger (Furrower)
 The Ridger is used for making ridges for row crops such
as Sugercane, Potato, chillies, tobacco, banana etc. as well
as for opening furrows for water flow.
 The ridger should be used when the soil is slightly moist
and used only after tilling the land once or twice.
 The Ridger is fitted on the Rotary assembly with the help
of a special bolt & nut.
 TECHNICAL SPECIFICATION

Field Coverage / Day 1 to 1.25 acres
Average Fuel Consumption 1.5 to 2 ltrs / hr
Depth of Furrow (adjustable) 250 to 300 mm (10 - 12 inches) max
Width of Furrow (adjustable) 375 to 450 mm (15 - 18 inches) max

16. Two Share Plough
 Has two shares to plough tilling in unidirection.
 Coverage is twice compared to reversible Mould Board
plough.
 Suitable for ploughing virgin land which is not tilled for
long period.
 Tills the soil which has deep roots, unwanted plants,
shrubs and weeds.

17. Cultivator
Five tyne Cultivator fitment is commonly used as a secondary
tillage equipment mostly in dry lands for loosening the soil,
removal of crop roots, weeds and for Intercultivation in orchards
etc. A little moisture in the field increases the tilling efficiency.
 TECHNICAL SPECIFICATION
Model Name 5 tynes cultivator
Field Coverage / Day 2.5 to 3 acres
Average Fuel Consumption 1.25 to 1.5 ltrs / hr
Depth of cut 100 mm to 150 mm (4 - 6 inches)
Width of cut 600 mm (24 inches)

Cage Wheel
 This wheel is very effective in fields where the soil is
loose and sinking.
 Best suitable for puddling operation.

FEATURES
 Decreases load on tiller
 Helps to improve traction performance

18.  Easy to fit
 Cage wheel with float is provided

 TECHNICAL SPECIFICATION
Model Name Cage Wheels set
Outer Diameter 690 mm
Ring type Solid bar (10 mm)
Inner Diameter 220 mm (thick flat circle)
Number of Lugs 24 Angle type
Dimensions of lug (l x w x t) (170 x 30 x 3) mm
No of fitting hole 9