walplast products pvt. limited

walplast,subham

1. Presented by-Subham K umar G hosh

2. Introduction It is established in 2004 It is an ISO certified company Walplast have 6 manufacturing unit in all over India It is the highest manufacturing wallputty company It is a fastest growing company in wallputty passionate about quality and innovation

3. Products Ready mix plaster Tile adhesive Masterplast

4. Ready mix Plaster It is plaster which is ready to use at site by just mixing water. It helps to eliminate job site mixing practices. It is useful for both interior as well as exterior walls. It provides protection against penetration of rainwater and other atmospheric change

5. Ready mix Plaster Ingredients 4 type of sand 0 – 0.5mm 0.5 – 1mm 1 – 2mm 2 – 3.5mm Grey cement Polymers

6. Ready mix Plaster Features and Benefits Compact plaster, reduce void gap Negligible silt content Reduces rebounding loss Cuts the repair and maintenance cost Paint finish wall Increases workability

7. Ready mix Plaster Preparation , Mixing , Application 7-8 litre of water for 40 kg bag 4-5 mintues mixing , wait for 2-3 minutes and remix again and it is ready for use Use steel trowel or wooden float for optimum bonding

8. Ready mix Plaster Coverage 10-12mm light weight blocks is 17-18 sq.ft 10-12mm brick wall is 14-15 sq.ft 18mm light weight blocks is 11 sq.ft 25mm brick wall is 7- 7.5 sq.ft 10mm RCC is 20-22 sq.ft Pot life is 90 mins Intial setting time is 30 mins and final setting time is 600 mins

9. Tile Adhesive It is ISI certified tile adhesive product Is available in 3 categories Silver star Gold star Platinum star It contains high performance polymer

10. Tile Adhesive Ingredients Highest grade of graded sand Grey cement for silver and gold star tile adhesive white cement for platinum star tile adhesive Polymers Selective fillers Chemical additives

11. Tile Adhesive Features and benefits Excellent bonding to the base plaster which gives better workability and durability Water resistant which is suitable for both interior and exterior wall Can be used on new as well as old wall and floors Consistent work quality

12. Tile Adhesive Application & Mixing and Preparation Silver Star and Gold star for 20 kg bag 5-5.5 litre water Platinum star requires 6-6.5 litre water for 20 kg bag Silver star is also available in 40 kg bag which require 10-11 litre water Mix the content till it become lump free wait for 5 mins and remix again for 2 mins and it is ready to use Use a steel trowel / blade to apply the mix Use a notched trowel to remove excess material, which is 6mm brush size.

13. Tile Adhesive Coverage and Technical detail Open time 20 mins Adjustability time 5-15 mins Pot life 30 mins Initial setting time 30 minute Setting time 24 hours 2-3 sq.ft /kg for 3mm thickness

14. It is chemically active agent that improves the water retention It creates smooth surface and it helps in to spread plaster easily It helps to reduce cracks due to quality in built fibres

15. Ingredients and Application Lime and high quality polymers 500 gm pouch for 50 kg cement

16. Features and Benefits Excellent workability Optimum drying time Increase bond strength of mortar Easy spreadability Reduces re-bonding losses Reduces crack formation

17. Why us ? Timely delivery Passion for innovation & Quality Transparent business policies Cost-effective prices Well trained professionals A long list of satisfied clients

18. Contact us Walplast Prtoducts Private Limited Rainbow Building ,plot no. 13, sector-24,Near Shikara Hotel,Opposite S anpada Railway station , Turbhe N aka , V ashi,Navi Mumbai, Maharashtra -400705,india www.walplast.co.in

19. THANK YOU