022 Manual Handling.ppt for safe handling of material & about body posture

Ashrafshaikh81 342 views 26 slides Aug 10, 2024
Slide 1
Slide 1 of 26
Slide 1
1
Slide 2
2
Slide 3
3
Slide 4
4
Slide 5
5
Slide 6
6
Slide 7
7
Slide 8
8
Slide 9
9
Slide 10
10
Slide 11
11
Slide 12
12
Slide 13
13
Slide 14
14
Slide 15
15
Slide 16
16
Slide 17
17
Slide 18
18
Slide 19
19
Slide 20
20
Slide 21
21
Slide 22
22
Slide 23
23
Slide 24
24
Slide 25
25
Slide 26
26

About This Presentation

ehs manual handling


Slide Content

Manual Handling

2
Introduction
Personnel training
Training focus
Common injuries
Causes of injuries
Planning a lift
Handling of chemicals
PPE requirements
Summary
Course Outline

3
Manual handling is very common in the construction
industry as a method for material transfer. Though
mechanical means are available, it is not always
practicable.
The risk of injury can be reduced through training and
application of correct lifting &handling techniques.
Introduction

4
Training Focus
Training must focus on
the following areas:
Common injuries
Causes of injuries
Planning manual lifts
PPE requirements
Other requirements
May Injure Your back

5
Types Of Injury Caused by handling
Accidents
65%
9%
7%
7%
5%
7%
Sprain & strain
Superficial
Contusion
Lacerations
Fractures
Others

6
Common injuries include:
Strains and sprains to joints &
muscles
Torn ligaments & tendons
Slipped discs, tears and
hernias
Cuts & abrasions
Back injuries
Crush injuries (fingers, toes)
Common Injuries
Hernias
Fractures
Wounds

7
Bad postures (sudden movements,
twisting, jerking)
Heavy loads (loads beyond ones
capability)
Rough surfaces (sharp, jagged
edges, splinters, projections)
Crushing (heavy loads, no wedges)
Lack of knowledge (load weight)
 Obscured vision (walking
backwards, load blocking vision)
Cause of Injury
Strains
&
Sprains
Moving Wrong Way

8
Planning a Manual Lift
In planning a manual lift, a lot of factors
needs to be considered;
Lifting capacity
The nature of the load
Kinetic method consideration
Grasping of the load
Carrying the load
Provision of hand hooks
Team lifting
Use of rollers
Mechanical options

9
A: Lifting capacity
When lifting any load, we should
consider the following:
Personal physique, age,
condition, training, technique.
Nature of load (compact, wide,
etc)
Weight of load
Load’s centre of gravity
Distance load has to be moved
Means of moving the load
Planning a Manual Lift

10
B: The nature of the load
The manner load is packaged has a
lot to do with its handling:
If load is heavy, can it be moved in
bits (it is easier for 50kg in five 10
kg bits than one single 50kg once).
Absence of lifting/handling points
Does its nature permit rolling,
slewing, or pushing?
Does its nature permit assistance?
Planning a Manual Lift

11
C: Kinetic method of lifting
This entails proper body posture for
lifting:
Correct feet positioning
Flexible knees
Straight back
Keeping arms close to the body
Correct grip/hold
Chin in, head up
Use of body weight
Planning a Manual Lift

12
D: Grasping the load
When lifting any load, the
posture to be adopted is
essential to the safe handling:
Movements should be smooth
and natural (avoiding twisting,
jerking).
Straightening the legs, back
erect )
Looking straight in the
direction of movement.
Planning a Manual Lift
Good Bad

13
E: Carrying the load
Firmly grasp, close to body,
move directly to deposit load.
Keep load centre of gravity to
that of the body.
Load must not obstruct view
Grip must not be changed while
load is already lifted.
If grip must change, rest load on
a support first.
Planning a Manual Lift

14
G : Team lifting
When load is large, awkward etc, ask
for assistance:
Assistance to be of similar height and
body weight.
Get further assistance to direct lifting
operation.
Planning a Manual Lift
F: Provision of hooks if load is
unwieldy (irregular in shape)
Provide hand hooks to ease carriage
Have a proper grip before lifting

15
H: Use of roller devices
If the nature of the load permits
rolling, slewing, or pushing.
Insert steel pipes under front of
load and load pushed
Absolute care to be taken by
personnel inserting the steel
pipes to avoid hand crushing
injuries.
Planning a Manual Lift

16
I : Mechanical options
For every manual handling, always
consider the option of a safer
mechanical
Lifting.
Pulleys
Come-along
Fork lifts
Cranes
Others
Planning a Manual Lift

17
TO PREVENT PAIN, INJURIES
AND DAMAGE ..
Examine &
test…
Plan the job…
Get a good grip
and breath...
Get help…
Rest
frequently…
Wear PPE
Talk…
Lift…

18
Think!!
Stand…
Bend…
Grasp…
Raise…
Lift slowly
and …
Hold…
Lifting – One Person Squat

19
Keep the Load
close to the
Body..
Keep arms..
Don’t change..
Don’t block….
Avoid twisting…
Carrying
Take small steps

20
Unloading
Bend…
Be careful…
Slide…
Place…

21
Why back pain happens?
Poor posture
including sitting in a stationary position for long periods
(driving or at desk)
Poor Physical Condition
Will cause back pain
Repetitive Trauma

Physical overload

22
Limited Mobility limited in physical movements
Decreased Activity can’t move around as much
Change in life style can’t do all the things you used to
be able to do.
Loss or reduction in revenue can’t work or have to change jobs.
Depression from the changes above
Pain & Suffering caused
by Back Injures

23
Before the handling and use of chemical, the
individual must read and understand the
manufacturers instruction through the MSDS,
the information included but limited to:
Chemical composition
Exposures limit
Storage requirements
Safe handling method
First Aid measures
Disposal requirement
PPE requirement
Emergencies
Handling of Chemicals
SPECIFIC
HAZARD

24
Helmets – Protect against
accident knocks.
Long-sleeved shirts – Protects
against abrasions of the skin
Steel toed boots – Protects
soles, toes, feet, from sharp
objects
Hand gloves – Protects palms,
fingers against abrasions & cuts
PPE Requirements

25
Prior to any manual lifting operation taking place the
following must be performed
Assess the manual handling task to identify and reduce the
risk that may be inherent in the operation
Where possible, eliminate the need to carry out the manual
handing operation
Where risk is identified, implement mitigation measure to
reduce the risk
Consideration must be given to limiting the weight to be lifted
manually, 25kg is recommended as a maximum for one
person
Summary

26
The most serious lifting related injury is the BACK
INJURY.
Take good care of your back at all times to help
prevent painful and disabling injuries.
You can protect yourself !
ConclusionConclusion