CSS - 3 rd Quarter Quiz Direction: Identify what is being asked. Write your answer on a sheet of paper. _________1. It is a number that is used to identify a device on the network. _________2. It is the way a system is set up. ________ 3. The IP address class which indicates that the first octet of the IP address is the network portion. _________4. The IP address class which indicates that the first two octets of the IP address are the network portion. _________5. This indicates the network portion of an IP address.
_______6. It is the 32 binary bits which are grouped into four 8-bit bytes. _______7. An IP address class which is reserved for research use only. _______8. The address 255.255.255.0 belongs to what class of IP address? _______9. An IP address class used for multicast groups. _______10. A notation or a method of writing IP addresses with where value of each byte is given as a decimal number, and each byte separated by a dot. Continue …
_____11. It is called a logical 32-bit IP address wherein network portion indicates the network on which each unique host is located. _____12. It is called a device that sends and receives information on the network. _____13. It is assigned to the host Network Interface Card and known as the physical address which can not change regardless where the host is placed on the network. _____14. A version of IP address which is currently and widely used. _____15. A default subnet mask for a usable Class C IP Address. Continue…
Continue…. _____16. A 32-bit IP Address is grouped into how many 8 bit bytes? _____17. It is an Oversees Global IP Address Allocation. _____18. An acronym APNIC stands for _____. _____19. In an IPv4, a Class C IP address has a first octet binary value ranges to ________. _____20. A host subnet mask of 255.255.255.0 has a subnet IP of 256, what is the host’s total usable IP address in the subnet.
______1. In every personal computer, it is necessary to install a network driver. ______2. The default subnet mask of a Class B IP Address is, 255.255.0.0. ______ 3. Assigning an IP Address must be unique. ______4. In setting up Time, you can set time automatically. ______5. DHCP is a Command Prompt command used to test the ability of the source computer to reach a specified destination computer. Write TRUE if the statement is correct and FALSE if otherwise.
Continue… ______6. The key to a well-tuned computer system is the proper configuration. ______7. In installing a network driver, compatibility on PC must be considered. ______8. IP addressing is a number that is used to identify a device on the network. ______ 9. The shortcut of Microsoft Configuration is Ipconfig. ______10. Configuration is the way a system is set up.