756049918-API-RBI-580-Questions-1-300-1-33.pdf

api 580rbi

1. Q-01: Foreword
API 580 is intended to provide guidance on developing an RBI program for:
A) Fixed equipment and piping in the hydrocarbon and chemical process industries
B) All types of equipment and piping in the Oil and Gas Industry
C) Fixed equipment and piping in the Oil and Gas Industry
D) All types of equipment and piping in all industries

2. Q-01: Foreword
API 580 is intended to provide guidance on developing an RBI program for:
A) Fixed equipment and piping in the hydrocarbon and chemical process
industries
B) All types of equipment and piping in the Oil and Gas Industry
C) Fixed equipment and piping in the Oil and Gas Industry
D) All types of equipment and piping in all industries

3. Q-02: Foreword
An RBI Program is based on the knowledge and experience of:
A) Engineers and inspectors in the Oil and Gas Industry
B) Engineers and inspectors in the hydrocarbon and chemical industry only
C) Engineers ,inspectors ,operators and management in the Oil and Gas industry
D) Engineers, inspectors, risk analysts, and other personnel in hydrocarbon and
chemical industry

4. Q-02: Foreword
An RBI Program is based on the knowledge and experience of:
A) Engineers and inspectors in the Oil and Gas Industry
B) Engineers and inspectors in the hydrocarbon and chemical industry only
C) Engineers ,inspectors ,operators and management in the Oil and Gas industry
D) Engineers, inspectors, risk analysts, and other personnel in hydrocarbon
and chemical industry

5. Q-03: Foreword
Based on results of an RBI assessment, API 510/570/653 inspection codes
and standards allow an owner/user the latitude (option) to plan an inspection
strategy and:
A) Decrease the code designated inspection frequencies and activities
B) Eliminate the code designated inspection frequencies and activities
C) Increase or decrease the code designated inspection frequencies and activities
D) None of these are correct

6. Q-03: Foreword
Based on results of an RBI assessment, API 510/570/653 inspection codes
and standards allow an owner/user the latitude (option) to plan an inspection
strategy and:
A) Decrease the code designated inspection frequencies and activities
B) Eliminate the code designated inspection frequencies and activities
C) Increase or decrease the code designated inspection frequencies and
activities
D) None of these are correct

7. Q-01: Introduction
API 580 provides information on using risk analysis to develop an effective:
A) PSM Program using RBI
B) Inspection plan
C) RBI program
D) None of these

8. Q-01: Introduction
API 580 provides information on using risk analysis to develop an effective:
A) PSM Program using RBI
B) Inspection plan
C) RBI program
D) None of these

9. Q-02: Introduction
API 580 provides information on using risk analysis in order to:
A) Develop an effective Inspection plan
B) Develop and Implement a Risk Based Inspection (RBI) program
C) Develop, implement and maintain an optimized Inspection program using RBI
D) Integrate information into RBI Program from PSM and other related risk
information

10. Q-02: Introduction
API 580 provides information on using risk analysis in order to:
A) Develop an effective Inspection plan
B) Develop and Implement a Risk Based Inspection (RBI) program
C) Develop, implement and maintain an optimized Inspection program using RBI
D) Integrate information into RBI Program from PSM and other related risk
information

11. Q-03: Introduction
A systematic process that begins with identification of facilities or
equipment and ends up as an inspection plan is called:
A) RBI program
B) Inspection planning
C) PSM Program using RBI
D) RBI Program using PSM

12. Q-03: Introduction
A systematic process that begins with identification of facilities or
equipment and ends up as an inspection plan is called:
A) RBI program
B) Inspection planning
C) PSM Program using RBI
D) RBI Program using PSM

13. Q-04: Introduction
An RBI assessment systematically evaluates:
A) Both the POF and COF
B) Cause of Failure (COF) only
C) Probability of Failure (POF) only
D) Both the Cause of failure and the POF

14. Q-04: Introduction
An RBI assessment systematically evaluates:
A) Both the POF and COF
B) Cause of Failure (COF) only
C) Probability of Failure (POF) only
D) Both the Cause of failure and the POF

15. Q-05: Introduction
In RBI, what should be evaluated by considering all credible damage
mechanisms that could be expected to affect the facilities or equipment ?
A) Root cause of Failure (RCOF) only
B) Possibility of Failure (POF) only
C) Both the RCOF and POF
D) Both the POF and COF

16. Q-05: Introduction
In RBI, what should be evaluated by considering all credible damage
mechanisms that could be expected to affect the facilities or equipment ?
A) Root cause of Failure (RCOF) only
B) Possibility of Failure (POF) only
C) Both the RCOF and POF
D) Both the POF and COF

17. Q-06: Introduction
An RBI assessment systematically evaluates:
A) POF for all credible damage mechanisms
B) All credible damage and failure modes
C) All credible damage mechanisms
D) POF and COF

18. Q-06: Introduction
An RBI assessment systematically evaluates:
A) POF for all credible damage mechanisms
B) All credible damage and failure modes
C) All credible damage mechanisms
D) POF and COF

19. Q-07: Introduction
The POF assessment should be evaluated by considering:
A) All consequences of failure (COF)
B) All credible damage mechanisms
C) All root causes of failure and COF
D) None of these are correct

20. Q-07: Introduction
The POF assessment should be evaluated by considering:
A) All consequences of failure (COF)
B) All credible damage mechanisms
C) All root causes of failure and COF
D) None of these are correct

21. Q-08: Introduction
An RBI plan produced per API 580 guidance should be combined with which
of these elements to provide the basis for sound management of the integrity
of fixed equipment:
A) A comprehensive set of IOWs for each process unit and a rigorous MOC
program
B) An inspection plan using risk-prioritized and risk-informed methods
C) Inspection planning using risk-based methods
D) None of these is correct

22. Q-08: Introduction
An RBI plan produced per API 580 guidance should be combined with which
of these elements to provide the basis for sound management of the integrity
of fixed equipment:
A) A comprehensive set of IOWs for each process unit and a rigorous MOC
program
B) An inspection plan using risk-prioritized and risk-informed methods
C) Inspection planning using risk-based methods
D) None of these is correct

23. Q-09: Introduction
RBI is synonymous with:
A) Risk-based analysis
B) Risk-based analysis and risk management
C) Risk-prioritized and risk-informed inspection
D) Risk-prioritized analysis and risk management

24. Q-09: Introduction
RBI is synonymous with:
A) Risk-based analysis
B) Risk-based analysis and risk management
C) Risk-prioritized and risk-informed inspection
D) Risk-prioritized analysis and risk management

25. Q-10: Introduction
RBI is synonymous with which of these following elements?
A) Risk-prioritized inspection only
B) Both risk-prioritized and risk-informed inspection
C) Inspection planning using risk-based methods only
D) Risk-prioritized , risk-informed inspection and inspection planning using risk-
based methods

26. Q-10: Introduction
RBI is synonymous with which of these following elements?
A) Risk-prioritized inspection only
B) Both risk-prioritized and risk-informed inspection
C) Inspection planning using risk-based methods only
D) Risk-prioritized , risk-informed inspection and inspection planning using
risk-based methods

27. Q-11: Introduction
RBI is synonymous with risk-prioritized/risk-informed inspection and
inspection planning using:
A) Risk analysis methods
B) Risk-based methods
C) Risk management
D) None of these

28. Q-11: Introduction
RBI is synonymous with risk-prioritized/risk-informed inspection and
inspection planning using:
A) Risk analysis methods
B) Risk-based methods
C) Risk management
D) None of these

29. Q-12: Introduction
A synonym for probability recognized by API 580 but not used in the
document is:
A) Likelihood
B) Possibility
C) Chance
D) Event

30. Q-12: Introduction
A synonym for probability recognized by API 580 but not used in the
document is:
A) Likelihood
B) Possibility
C) Chance
D) Event

31. Q-01: General [1.1]
API 580 provides information on using risk analysis to:
A) Develop an RBI Program
B) Assist PSM Programs using RBI
C) Develop an effective Inspection Plan
D) Develop an optimized Inspection Program

32. Q-01: General [1.1]
API 580 provides information on using risk analysis to:
A) Develop an RBI Program
B) Assist PSM Programs using RBI
C) Develop an effective Inspection Plan
D) Develop an optimized Inspection Program

33. Q-02: General [1.1]
The purpose of API 580 is to provide users with the basic elements
necessary to:
A) Develop, implement and maintain an optimized Inspection program using RBI
B) Develop and maintain an RBI Program managed with risk-prioritized inspection
plans
C) developing, implementing, and maintaining a risk-based inspection (RBI)
program and developing and implementing an inspection program.
D) Develop, implement and maintain an optimized Inspection Program using risk-
based inspection Plans