Auto cutmanual

1
AutoCut A
utoCut AutoCut AutoCut WEDM WE DMWEDM WEDM Program-Control P rogram-Control Program-Control Program-Control System S ystemSystem System Instruction I nstruction Instruction Instruction

2
CONTENT
CONTENT ........................................................................................................................ 2
Chapter 1The Introduction of AutoCut WEDM Program-Control System .................................. 1
1.1 Introduction .......................................................................................................... 1
1.2 The Structure of AutoCut System ............................................................................. 1
1.3 Main functions of AutoCut system ........................................................................... 2
1.4 Main Characteristics of AutoCut System ................................................................... 3
1.5 Running condition of AutoCut System ...................................................................... 3
Chapter 2AutoCut system hardware and software installation .................................................. 4
2.1 Hardware Installation ............................................................................................. 4
2.2 Software installation .............................................................................................. 7
2.3 Uninstall Software ........................................................................................... 7
Chapter 3The usage of NCCAD .......................................................................................... 9
Chapter4 The usage of AutoCut For AutoCAD ..................................................................... 10
4.1Draw Wedm Curve ................................................................................................ 11
4.2 Track Designing ................................................................................................... 13
4.3 Track process ....................................................................................................... 21
4.4 Track Amendment ................................................................................................ 23
4.5 Technics Library .................................................................................................. 23
4.6 About AutoCut ..................................................................................................... 25
Chapter 5The usage of AutoCut control software ................................................................. 26
5.1 Interface .............................................................................................................. 26
5.2 Load process task ................................................................................................. 27
5.3 Settings ............................................................................................................... 30
5.4 Start Processing ................................................................................................... 35
5.5 Motor ................................................................................................................. 37
5.6 High-Frequency ................................................................................................... 37
5.7 Wire ................................................................................................................... 38
5.8 Pump .................................................................................................................. 38
5.9 Gapping .............................................................................................................. 38
5.10 Incising Limit Speed ........................................................................................... 39
5.11 Empty Walking Limit Speed ................................................................................ 39
5.12 Manual Function ................................................................................................ 39
5.13 Pitch Correct ...................................................................................................... 43
5.14 Servo Debug ...................................................................................................... 45
5.15 High-Frequency Settings ..................................................................................... 46
5.16 About ................................................................................................................ 47
Chapter 6Contact ............................................................................................................. 48

1
Chapter Chapter Chapter Chapter 1111TheTheTheThe Introduction Introduction Introduction Introduction ofofofof AutoCut AutoCut AutoCut AutoCut
WEDM WEDM WEDM WEDM Program Program Program Program -Control -Control -Control -Control System System System System
1.11.11.11.1 Introduction Introduction Introduction Introduction
TheTheTheThe AutoCut AutoCut AutoCut AutoCut WEDM WEDM WEDM WEDM Program-Control Program-Control Program-Control Program-Control System System System System (abbr. (abbr. (abbr. (abbr. asasasas AutoCut AutoCut AutoCut AutoCut system system system system asasasas below), below), below), below),
which which which which isisisisbased based based based onononon Windows Windows Windows Windows XPXPXPXP operation operation operation operation system, system, system, system, consists consists consists consists ofofofof system system system system software software software software (CAD (CAD (CAD (CAD andandandand
CAM) CAM) CAM) CAM) that that that that runs runs runs runs under under under under thethethethe Windows Windows Windows Windows OS,OS,OS,OS, 4444axes axes axes axes motion motion motion motion control control control control card card card card that that that that ’ssssdesigned designed designed designed totototo
fitfitfitfit inininin aaaasisisisingle ngle ngle ngle PCIPCIPCIPCI slot slot slot slot ofofofof aaaaPCPCPCPC (based (based (based (based onononon PCIPCIPCIPCI bus) bus) bus) bus) ,,,,step step step step ----motor motor motor motor driver driver driver driver circuit circuit circuit circuit board board board board ofofofof
high-reliability high-reliability high-reliability high-reliability andandandand power-saving power-saving power-saving power-saving (without (without (without (without fans), fans), fans), fans), High-Frequency High-Frequency High-Frequency High-Frequency board board board board with with with with 0.50.50.50.5
microsecond. microsecond. microsecond. microsecond.
User User User User useuseuseuse CADCADCADCAD totototo design design design design thethethethe processing processing processing processing graphics graphics graphics graphics according according according according totototo thethethethe blueprint, blueprint, blueprint, blueprint, andandandand setsetsetset
thethethethe WEDM WEDM WEDM WEDM technics technics technics technics forforforfor thethethethe CADCADCADCAD graphics, graphics, graphics, graphics, generate generate generate generate 2D2D2D2D orororor 3D3D3D3D processing processing processing processing data, data, data, data, andandandand then then then then
process process process process thethethethe spare spare spare spare parts parts parts parts production. production. production. production. During During During During thethethethe processing processing processing processing ,,,,thethethethe system system system system cancancancan control control control control
intelligently intelligently intelligently intelligently thethethethe speed speed speed speed ofofofof motor motor motor motor andandandand thethethethe parameters parameters parameters parameters ofofofof pulse pulse pulse pulse power power power power etcetcetcetc ....TheTheTheThe processing processing processing processing
method method method method which which which which isisisis based based based based onononon thethethethe graphic graphic graphic graphic drive, drive, drive, drive, isisisisthethethethe dynamic dynamic dynamic dynamic integration integration integration integration ofofofof CADCADCADCAD andandandand
CAMCAMCAMCAM inininin thethethethe WEDM WEDM WEDM WEDM field. field. field. field.
TheTheTheThe system system system system hashashashas thethethethe operation operation operation operation functions functions functions functions which which which which hashashashas auto-control auto-control auto-control auto-control ofofofof cutting cutting cutting cutting speed, speed, speed, speed,
real-time real-time real-time real-time show show show show during during during during thethethethe cutting, cutting, cutting, cutting, preview preview preview preview ofofofof processing processing processing processing etc. etc. etc. etc. AtAtAtAt thethethethe same same same same time, time, time, time, ititititcancancancan
provide provide provide provide complete complete complete complete protection protection protection protection ofofofof allallallall kinds kinds kinds kinds ofofofof emergency emergency emergency emergency (out (out (out (out ofofofof power, power, power, power, system system system system halted halted halted halted etcetcetcetc .))))
totototo avoid avoid avoid avoid rejec rejec rejec rejec ttttthethethethe workpiece workpiece workpiece workpiece ....
1.21.21.21.2 TheTheTheThe Structure Structure Structure Structure ofofofof AutoCut AutoCut AutoCut AutoCut System System System System
option option option option setting setting setting setting
WWWWindows indows indows indows XPXPXPXP
Step -motor driver
circuit board of
high-reliability and
power saving
WEDM Machine
3B code generated by
other software
AutoCut AutoCut AutoCut AutoCut Control Software
No. n
Control Card
No.1
Control Card
Auto Auto Auto Auto CADCADCADCAD Draw
graphic and Build track
NCCAD NCCAD NCCAD NCCAD Draw graphic
and Build track
CAXA CAXA CAXA CAXA Draw graphic
and Build track
Graphic Drive
High-Frequency
board with 0.5
microsecond
Expansive IO for
controlling
inverter etc.
High-Frequency Amplifier

2
AsAsAsAs above above above above figure figure figure figure show, show, show, show, AutoCut AutoCut AutoCut AutoCut system system system system isisisis oneoneoneone complete complete complete complete solution solution solution solution forforforfor WEDM WEDM WEDM WEDM ....
AutoCut AutoCut AutoCut AutoCut system system system system consist consist consist consist ofofofofAutoCut AutoCut AutoCut AutoCut system system system system software, software, software, software, motion motion motion motion control control control control card card card card that that that that ’’’’ssssbased based based based onononon
PCIPCIPCIPCI busbusbusbus ,,,,step step step step ----motor motor motor motor circuit circuit circuit circuit board board board board ofofofof high-reliability high-reliability high-reliability high-reliability andandandand power-saving power-saving power-saving power-saving (optional), (optional), (optional), (optional),
High-Frequency High-Frequency High-Frequency High-Frequency board board board board with with with with 0.50.50.50.5 microsecond microsecond microsecond microsecond andandandand sampling sampling sampling sampling board board board board ....AutoCut AutoCut AutoCut AutoCut system system system system
software software software software includes includes includes includes AutoCAD AutoCAD AutoCAD AutoCAD WEDM WEDM WEDM WEDM module, module, module, module, NCCAD NCCAD NCCAD NCCAD ((((includes includes includes includes WEDM WEDM WEDM WEDM module) module) module) module) ,,,,
AutoCut AutoCut AutoCut AutoCut plug-in plug-in plug-in plug-in ofofofof CAXA CAXA CAXA CAXA andandandand CCCControl ontrol ontrol ontrol software. software. software. software.
1.31.31.31.3 Main Main Main Main functions functions functions functions ofofofof AutoCut AutoCut AutoCut AutoCut system system system system
1、SSSSupport upport upport upport Graphic Graphic Graphic Graphic drive drive drive drive andandandand auto-program auto-program auto-program auto-program ,,,,user user user user doesn doesn doesn doesn ’’’’ttttneed need need need totototo contact contact contact contact thethethethe
code code code code ,,,,only only only only need need need need totototo setsetsetset thethethethe processing processing processing processing technics technics technics technics forforforfor thethethethe graphic graphic graphic graphic ;;;;meanwhile, meanwhile, meanwhile, meanwhile,
support support support support 3B3B3B3B andandandand GGGGcode code code code generated generated generated generated bybybyby other other other other WEDM WEDM WEDM WEDM sosososoftware; ftware; ftware; ftware;
2、TTTThehehehe software software software software cancancancan bebebebe directly directly directly directly embed embed embed embed ddddedededed into into into into allallallall versions versions versions versions ofofofofAutoCAD AutoCAD AutoCAD AutoCAD 、CAXA CAXA CAXA CAXA
etcetcetcetc ;;;;
3、AAAAllllllllkinds kinds kinds kinds ofofofof processing processing processing processing ways ways ways ways cancancancan bebebebe combined combined combined combined together together together together flexib flexib flexib flexib ility ility ility ility ((((Processing Processing Processing Processing
ways ways ways ways include include include include CCCContinuous, ontinuous, ontinuous, ontinuous, SSSSingle ingle ingle ingle segment, segment, segment, segment, Forward Forward Forward Forward ,,,,CCCConverse, onverse, onverse, onverse, RRRReverse everse everse everse etc.) etc.) etc.) etc.)
4、TTTThehehehe direction direction direction direction ofofofof XYUV XYUV XYUV XYUV 4444axes axes axes axes cancancancan bebebebe aaaaddddjustable, justable, justable, justable, thethethethe drive drive drive drive motor motor motor motor cancancancan bebebebe setsetsetset atatatat
5-phase 5-phase 5-phase 5-phase 10-bears, 10-bears, 10-bears, 10-bears, 3-phase 3-phase 3-phase 3-phase 6-beats 6-beats 6-beats 6-beats etc; etc; etc; etc;
5、RRRReal-time eal-time eal-time eal-time monitor monitor monitor monitor thethethethe processing processing processing processing status status status status ofofofof XXXXYYYYUUUUVVVV4444axis axis axis axis onononon WEDM WEDM WEDM WEDM
machine; machine; machine; machine;
6、Preview Preview Preview Preview ofofofof processing, processing, processing, processing, Real-time Real-time Real-time Real-time show show show show processing; processing; processing; processing; Taper Taper Taper Taper processing processing processing processing cancancancan bebebebe
showed showed showed showed bybybyby 3333DDDD,,,,TTTThehehehe processing processing processing processing graphic graphic graphic graphic cancancancan bebebebe amplified amplified amplified amplified orororor shortened, shortened, shortened, shortened, andandandand itititit
cancancancan bebebebe viewed viewed viewed viewed from from from from main main main main view, view, view, view, left left left left view, view, view, view, toptoptoptop view view view view etc.; etc.; etc.; etc.;
7、CCCCanananan bebebebe used used used used forforforfor thethethethe multiple-process multiple-process multiple-process multiple-process ,,,,ititititbring bring bring bring thethethethe maintainable maintainable maintainable maintainable function function function function ofofofof
technics technics technics technics library library library library ,,,,andandandand make make make make thethethethe multiple-process multiple-process multiple-process multiple-process easy easy easy easy andandandand reliable; reliable; reliable; reliable;
8、AAAAdopt dopt dopt dopt 4444axes axes axes axes linkage linkage linkage linkage control control control control technic technic technic technic totototo process process process process taper taper taper taper workpiece, workpiece, workpiece, workpiece, Process Process Process Process thethethethe
toptoptoptop andandandand bottom bottom bottom bottom shaped shaped shaped shaped taper taper taper taper conveniently conveniently conveniently conveniently ,,,,make make make make thethethethe complicated complicated complicated complicated processing processing processing processing
easy easy easy easy andandandand exactly; exactly; exactly; exactly;
9、CCCCanananan drive drive drive drive 4444axes axes axes axes motion motion motion motion control control control control card, card, card, card, working working working working stability stability stability stability andandandand credibility; credibility; credibility; credibility;
10 、SSSSupport upport upport upport multi- multi- multi- multi- cards cards cards cards parallel parallel parallel parallel work, work, work, work, oneoneoneone computer computer computer computer maymaymaymay control control control control multi- multi- multi- multi- machine machine machine machine
atatatat thethethethe same same same same time; time; time; time;
11 、Support Support Support Support auto-alarm, auto-alarm, auto-alarm, auto-alarm, system system system system will will will will alarm alarm alarm alarm when when when when thethethethe processing processing processing processing finished finished finished finished orororor
emergency, emergency, emergency, emergency, thethethethe time time time time ofofofof alarm alarm alarm alarm cancancancan bebebebe setsetsetset arbitrarily arbitrarily arbitrarily arbitrarily ;;;;
12 、SSSSupport upport upport upport time-delay time-delay time-delay time-delay forforforfor clear clear clear clear angle, angle, angle, angle, delay delay delay delay time time time time when when when when processing processing processing processing thethethethe angle angle angle angle ofofofof
thethethethe track, track, track, track, totototo make make make make perfect perfect perfect perfect forforforfor thethethethe deviation deviation deviation deviation caused caused caused caused bybybyby electrode electrode electrode electrode wire; wire; wire; wire;
13 、SSSSupport upport upport upport thethethethe gear gear gear gear clearance clearance clearance clearance compensation compensation compensation compensation ,,,,ititititcancancancan compensate compensate compensate compensate thethethethe gear gear gear gear
clearance clearance clearance clearance error error error error ofofofof thethethethe screw screw screw screw ofofofof machine machine machine machine andandandand upgrade upgrade upgrade upgrade itsitsitsits precision; precision; precision; precision;
14 、Support Support Support Support pitch pitch pitch pitch compensation: compensation: compensation: compensation: cancancancan sub-compensate sub-compensate sub-compensate sub-compensate thethethethe pitch pitch pitch pitch error error error error ofofofof
machine; machine; machine; machine;
15 、SSSSupport upport upport upport twotwotwotwo kinds kinds kinds kinds processing processing processing processing mode mode mode mode ::::normal normal normal normal HSHSHSHS mode mode mode mode ,,,,communication communication communication communication output output output output
mode mode mode mode ofofofof MSMSMSMS ;;;;
16 、SSSSaveaveaveave thethethethe processing processing processing processing status status status status automatically automatically automatically automatically when when when when power power power power off, off, off, off, continue continue continue continue totototo work work work work
when when when when power power power power onononon andandandand turn turn turn turn back back back back when when when when short-circuit short-circuit short-circuit short-circuit etc. etc. etc. etc. emergency; emergency; emergency; emergency;
17 、CutCutCutCut offoffoffoff thethethethe power power power power automatically automatically automatically automatically when when when when thethethethe processing processing processing processing isisisisfinished finished finished finished over. over. over. over.

3
1.41.41.41.4 Main Main Main Main Characteristics Characteristics Characteristics Characteristics ofofofof AutoCut AutoCut AutoCut AutoCut System System System System
1、UUUUsesesese graphic graphic graphic graphic drive drive drive drive technology, technology, technology, technology, reduce reduce reduce reduce thethethethe human human human human labor, labor, labor, labor, upgrade upgrade upgrade upgrade thethethethe efficiency efficiency efficiency efficiency ofofofof
working, working, working, working, reduce reduce reduce reduce thethethethe mistakes; mistakes; mistakes; mistakes;
2、Software Software Software Software cancancancan bebebebe runrunrunrun onononon allallallall versions versions versions versions ofofofof Windows Windows Windows Windows XPXPXPXP etc. etc. etc. etc. ,,,,simple simple simple simple totototouse, use, use, use, easy easy easy easy totototo
learn learn learn learn ;;;;
3、DDDDirectly irectly irectly irectly embed embed embed embed ddddedededed into into into into allallallall versions versions versions versions ofofofofAAAAutoCAD utoCAD utoCAD utoCAD 、CAXA CAXA CAXA CAXA ,,,,fulfill fulfill fulfill fulfill integration integration integration integration ofofofof
CAD/CAM CAD/CAM CAD/CAM CAD/CAM ,,,,expand expand expand expand thethethethe range range range range ofofofofWEDM WEDM WEDM WEDM processing processing processing processing ;;;;
4、AAAAdopt dopt dopt dopt 4444axes axes axes axes linkage linkage linkage linkage control control control control technic technic technic technic totototo process process process process taper taper taper taper workpiece; workpiece; workpiece; workpiece; Process Process Process Process track track track track
with with with with 3D3D3D3D designed; designed; designed; designed; Compensate Compensate Compensate Compensate thethethethe radius radius radius radius ofofofof guide guide guide guide wheel, wheel, wheel, wheel, thethethethe diameter diameter diameter diameter ofofofof
electrode electrode electrode electrode wire wire wire wire ,,,,thethethethe gapgapgapgap ofofofof single-side single-side single-side single-side discharge discharge discharge discharge andandandand thethethethe error error error error ofofofof large large large large cone cone cone cone
ellipse ellipse ellipse ellipse totototo eliminate eliminate eliminate eliminate thethethethe theory theory theory theory error error error error ofofofof cone cone cone cone processing; processing; processing; processing;
5、Adopt Adopt Adopt Adopt multi- multi- multi- multi- cards cards cards cards parallel parallel parallel parallel technology, technology, technology, technology, oneoneoneone computer computer computer computer cancancancan control control control control multi- multi- multi- multi- machine machine machine machine
atatatat thethethethe same same same same time; time; time; time;
6、CCCCanananan bebebebe used used used used forforforfor thethethethe multiple-process multiple-process multiple-process multiple-process ,,,,ititititbring bring bring bring thethethethe maintainable maintainable maintainable maintainable function function function function ofofofof
technics technics technics technics library library library library ,,,,CCCCanananan intelligent intelligent intelligent intelligent control control control control thethethethe speed speed speed speed andandandand thethethethe parameter parameter parameter parameter ofofofof
processing, processing, processing, processing, andandandand make make make make thethethethe multiple-process multiple-process multiple-process multiple-process easy easy easy easy andandandand reliable; reliable; reliable; reliable;
7、TheTheTheThe software software software software optimized optimized optimized optimized thethethethe processing processing processing processing ofofofof super-thick super-thick super-thick super-thick workpiece workpiece workpiece workpiece (upper (upper (upper (upper 1111
meter), meter), meter), meter), make make make make thethethethe track track track track stabile stabile stabile stabile andandandand reliable. reliable. reliable. reliable.
1.51.51.51.5 Running Running Running Running condition condition condition condition ofofofof AutoCut AutoCut AutoCut AutoCut System System System System
Computer Computer Computer Computer software software software software condition condition condition condition ::::
Win9 Win9 Win9 Win9 8888/WinMe/Win2 /WinMe/Win2 /WinMe/Win2 /WinMe/Win2 000000000000 ////Win2003/ Win2003/ Win2003/ Win2003/ WinXP WinXP WinXP WinXP Operation Operation Operation Operation System System System System ....
Computer Computer Computer Computer hardware hardware hardware hardware condition: condition: condition: condition:
LLLLowest owest owest owest scheme scheme scheme scheme ::::
Computer Computer Computer Computer ofofofof upgrade upgrade upgrade upgrade PENTIUM PENTIUM PENTIUM PENTIUM 300, 300, 300, 300, 1GB1GB1GB1GB hard hard hard hard disk, disk, disk, disk, 64MB 64MB 64MB 64MB memory memory memory memory ,,,,4M4M4M4M BBBB////16161616 bitbitbitbit
true true true true color color color color graphics graphics graphics graphics card card card card ....
RRRRecommended ecommended ecommended ecommended scheme scheme scheme scheme ::::
Computer Computer Computer Computer ofofofof upgrade upgrade upgrade upgrade PENTIUM PENTIUM PENTIUM PENTIUM 1.7G, 1.7G, 1.7G, 1.7G, 20GB 20GB 20GB 20GB hard hard hard hard disk, disk, disk, disk, 512512512512 MMMMBBBBmemory, memory, memory, memory, 4M4M4M4M BBBB/32/32/32/32
bitbitbitbit true true true true color color color color graphics graphics graphics graphics card card card card ....

4
Chapter Chapter Chapter Chapter 2222AutoCut AutoCut AutoCut AutoCut system system system system hardware hardware hardware hardware andandandand
software software software software installation installation installation installation
2.12.12.12.1 Hardware Hardware Hardware Hardware Installation Installation Installation Installation
1、 Motion control card Installation
1) BeBeBeBe sure sure sure sure thethethethe power power power power ofofofof computer computer computer computer isisisis off. off. off. off. BeBeBeBe strictly strictly strictly strictly prohibited prohibited prohibited prohibited totototo insert insert insert insert thethethethe
AutoCut AutoCut AutoCut AutoCut motion motion motion motion control control control control card card card card when when when when thethethethe power power power power ofofofof computer computer computer computer isisisison.on.on.on.
2) When When When When take take take take outoutoutout thethethethe AutoCut AutoCut AutoCut AutoCut motion motion motion motion control control control control card, card, card, card, must must must must lightly lightly lightly lightly hold hold hold hold andandandand put. put. put. put.
BeBeBeBe strictly strictly strictly strictly prohibited prohibited prohibited prohibited totototo strike strike strike strike ititititseriously seriously seriously seriously ....Avoid Avoid Avoid Avoid direct direct direct direct human human human human touch touch touch touch ICICICIC
devices devices devices devices totototo prevent prevent prevent prevent static static static static electricity electricity electricity electricity damage. damage. damage. damage.
3) Open Open Open Open thethethethe cover cover cover cover ofofofof computer, computer, computer, computer, select select select select oneoneoneone free free free free PCIPCIPCIPCI slot, slot, slot, slot, then then then then insert insert insert insert thethethethe control control control control
card card card card into into into into this this this this free free free free PCIPCIPCIPCI slot slot slot slot (Figure (Figure (Figure (Figure 2.1), 2.1), 2.1), 2.1), During During During During this this this this operation, operation, operation, operation, user user user user ’’’’ssssboth both both both
hands hands hands hands should should should should useuseuseuse thethethethe average average average average force, force, force, force, preventing preventing preventing preventing totototo damage damage damage damage computer computer computer computer ’’’’ssssPCIPCIPCIPCI
slots slots slots slots onononon thethethethe motherboard. motherboard. motherboard. motherboard.
4) EEEEnsur nsur nsur nsur eeeethat that that that thethethethe PCIPCIPCIPCI plug plug plug plug ofofofof thethethethe control control control control card card card card isisisisreliable reliable reliable reliable contact contact contact contact edededed with with with with your your your your
computer's computer's computer's computer's PCIPCIPCIPCI slot slot slot slot onononon thethethethe motherboard motherboard motherboard motherboard ,,,,then then then then useuseuseuse thethethethe sssscrew crew crew crew totototo fixfixfixfix thethethethe
control control control control card card card card onononon thethethethe computer computer computer computer ’’’’ssssbox. box. box. box.
5) CCCConfirm onfirm onfirm onfirm edededed correct correct correct correct ,,,,cover cover cover cover thethethethe boxboxboxbox cover cover cover cover ....
6) Connect Connect Connect Connect thethethethe motion motion motion motion control control control control card card card card with with with with thethethethe control control control control cable cable cable cable (DB25 (DB25 (DB25 (DB25 orororor DB15 DB15 DB15 DB15
extended extended extended extended cable). cable). cable). cable).
7) After After After After installation, installation, installation, installation, connect connect connect connect totototo thethethethe computer computer computer computer power power power power supply, supply, supply, supply, turn turn turn turn onononon thethethethe
computer computer computer computer andandandand letletletlet ititititrunning. running. running. running.
Figure 2.1
2、Hardware Hardware Hardware Hardware driver driver driver driver Installation Installation Installation Installation

5
AutoCut AutoCut AutoCut AutoCut motion motion motion motion control control control control card card card card isisisisaaaaplug plug plug plug andandandand play play play play (pnp) (pnp) (pnp) (pnp) device, device, device, device, cancancancan bebebebe runrunrunrun inininin allallallall
versions versions versions versions ofofofofWindows Windows Windows Windows Operating Operating Operating Operating System. System. System. System.
WeWeWeWe provide provide provide provide thethethethe driver driver driver driver ofofofof control control control control card card card card which which which which isisisis inininin thethethethe ‘‘‘‘driver driver driver driver ’’’’folder folder folder folder ofofofof
installation installation installation installation CD.CD.CD.CD. There There There There areareareare some some some some methods methods methods methods inininin thethethethe Windows Windows Windows Windows XPXPXPXP operating operating operating operating system system system system
howhowhowhow totototo manually manually manually manually install install install install thethethethe driver driver driver driver ofofofof control control control control card card card card ....
Control Control Control Control card card card card isisisis installed, installed, installed, installed, start start start start thethethethe computer, computer, computer, computer, then then then then thethethethe system system system system will will will will find find find find thethethethe
installation installation installation installation ofofofof newnewnewnew device device device device andandandand show show show show thethethethe "Find "Find "Find "Find NewNewNewNew Hardware Hardware Hardware Hardware Wizard" Wizard" Wizard" Wizard" ,,,,asasasas
follow: follow: follow: follow:
Click Click Click Click thethethethe ““““next next next next ””””button, button, button, button, thethethethe system system system system pop-up pop-up pop-up pop-up dialog dialog dialog dialog boxboxboxbox asasasas follow: follow: follow: follow:
Select Select Select Select thethethethe ““““InInInIn thethethethe search, search, search, search, including including including including thethethethe location location location location ””””,,,,click click click click thethethethe ““““Browse Browse Browse Browse ””””button, button, button, button, select select select select thethethethe
driver driver driver driver ’’’’ssssfolder, folder, folder, folder, then then then then click click click click thethethethe ““““next next next next ””””button, button, button, button, thethethethe system system system system pup-up pup-up pup-up pup-up dialog dialog dialog dialog boxboxboxbox asasasas follows: follows: follows: follows:

6
Click Click Click Click thethethethe ““““Browse Browse Browse Browse ””””button, button, button, button, select select select select thethethethe driver driver driver driver ’’’’ssssfolder, folder, folder, folder, click click click click thethethethe ““““OKOKOKOK ””””button. button. button. button.
Click Click Click Click thethethethe ““““Completion Completion Completion Completion ””””button, button, button, button, thethethethe driver driver driver driver ofofofof thethethethe motion motion motion motion control control control control card card card card isisisis successfully successfully successfully successfully

7
installed installed installed installed under under under under thethethethe Windows Windows Windows Windows XPXPXPXP operation operation operation operation system. system. system. system.
2.2 Software Software Software Software installation installation installation installation
1、Green Green Green Green installation installation installation installation method method method method
Copy Copy Copy Copy thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””directory directory directory directory which which which which isisisis inininin AutoCut AutoCut AutoCut AutoCut CD-ROM CD-ROM CD-ROM CD-ROM totototo thethethethe computer, computer, computer, computer,
NCCAD.exe NCCAD.exe NCCAD.exe NCCAD.exe isisisisthethethethe executable executable executable executable file file file file forforforfor NCCAD NCCAD NCCAD NCCAD software, software, software, software, WireCut.exe WireCut.exe WireCut.exe WireCut.exe isisisis thethethethe executable executable executable executable
file file file file forforforfor AutoCut AutoCut AutoCut AutoCut controlling controlling controlling controlling software. software. software. software. ForForForFor these these these these users users users users whowhowhowho need need need need totototo useuseuseuse WEDM WEDM WEDM WEDM module module module module
forforforfor AutoCAD, AutoCAD, AutoCAD, AutoCAD, will will will will runrunrunrun AutoCADSetup.EXE AutoCADSetup.EXE AutoCADSetup.EXE AutoCADSetup.EXE file, file, file, file, thethethethe following following following following dialog dialog dialog dialog will will will will bebebebe shown: shown: shown: shown:
Click Click Click Click thethethethe ““““Install Install Install Install ””””button button button button inininin different different different different versions versions versions versions ofofofofAutoCAD, AutoCAD, AutoCAD, AutoCAD, will will will will install install install install thethethethe WEDM WEDM WEDM WEDM
module module module module onononon thethethethe computer computer computer computer which which which which hashashashas been been been been installed installed installed installed AutoCAD AutoCAD AutoCAD AutoCAD software. software. software. software. """"Install Install Install Install OKOKOKOK """"
interface interface interface interface will will will will bebebebe shown shown shown shown after after after after finishing finishing finishing finishing installation. installation. installation. installation.
2.3 Uninstall Software
1、Uninstall method

8
ForForForFor users users users users whowhowhowho hadn hadn hadn hadn ’’’’ttttinstalled installed installed installed WEDM WEDM WEDM WEDM module module module module ofofofof AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, delete delete delete delete thethethethe
AutoCut AutoCut AutoCut AutoCut directory directory directory directory inininin thethethethe computer, computer, computer, computer, cancancancan completely completely completely completely uninstall. uninstall. uninstall. uninstall. IfIfIfIfusers users users users have have have have install install install install edededed thethethethe
WEDM WEDM WEDM WEDM module module module module ofofofof AutoCAD, AutoCAD, AutoCAD, AutoCAD, first first first first runrunrunrun AutoCADSetup.EXE, AutoCADSetup.EXE, AutoCADSetup.EXE, AutoCADSetup.EXE, inininin thethethethe above above above above Figure, Figure, Figure, Figure, click click click click
thethethethe """"UUUUninstall" ninstall" ninstall" ninstall" button button button button totototo complete complete complete complete thethethethe unloading unloading unloading unloading ofofofof thethethethe WEDM WEDM WEDM WEDM module module module module ,,,,then then then then delete delete delete delete thethethethe
AutoCut AutoCut AutoCut AutoCut directory directory directory directory totototo complete complete complete complete thethethethe uninstall. uninstall. uninstall. uninstall.

9
Chapter Chapter Chapter Chapter 3333TheTheTheThe usage usage usage usage ofofofof NCNCNCNC CADCADCADCAD
NCCAD NCCAD NCCAD NCCAD Drawing Drawing Drawing Drawing software software software software working working working working interface interface interface interface include include include include Menu Menu Menu Menu bar, bar, bar, bar, Toolbar, Toolbar, Toolbar, Toolbar, Drawing Drawing Drawing Drawing
Window, Window, Window, Window, Catch Catch Catch Catch bar, bar, bar, bar, Status Status Status Status bar, bar, bar, bar, Drawing Drawing Drawing Drawing area area area area andandandand command command command command window window window window etc. etc. etc. etc. (Figure3.1 (Figure3.1 (Figure3.1 (Figure3.1 ).).).).
Click Click Click Click Menu-bar Menu-bar Menu-bar Menu-bar totototo open open open open thethethethe menu, menu, menu, menu, Click Click Click Click thethethethe button button button button onononon Toolbar Toolbar Toolbar Toolbar totototo start start start start thethethethe
correspond correspond correspond correspond inginginging function. function. function. function. User User User User cancancancan find find find find thethethethe function function function function ofofofof these these these these button button button button inininin Menu-bar, Menu-bar, Menu-bar, Menu-bar, butbutbutbut thethethethe
button button button button onononon Toolbar Toolbar Toolbar Toolbar isisisisaaaashortcut. shortcut. shortcut. shortcut. When When When When user user user user moves moves moves moves thethethethe mouse mouse mouse mouse atatatat thethethethe button button button button ofofofof Toolbar, Toolbar, Toolbar, Toolbar,
thethethethe word word word word ofofofof description description description description will will will will bebebebe displayed displayed displayed displayed beside beside beside beside thethethethe button, button, button, button, andandandand more more more more detailed detailed detailed detailed
description description description description will will will will display display display display inininin Status Status Status Status bar. bar. bar. bar.
Figure Figure Figure Figure 3.13.13.13.1 NCCAD NCCAD NCCAD NCCAD main main main main interface interface interface interface
Detailed Detailed Detailed Detailed Guide Guide Guide Guide ofofofof thethethethe software software software software isisisisinininin thethethethe reference reference reference reference manual manual manual manual ofofofof thethethethe NCCAD NCCAD NCCAD NCCAD drawing drawing drawing drawing
software. software. software. software.
Toolbar
Menu
Draw Window
Osnap
Command Line

10
Chapter4 Chapter4 Chapter4 Chapter4 TheTheTheThe usage usage usage usage ofofofof AutoCut AutoCut AutoCut AutoCut ForForForFor
AutoCAD AutoCAD AutoCAD AutoCAD
WeWeWeWe provide provide provide provide thethethethe installation installation installation installation program program program program ofofofof AutoCAD AutoCAD AutoCAD AutoCAD WEDM WEDM WEDM WEDM plug plug plug plug which which which which isisisis inininin thethethethe
‘‘‘‘Autocut Autocut Autocut Autocut ’’’’folder folder folder folder ofofofof installation installation installation installation CD.CD.CD.CD. Double Double Double Double click click click click thethethethe ““““AutoCADSetup.exe AutoCADSetup.exe AutoCADSetup.exe AutoCADSetup.exe ””””file, file, file, file, then then then then
display display display display thethethethe next next next next dialog dialog dialog dialog (Figure (Figure (Figure (Figure 4.1): 4.1): 4.1): 4.1):
Figure 4.1
Install Install Install Install AutoCut AutoCut AutoCut AutoCut forforforfor AutoCAD AutoCAD AutoCAD AutoCAD 2005. 2005. 2005. 2005. After After After After installation, installation, installation, installation, open open open open thethethethe software software software software ofofofof
AutoCAD AutoCAD AutoCAD AutoCAD 2005, 2005, 2005, 2005, user user user user cancancancan seeseeseesee AutoCut AutoCut AutoCut AutoCut plug plug plug plug Menu-bar Menu-bar Menu-bar Menu-bar andandandand Toolbar Toolbar Toolbar Toolbar onononon thethethethe main main main main interface interface interface interface
ofofofofAutoCAD2005. AutoCAD2005. AutoCAD2005. AutoCAD2005.
Main Main Main Main interface interface interface interface (Figure (Figure (Figure (Figure 4.2): 4.2): 4.2): 4.2):

11
Figure Figure Figure Figure 4.2: 4.2: 4.2: 4.2: Main Main Main Main interface interface interface interface ofofofofAutoCAD2005 AutoCAD2005 AutoCAD2005 AutoCAD2005 with with with with AutoCut AutoCut AutoCut AutoCut WEDM WEDM WEDM WEDM module module module module
4.1Draw Wedm Curve
TheTheTheThe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””function function function function ofofofof AutoCut AutoCut AutoCut AutoCut ForForForFor AutoCAD, AutoCAD, AutoCAD, AutoCAD, include include include include drawing drawing drawing drawing
AAAArchimedes rchimedes rchimedes rchimedes 、CCCCycloid ycloid ycloid ycloid 、Hyperbola Hyperbola Hyperbola Hyperbola 、Involute Involute Involute Involute andandandand Parabola Parabola Parabola Parabola 、GGGGearearearear etc. etc. etc. etc.
4.1.1 Archimedes
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw Archimedes Archimedes Archimedes Archimedes ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu
under under under under thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing thethethethe Archimedes Archimedes Archimedes Archimedes spiral, spiral, spiral, spiral,
after after after after inputting inputting inputting inputting parameters parameters parameters parameters ofofofof thethethethe Archimedes Archimedes Archimedes Archimedes spiral spiral spiral spiral ,click ,click ,click ,click thethethethe ““““OKOKOKOK ””””button button button button totototo complete complete complete complete
thethethethe drawing drawing drawing drawing ofofofof thethethethe Archimedes Archimedes Archimedes Archimedes spiral; spiral; spiral; spiral; TheTheTheThe parameter parameter parameter parameter equation equation equation equation ofofofof thethethethe Archimedes Archimedes Archimedes Archimedes spiral spiral spiral spiral
isisisis
⎜
⎜
⎝
⎛
=
=
trty
trtx
sin
cos
,and ,and ,and ,and parameters parameters parameters parameters include include include include thethethethe range range range range ofofofof parameter parameter parameter parameter tttt、thethethethe value value value value ofofofof
parameter parameter parameter parameter rrrrandandandand thethethethe rotation rotation rotation rotation angle angle angle angle andandandand base-point base-point base-point base-point coordinate coordinate coordinate coordinate ofofofof thethethethe Archimedes Archimedes Archimedes Archimedes spiral spiral spiral spiral
inininin thethethethe space space space space ofofofof drawing drawing drawing drawing ....
4.1.2 Parabola
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw Parabola Parabola Parabola Parabola ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu
under under under under thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing thethethethe Parabola, Parabola, Parabola, Parabola, after after after after
inputting inputting inputting inputting parameters parameters parameters parameters ofofofof thethethethe parabola, parabola, parabola, parabola, click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo complete complete complete complete thethethethe drawing drawing drawing drawing ofofofof
parabola; parabola; parabola; parabola; thethethethe parameter parameter parameter parameter equation equation equation equation ofofofof parabola parabola parabola parabola isisisis y=k*x2, y=k*x2, y=k*x2, y=k*x2, andandandand parameters parameters parameters parameters include include include include thethethethe
range range range range ofofofof xxxxcoordinate coordinate coordinate coordinate andandandand thethethethe value value value value ofofofof coefficient coefficient coefficient coefficient k,k,k,k,inininin addition, addition, addition, addition, user user user user cancancancan setsetsetset thethethethe rotation rotation rotation rotation
andandandand parallel-move parallel-move parallel-move parallel-move ofofofof thethethethe parabola parabola parabola parabola inininin thethethethe space space space space ofofofof drawing. drawing. drawing. drawing.
4.1.3 Involute
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw Involute Involute Involute Involute ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu
under under under under thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing involute, involute, involute, involute, after after after after inputting inputting inputting inputting
parameters parameters parameters parameters ofofofof thethethethe involute, involute, involute, involute, click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo complete complete complete complete thethethethe drawing drawing drawing drawing ofofofof thethethethe

12
involute; involute; involute; involute; thethethethe parameter parameter parameter parameter equation equation equation equation ofofofof involute involute involute involute isisisis
⎜
⎜
⎝
⎛
−=
+=
)cos(sin
)sin(cos
tttry
tttrx
,,,,andandandand parameters parameters parameters parameters
include: include: include: include: base base base base circle circle circle circle radius, radius, radius, radius, unfold unfold unfold unfold angle, angle, angle, angle, andandandand rotation rotation rotation rotation angle angle angle angle ofofofof thethethethe involute involute involute involute inininin drawing drawing drawing drawing
space, space, space, space, station station station station ofofofofbase base base base circle circle circle circle center. center. center. center.
4.1.4 Hyperbola
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw Hyperbola Hyperbola Hyperbola Hyperbola ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu
under under under under thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing hyperbola, hyperbola, hyperbola, hyperbola, after after after after inputting inputting inputting inputting
parameters, parameters, parameters, parameters, click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo complete complete complete complete thethethethe drawing drawing drawing drawing ofofofof thethethethe hyperbola; hyperbola; hyperbola; hyperbola; thethethethe
parameter parameter parameter parameter equation equation equation equation ofofofof hyperbola hyperbola hyperbola hyperbola isisisis
⎜
⎜
⎝
⎛
=
=
)tan(*
)cos(/
tby
tax
,,,,andandandand parameters parameters parameters parameters include: include: include: include: a,a,a,a, b,b,b,b, thethethethe
range range range range ofofofof parameter parameter parameter parameter ttttisisisist1-t2 t1-t2 t1-t2 t1-t2 (t1<t<t2), (t1<t<t2), (t1<t<t2), (t1<t<t2), inininin addition, addition, addition, addition, users users users users cancancancan setsetsetset thethethethe rotation rotation rotation rotation angle angle angle angle ofofofof thethethethe
hyperbola hyperbola hyperbola hyperbola inininin drawing drawing drawing drawing space space space space andandandand thethethethe station station station station ofofofof base base base base point. point. point. point.
4.1.5 Cycloid
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw Cycloid Cycloid Cycloid Cycloid ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu under under under under
thethethethe ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing cycloid, cycloid, cycloid, cycloid, after after after after inputting inputting inputting inputting
parameters parameters parameters parameters ofofofof thethethethe cycloid, cycloid, cycloid, cycloid, click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo complete complete complete complete thethethethe drawing drawing drawing drawing ofofofof thethethethe cycloid; cycloid; cycloid; cycloid;
thethethethe parameter parameter parameter parameter equation equation equation equation ofofofof cycloid cycloid cycloid cycloid isisisis
⎜
⎜
⎝
⎛
−=
−=
)cos1(
)sin(
try
ttrx
,,,,andandandand parameters parameters parameters parameters include: include: include: include:
coefficient coefficient coefficient coefficient r,r,r,r,swing swing swing swing angle angle angle angle t,t,t,t,andandandand thethethethe rotation rotation rotation rotation angle angle angle angle ofofofof cycloid cycloid cycloid cycloid inininin drawing drawing drawing drawing space space space space andandandand thethethethe
station station station station ofofofof base base base base point. point. point. point.
4.1.6 Gear
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Draw Draw Draw Draw GGGGearearearear ””””onononon thethethethe ““““Draw Draw Draw Draw Wedm Wedm Wedm Wedm Curve Curve Curve Curve ””””menu menu menu menu under under under under thethethethe
““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing GGGGearearearear WWWWheel heel heel heel (Figure (Figure (Figure (Figure 4.3), 4.3), 4.3), 4.3), after after after after
inputting inputting inputting inputting parameters parameters parameters parameters andandandand browsing browsing browsing browsing thethethethe Gear, Gear, Gear, Gear, click click click click ““““OKOKOKOK ””””totototo complete complete complete complete thethethethe GGGGearearearear -W-W-W-W heel heel heel heel
drawing. drawing. drawing. drawing.
Figure 4.3:Gear

13
4.1.7 Shape Text
Execute Execute Execute Execute thethethethe command command command command ofofofof ““““Shape Shape Shape Shape Text Text Text Text ””””onononon thethethethe ““““Draw Draw Draw Draw Special Special Special Special Curve Curve Curve Curve ””””menu menu menu menu under under under under thethethethe
““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof drawing drawing drawing drawing vector vector vector vector word word word word (Figure (Figure (Figure (Figure 4.4): 4.4): 4.4): 4.4):
Figure Figure Figure Figure 4.4: 4.4: 4.4: 4.4: Vector Vector Vector Vector Word Word Word Word
Write Write Write Write letter letter letter letter inininin thethethethe ““““Text Text Text Text ””””Editor, Editor, Editor, Editor, click click click click thethethethe ““““Preview Preview Preview Preview ””””button, button, button, button, will will will will display display display display thethethethe figure figure figure figure
inininin thethethethe black black black black window window window window atatatat thethethethe dialog, dialog, dialog, dialog, click click click click thethethethe ““““Insert Insert Insert Insert ””””button, button, button, button, complete complete complete complete insert insert insert insert thethethethe vector vector vector vector
word word word word into into into into thethethethe main main main main interface. interface. interface. interface.
4.24.24.24.2 Track Track Track Track DDDDesigning esigning esigning esigning
There There There There areareareare three three three three designing designing designing designing track track track track methods methods methods methods inininin AutoCAD AutoCAD AutoCAD AutoCAD WEDM WEDM WEDM WEDM module: module: module: module: create create create create
process process process process track, track, track, track, create create create create multiple multiple multiple multiple process process process process track track track track andandandand create create create create path path path path ofofofof taper. taper. taper. taper.
4.2.1create process track
Click Click Click Click ““““Create Create Create Create process process process process track track track track ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, orororor click click click click icon icon icon icon
button, button, button, button, will will will will display display display display thethethethe dialog dialog dialog dialog (Figure (Figure (Figure (Figure 4.5), 4.5), 4.5), 4.5), these these these these areareareare parameters parameters parameters parameters ofofofof create create create create path path path path ofofofof high high high high
speed speed speed speed wire. wire. wire. wire.

14
Figure Figure Figure Figure 4.54.54.54.5 HSHSHSHS process process process process track: track: track: track: setting setting setting setting process process process process parameter parameter parameter parameter
After After After After selecting selecting selecting selecting thethethethe offset offset offset offset direction, direction, direction, direction, setting setting setting setting thethethethe offset offset offset offset value value value value andandandand parameter, parameter, parameter, parameter, click click click click thethethethe
““““OKOKOKOK ””””button. button. button. button. ““““Please Please Please Please input input input input start start start start point: point: point: point: ””””will will will will display display display display inininin thethethethe Command Command Command Command Line, Line, Line, Line, User User User User cancancancan
input input input input start start start start point point point point coordinate coordinate coordinate coordinate through through through through handing handing handing handing input input input input relative relative relative relative orororor absolute absolute absolute absolute coordinate, coordinate, coordinate, coordinate, orororor
useuseuseuse mouse mouse mouse mouse totototo click click click click mouse mouse mouse mouse left-key left-key left-key left-key forforforfor selecting selecting selecting selecting oneoneoneone point point point point atatatat thethethethe screen screen screen screen asasasas start start start start point, point, point, point,
after after after after ensure ensure ensure ensure thethethethe threading, threading, threading, threading, ““““Please Please Please Please input input input input cutcutcutcut point point point point ””””will will will will display display display display inininin thethethethe Command Command Command Command Line, Line, Line, Line,
attention, attention, attention, attention, thethethethe cutcutcutcut point point point point must must must must bebebebe atatatat thethethethe drawing drawing drawing drawing graphic, graphic, graphic, graphic, otherwise, otherwise, otherwise, otherwise, ititititisisisisinvalid, invalid, invalid, invalid, user user user user cancancancan
input input input input thethethethe cutcutcutcut point point point point coordinate coordinate coordinate coordinate through through through through handing handing handing handing input input input input orororor useuseuseuse mouse mouse mouse mouse totototo select select select select oneoneoneone point point point point asasasas
cutcutcutcut point point point point atatatat thethethethe drawing drawing drawing drawing graphic. graphic. graphic. graphic. After After After After ensure ensure ensure ensure thethethethe cutcutcutcut point, point, point, point, ““““Please Please Please Please select select select select cutcutcutcut direction direction direction direction
<Enter <Enter <Enter <Enter ====finish> finish> finish> finish> ””””(Figure (Figure (Figure (Figure 4.6): 4.6): 4.6): 4.6):
Figure Figure Figure Figure 4.6: 4.6: 4.6: 4.6: Create Create Create Create process process process process track track track track
User User User User cancancancan seeseeseesee thethethethe redredredred andandandand thethethethe green green green green arrow arrow arrow arrow alternate alternate alternate alternate conversion conversion conversion conversion atatatat thethethethe process process process process track track track track
when when when when moving moving moving moving mouse, mouse, mouse, mouse, click click click click mouse mouse mouse mouse left left left left keykeykeykey atatatat thethethethe green green green green arrow arrow arrow arrow totototo ensure ensure ensure ensure cutcutcutcut direction, direction, direction, direction, orororor
click click click click <Enter> <Enter> <Enter> <Enter> keykeykeykey totototo finish finish finish finish thethethethe selection selection selection selection ofofofof thethethethe direction direction direction direction ofofofof thethethethe processing processing processing processing track, track, track, track, track track track track ’’’’ssss
direction direction direction direction will will will will bebebebe thethethethe direction direction direction direction ofofofof thethethethe green green green green arrow. arrow. arrow. arrow.
Attention, Attention, Attention, Attention, forforforfor closed closed closed closed graphic, graphic, graphic, graphic, through through through through thethethethe above above above above process, process, process, process, user user user user cancancancan finish finish finish finish thethethethe track track track track

15
ofofofof creating. creating. creating. creating. ButButButBut forforforfor unclosed unclosed unclosed unclosed graphic, graphic, graphic, graphic, ititititisisisis different, different, different, different, after after after after thethethethe above above above above process, process, process, process, ““““please please please please
input input input input endendendend point point point point <Enter <Enter <Enter <Enter ====start start start start point> point> point> point> ””””,,,,Figure Figure Figure Figure 4.7: 4.7: 4.7: 4.7:
Figure Figure Figure Figure 4.74.74.74.7 unclosed unclosed unclosed unclosed graphic: graphic: graphic: graphic: Create Create Create Create process process process process track track track track
Handing Handing Handing Handing input input input input orororor mouse mouse mouse mouse select select select select oneoneoneone point point point point asasasas exit exit exit exit point point point point coordination, coordination, coordination, coordination, orororor click click click click thethethethe
<Enter> <Enter> <Enter> <Enter> keykeykeykey totototo complete complete complete complete selecting selecting selecting selecting exit exit exit exit point point point point (default (default (default (default asasasas exit exit exit exit point point point point andandandand threading threading threading threading point point point point isisisis
thethethethe same same same same point), point), point), point), sosososo far, far, far, far, unclosed unclosed unclosed unclosed graphic graphic graphic graphic ‘‘‘‘ssssprocess process process process track track track track isisisiscreated. created. created. created.
4.2.2 Create multiple process track
Click Click Click Click ““““Create Create Create Create multiple multiple multiple multiple process process process process track track track track ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, orororor click click click click
icon icon icon icon button, button, button, button, will will will will display display display display thethethethe dialog dialog dialog dialog ofofofof ““““Edit Edit Edit Edit process process process process path path path path ””””(Figure (Figure (Figure (Figure 4.8): 4.8): 4.8): 4.8):
Figure Figure Figure Figure 4.8: 4.8: 4.8: 4.8: Edit Edit Edit Edit thethethethe process process process process path path path path
Pause at boss start point

16
CutCutCutCut times: times: times: times: multiple multiple multiple multiple cutting cutting cutting cutting times; times; times; times;
Boss Boss Boss Boss length: length: length: length: punch punch punch punch ’’’’sssswidth, width, width, width, default: default: default: default: 1111mm;mm;mm;mm;
Offset: Offset: Offset: Offset: TheTheTheThe compensation compensation compensation compensation forforforfor molybdenum, molybdenum, molybdenum, molybdenum, thethethethe offset offset offset offset value value value value isisisis0.10.10.10.1 mmmmmmmm bybybyby default. default. default. default.
Over Over Over Over cutting: cutting: cutting: cutting: After After After After process process process process finished, finished, finished, finished, some some some some times times times times thethethethe workpiece workpiece workpiece workpiece isisisisun-detached, un-detached, un-detached, un-detached, sosososo user user user user
cancancancan setsetsetset thethethethe over-cutting over-cutting over-cutting over-cutting measure measure measure measure totototo make make make make thethethethe workpiece workpiece workpiece workpiece detachment detachment detachment detachment completely completely completely completely after after after after
processing. processing. processing. processing.
CutCutCutCut once once once once atatatat boss: boss: boss: boss: CutCutCutCut once once once once atatatat boss, boss, boss, boss, andandandand thethethethe offset offset offset offset value value value value isisisisthethethethe setting setting setting setting value; value; value; value;
Left Left Left Left offset: offset: offset: offset: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process
direction, direction, direction, direction, molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe left left left left ofofofof thethethethe workpiece workpiece workpiece workpiece contour. contour. contour. contour.
Right Right Right Right offset: offset: offset: offset: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process
direction, direction, direction, direction, molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe right right right right ofofofof thethethethe workpiece workpiece workpiece workpiece contour. contour. contour. contour.
None: None: None: None: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process direction, direction, direction, direction,
molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe position position position position ofofofof thethethethe workpiece workpiece workpiece workpiece contour contour contour contour .
Pause Pause Pause Pause atatatat boss boss boss boss start start start start point: point: point: point: ififififuser user user user need need need need pause pause pause pause before before before before processing processing processing processing boss, boss, boss, boss, ititititmust must must must bebebebe selected, selected, selected, selected,
after after after after manual manual manual manual treatment, treatment, treatment, treatment, will will will will continue continue continue continue totototo process, process, process, process, otherwise otherwise otherwise otherwise user user user user needn needn needn needn ’’’’ttttuseuseuseuse it.it.it.it.
Pause Pause Pause Pause atatatat boss boss boss boss endendendend point: point: point: point: ififififuser user user user need need need need pause pause pause pause after after after after processing processing processing processing boss, boss, boss, boss, ititititmust must must must bebebebe selected, selected, selected, selected,
after after after after manual manual manual manual treatment, treatment, treatment, treatment, will will will will continue continue continue continue totototo process, process, process, process, otherwise otherwise otherwise otherwise user user user user needn needn needn needn ’’’’ttttuseuseuseuse it.it.it.it.
Outline: Outline: Outline: Outline: Process Process Process Process outline outline outline outline figure; figure; figure; figure;
Inner Inner Inner Inner hole: hole: hole: hole: Process Process Process Process inner inner inner inner figure; figure; figure; figure;
Clear Clear Clear Clear angle: angle: angle: angle: include include include include left, left, left, left, right right right right andandandand none; none; none; none;
Click Click Click Click ““““ToToToTo Database Database Database Database ””””button, button, button, button, open open open open thethethethe expert expert expert expert database, database, database, database, Figure Figure Figure Figure 4.9: 4.9: 4.9: 4.9:
Figure Figure Figure Figure 4.9: 4.9: 4.9: 4.9: TheTheTheThe Expert Expert Expert Expert Database Database Database Database

17
InInInIn thethethethe expert expert expert expert database, database, database, database, user user user user cancancancan setsetsetset process process process process parameters parameters parameters parameters ofofofof thethethethe multiple multiple multiple multiple -cutting, -cutting, -cutting, -cutting, andandandand
cancancancan save save save save these these these these parameters parameters parameters parameters totototo thethethethe expert expert expert expert database, database, database, database, click click click click thethethethe ““““OKOKOKOK ””””button, button, button, button, current current current current
parameters parameters parameters parameters will will will will bebebebe sent sent sent sent totototo ““““Edit Edit Edit Edit process process process process path path path path ””””interface, interface, interface, interface, Figure Figure Figure Figure 4.10: 4.10: 4.10: 4.10:
Figure Figure Figure Figure 4.10: 4.10: 4.10: 4.10: Edit Edit Edit Edit process process process process path path path path
InInInIn thethethethe dialog dialog dialog dialog ofofofof ““““Edit Edit Edit Edit process process process process path path path path ””””,,,,click click click click thethethethe ““““OKOKOKOK ””””totototo finish finish finish finish thethethethe setting setting setting setting ofofofof thethethethe
multiple-cutting; multiple-cutting; multiple-cutting; multiple-cutting;
After After After After finishing finishing finishing finishing thethethethe setting setting setting setting ofofofof thethethethe process process process process parameters, parameters, parameters, parameters, ““““Please Please Please Please input input input input start start start start point point point point ””””will will will will
display display display display inininin thethethethe Command Command Command Command Line Line Line Line inininin AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, User User User User cancancancan input input input input start start start start point point point point
coordinate coordinate coordinate coordinate through through through through handing handing handing handing input input input input relative relative relative relative orororor absolute absolute absolute absolute coordinate coordinate coordinate coordinate orororor useuseuseuse mouse mouse mouse mouse totototo click click click click
left left left left keykeykeykey forforforfor selecting selecting selecting selecting oneoneoneone point point point point atatatat thethethethe screen screen screen screen asasasas start start start start point, point, point, point, after after after after ensure ensure ensure ensure thethethethe point, point, point, point, ““““Please Please Please Please
input input input input cutcutcutcut point point point point ””””will will will will display display display display inininin thethethethe Command Command Command Command Line, Line, Line, Line, attention, attention, attention, attention, thethethethe cutcutcutcut point point point point must must must must bebebebe atatatat
thethethethe drawing drawing drawing drawing graphic, graphic, graphic, graphic, otherwise, otherwise, otherwise, otherwise, ititititisisisis invalid, invalid, invalid, invalid, user user user user cancancancan input input input input thethethethe cutcutcutcut point point point point coordinate coordinate coordinate coordinate
through through through through handing handing handing handing input input input input orororor useuseuseuse mouse mouse mouse mouse totototo select select select select oneoneoneone point point point point asasasas cutcutcutcut point point point point atatatat thethethethe drawing drawing drawing drawing
graphic. graphic. graphic. graphic. After After After After ensure ensure ensure ensure thethethethe cutcutcutcut point, point, point, point, ““““Please Please Please Please select select select select cutcutcutcut direction direction direction direction <Enter= <Enter= <Enter= <Enter= finish> finish> finish> finish> ””””(just (just (just (just asasasas
create create create create process process process process track). track). track). track). User User User User cancancancan seeseeseesee thethethethe redredredred andandandand thethethethe green green green green arrow arrow arrow arrow alternate alternate alternate alternate conversion conversion conversion conversion atatatat
process process process process track track track track when when when when moving moving moving moving mouse, mouse, mouse, mouse, click click click click mouse mouse mouse mouse left left left left keykeykeykey atatatat thethethethe green green green green arrow arrow arrow arrow totototo ensure ensure ensure ensure thethethethe
cutcutcutcut direction, direction, direction, direction, orororor click click click click <Enter> <Enter> <Enter> <Enter> keykeykeykey totototo finish finish finish finish thethethethe selection selection selection selection ofofofof thethethethe direction direction direction direction ofofofof thethethethe
processing processing processing processing track, track, track, track, track track track track ’’’’ssssdirection direction direction direction will will will will bebebebe thethethethe direction direction direction direction ofofofof thethethethe green green green green arrow. arrow. arrow. arrow.
ForForForFor closed closed closed closed andandandand unclosed unclosed unclosed unclosed figure, figure, figure, figure, after after after after setting setting setting setting thethethethe process process process process parameters, parameters, parameters, parameters, other other other other parts parts parts parts
like like like like ““““Create Create Create Create process process process process track track track track ””””function. function. function. function.
4.2.3 Create Create Create Create Path Path Path Path ofofofof Taper Taper Taper Taper
There There There There areareareare twotwotwotwo created created created created methods methods methods methods ofofofof taper taper taper taper process process process process track: track: track: track: toptoptoptop andandandand bottom bottom bottom bottom shaped shaped shaped shaped taper, taper, taper, taper,
appointed appointed appointed appointed taper taper taper taper angle. angle. angle. angle.
1）Before Before Before Before create create create create toptoptoptop andandandand bottom bottom bottom bottom shaped shaped shaped shaped taper taper taper taper process process process process track, track, track, track, user user user user need need need need useuseuseuse ““““create create create create
process process process process track track track track ””””function function function function totototo create create create create twotwotwotwo process process process process tracks tracks tracks tracks about about about about toptoptoptop andandandand bottom bottom bottom bottom surface surface surface surface

18
(Figure (Figure (Figure (Figure 4.11). 4.11). 4.11). 4.11).
Figure Figure Figure Figure 4.11: 4.11: 4.11: 4.11: toptoptoptop andandandand bottom bottom bottom bottom surface surface surface surface
Click Click Click Click ““““Create Create Create Create Path Path Path Path ofofofof Taper Taper Taper Taper ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe
dialog dialog dialog dialog ““““Taper Taper Taper Taper cutting cutting cutting cutting parameter parameter parameter parameter ””””(Figure (Figure (Figure (Figure 4.12): 4.12): 4.12): 4.12):
Figure Figure Figure Figure 4.12: 4.12: 4.12: 4.12: Taper Taper Taper Taper Cutting Cutting Cutting Cutting Parameter Parameter Parameter Parameter
CutCutCutCut Times: Times: Times: Times: multiple multiple multiple multiple cutting cutting cutting cutting times; times; times; times;
Boss Boss Boss Boss Length: Length: Length: Length: punch punch punch punch ’’’’sssswidth, width, width, width, default: default: default: default: 1111mm;mm;mm;mm;
Offset: Offset: Offset: Offset: TheTheTheThe compensation compensation compensation compensation forforforfor molybdenum, molybdenum, molybdenum, molybdenum, thethethethe offset offset offset offset value value value value isisisis0.10.10.10.1 mmmmmmmm bybybyby default. default. default. default.
Left Left Left Left offset: offset: offset: offset: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process
direction, direction, direction, direction, molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe left left left left ofofofofthethethethe workpiece workpiece workpiece workpiece contour. contour. contour. contour.
Right Right Right Right offset: offset: offset: offset: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process
direction, direction, direction, direction, molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe right right right right ofofofof thethethethe workpiece workpiece workpiece workpiece contour. contour. contour. contour.
None: None: None: None: thethethethe reference reference reference reference isisisis molybdenum molybdenum molybdenum molybdenum along along along along thethethethe workpiece workpiece workpiece workpiece contour contour contour contour ‘‘‘‘ssssprocess process process process direction, direction, direction, direction,

19
molybdenum molybdenum molybdenum molybdenum position position position position located located located located atatatat thethethethe position position position position ofofofof thethethethe workpiece workpiece workpiece workpiece contour. contour. contour. contour.
Pause Pause Pause Pause atatatat boss boss boss boss start start start start point: point: point: point: ififififuser user user user need need need need pause pause pause pause before before before before processing processing processing processing step, step, step, step, ititititmust must must must bebebebe selected, selected, selected, selected, after after after after
manual manual manual manual treatment, treatment, treatment, treatment, will will will will continue continue continue continue totototo process, process, process, process, otherwise otherwise otherwise otherwise user user user user needn needn needn needn ’’’’ttttuseuseuseuse it.it.it.it.
Pause Pause Pause Pause atatatat boss boss boss boss endendendend point: point: point: point: ififififuser user user user need need need need pause pause pause pause after after after after processing processing processing processing step, step, step, step, ititititmust must must must bebebebe selected, selected, selected, selected, after after after after
manual manual manual manual treatment, treatment, treatment, treatment, will will will will continue continue continue continue totototo process, process, process, process, otherwise otherwise otherwise otherwise user user user user needn needn needn needn ’’’’ttttuseuseuseuse it.it.it.it.
Taper Taper Taper Taper settings: settings: settings: settings:
Guide Guide Guide Guide Wheel: Wheel: Wheel: Wheel: thethethethe wheel wheel wheel wheel type, type, type, type, include include include include bigbigbigbig sawyer sawyer sawyer sawyer andandandand small small small small carriage. carriage. carriage. carriage.
Distance Distance Distance Distance ofofofof upupupup andandandand down down down down guide guide guide guide wheel wheel wheel wheel (H1): (H1): (H1): (H1): thethethethe distance distance distance distance from from from from toptoptoptop totototo
bottom bottom bottom bottom guide guide guide guide wheel wheel wheel wheel ’’’’sssscircle circle circle circle center, center, center, center, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Distance Distance Distance Distance ofofofof program program program program plane plane plane plane totototo down down down down wheel wheel wheel wheel (H2): (H2): (H2): (H2): thethethethe distance distance distance distance from from from from thethethethe
bottom bottom bottom bottom guide guide guide guide wheel wheel wheel wheel ’’’’sssscircle circle circle circle center center center center totototo thethethethe worktable worktable worktable worktable (workpiece (workpiece (workpiece (workpiece bottom bottom bottom bottom
interface), interface), interface), interface), unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
TheTheTheThe height height height height ofofofof workpiece workpiece workpiece workpiece (h): (h): (h): (h): thethethethe distance distance distance distance from from from from workpiece workpiece workpiece workpiece ’’’’sssstoptoptoptop totototo
workpiece workpiece workpiece workpiece ’’’’ssssbottom bottom bottom bottom interface interface interface interface (the (the (the (the distance distance distance distance ofofofof thethethethe toptoptoptop totototo bottom bottom bottom bottom program program program program
interface); interface); interface); interface); unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm) (mm) (mm) (mm) ;;;;
TheTheTheThe radius radius radius radius ofofofof guide guide guide guide wheel wheel wheel wheel (R1): (R1): (R1): (R1): machine machine machine machine toptoptoptop guide guide guide guide wheel wheel wheel wheel radius, radius, radius, radius, unit: unit: unit: unit:
millimeter millimeter millimeter millimeter (mm) (mm) (mm) (mm) ;;;;
TopTopTopTop andandandand bottom bottom bottom bottom shaped: shaped: shaped: shaped: Need Need Need Need select select select select twotwotwotwo processing processing processing processing track track track track about about about about toptoptoptop andandandand
bottom bottom bottom bottom interface. interface. interface. interface.
Appointed Appointed Appointed Appointed taper taper taper taper angle: angle: angle: angle: after after after after appointed appointed appointed appointed taper taper taper taper angle, angle, angle, angle, only only only only need need need need totototo select select select select oneoneoneone
process process process process track, track, track, track, system system system system will will will will auto auto auto auto create create create create corresponding corresponding corresponding corresponding taper taper taper taper graphic; graphic; graphic; graphic;
Variable Variable Variable Variable cone cone cone cone ：synsynsynsyn point point point point control control control control thethethethe taper taper taper taper angle; angle; angle; angle;
Attention: Attention: Attention: Attention: thethethethe setting setting setting setting ofofofof multiple-cutting multiple-cutting multiple-cutting multiple-cutting process process process process parameters parameters parameters parameters like like like like ““““Create Create Create Create
multiple multiple multiple multiple process process process process track track track track ””””....
1111）TopTopTopTop andandandand bottom bottom bottom bottom shaped shaped shaped shaped create create create create process process process process track: track: track: track:
After After After After finishing finishing finishing finishing thethethethe setting, setting, setting, setting, click click click click thethethethe ““““OKOKOKOK ””””button, button, button, button, ““““Please Please Please Please Select Select Select Select TopTopTopTop
Interface Interface Interface Interface ””””will will will will display display display display inininin thethethethe command command command command line line line line ofofofof AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, after after after after selecting selecting selecting selecting
oneoneoneone created created created created process process process process track, track, track, track, ““““Please Please Please Please Select Select Select Select Bottom Bottom Bottom Bottom Interface Interface Interface Interface ””””will will will will display, display, display, display, then then then then select select select select
another another another another created created created created process process process process track track track track (Figure (Figure (Figure (Figure 4.13), 4.13), 4.13), 4.13), ““““Please Please Please Please Input Input Input Input aaaaNewNewNewNew Threading Threading Threading Threading
Coordinate Coordinate Coordinate Coordinate ””””,,,,User User User User cancancancan input input input input threading threading threading threading coordinate coordinate coordinate coordinate through through through through handing handing handing handing input input input input relative relative relative relative
orororor absolute absolute absolute absolute coordinate coordinate coordinate coordinate orororor useuseuseuse mouse mouse mouse mouse totototo click click click click mouse mouse mouse mouse left left left left keykeykeykey forforforfor selecting selecting selecting selecting oneoneoneone point point point point atatatat
thethethethe screen screen screen screen asasasas aaaanewnewnewnew threading threading threading threading coordinate coordinate coordinate coordinate ,,,,after after after after ensure ensure ensure ensure thethethethe threading, threading, threading, threading, created created created created figure figure figure figure
asasasas follows follows follows follows (Figure (Figure (Figure (Figure 4.14): 4.14): 4.14): 4.14):

20
Figure Figure Figure Figure 4.13 4.13 4.13 4.13 Process track Figure Figure Figure Figure 4.14Taper 4.14Taper 4.14Taper 4.14Taper process process process process track track track track
User User User User ““““3D3D3D3D dynamic dynamic dynamic dynamic watcher watcher watcher watcher ””””under under under under thethethethe ““““view view view view ””””menu, menu, menu, menu, will will will will display display display display thethethethe 3D3D3D3D effect effect effect effect
drawing drawing drawing drawing asasasas follows follows follows follows (Figure (Figure (Figure (Figure 4.15): 4.15): 4.15): 4.15):
Figure Figure Figure Figure 4.15: 4.15: 4.15: 4.15: 3D3D3D3D Effect Effect Effect Effect Drawing Drawing Drawing Drawing
2222）Appointed Appointed Appointed Appointed taper taper taper taper angle angle angle angle create create create create taper taper taper taper process process process process track: track: track: track:
After After After After finishing finishing finishing finishing thethethethe setting, setting, setting, setting, click click click click thethethethe ““““OKOKOKOK ””””button, button, button, button, ““““Please Please Please Please Select Select Select Select Bottom Bottom Bottom Bottom
Interface Interface Interface Interface ””””will will will will display display display display inininin thethethethe Command Command Command Command Line Line Line Line ofofofof AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, after after after after selecting selecting selecting selecting
oneoneoneone created created created created process process process process track track track track (Figure (Figure (Figure (Figure 4.16), 4.16), 4.16), 4.16), ““““Please Please Please Please Input Input Input Input aaaaNewNewNewNew Threading Threading Threading Threading
Coordinate Coordinate Coordinate Coordinate ””””,,,,User User User User cancancancan input input input input threading threading threading threading coordinate coordinate coordinate coordinate through through through through handing handing handing handing input input input input relative relative relative relative
orororor absolute absolute absolute absolute coordinate coordinate coordinate coordinate orororor useuseuseuse mouse mouse mouse mouse totototo click click click click mouse mouse mouse mouse left-key left-key left-key left-key forforforfor selecting selecting selecting selecting oneoneoneone point point point point atatatat
thethethethe screen screen screen screen asasasas aaaanewnewnewnew threading threading threading threading coordinate, coordinate, coordinate, coordinate, after after after after ensure ensure ensure ensure thethethethe threading, threading, threading, threading, created created created created figure figure figure figure
asasasas follows follows follows follows (Figure (Figure (Figure (Figure 4.17): 4.17): 4.17): 4.17):
Figure4.16 Process track Figure4.17 Taper process track

21
UseUseUseUse ““““3D3D3D3D dynamic dynamic dynamic dynamic watcher watcher watcher watcher ””””under under under under thethethethe ““““view view view view ””””menu, menu, menu, menu, will will will will display display display display thethethethe 3D3D3D3D effect effect effect effect
drawing drawing drawing drawing asasasas follows follows follows follows (Figure4.18): (Figure4.18): (Figure4.18): (Figure4.18):
Figure4.18 Figure4.18 Figure4.18 Figure4.18 3D3D3D3D effect effect effect effect drawing drawing drawing drawing
4.34.34.34.3 Track Track Track Track process process process process
There There There There areareareare three three three three methods methods methods methods ofofofof processing processing processing processing track track track track inininin AutoCAD AutoCAD AutoCAD AutoCAD WEDM WEDM WEDM WEDM module, module, module, module, oneoneoneone isisisis
send send send send process process process process task task task task totototo AutoCut AutoCut AutoCut AutoCut control control control control software software software software directly directly directly directly through through through through AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software,
another another another another isisisissend send send send taper taper taper taper work work work work task task task task totototo AutoCut AutoCut AutoCut AutoCut control control control control software, software, software, software, thethethethe other other other other isisisisrunrunrunrun AutoCut AutoCut AutoCut AutoCut
control control control control software software software software directly directly directly directly andandandand through through through through loading loading loading loading file file file file totototo finish finish finish finish process process process process workpiece workpiece workpiece workpiece inininin thethethethe
control control control control software. software. software. software.
4.3.1 Send Process Task
Click Click Click Click ““““Send Send Send Send Process Process Process Process Task Task Task Task ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, orororor click click click click icon icon icon icon button, button, button, button,
will will will will display display display display thethethethe follow follow follow follow dialog dialog dialog dialog ““““Select Select Select Select Card Card Card Card ””””(Figure (Figure (Figure (Figure 4.19). 4.19). 4.19). 4.19).
Figure Figure Figure Figure 4.19: 4.19: 4.19: 4.19: Select Select Select Select Card Card Card Card
Click Click Click Click thethethethe ““““NoNoNoNo 1111Card Card Card Card ””””button button button button (if(if(if(if there there there there isnisnisnisn ’’’’ttttoneoneoneone control control control control card, card, card, card, user user user user cancancancan select select select select ““““Demo Demo Demo Demo
card card card card ””””forforforfor demo demo demo demo effect) effect) effect) effect) ,,,,andandandand then then then then ““““Please Please Please Please Select Select Select Select Object Object Object Object ””””will will will will display display display display inininin thethethethe command command command command

22
line line line line ofofofof AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, useuseuseuse mouse mouse mouse mouse left left left left keykeykeykey totototo select select select select thethethethe follow follow follow follow pink pink pink pink track(Figure track(Figure track(Figure track(Figure
4.20), 4.20), 4.20), 4.20),
Figure4.20: Process Track
Click Click Click Click mouse mouse mouse mouse right right right right key, key, key, key, will will will will enter enter enter enter into into into into thethethethe control control control control interface interface interface interface asasasas follows follows follows follows (Figure (Figure (Figure (Figure 4.21): 4.21): 4.21): 4.21):
Figure Figure Figure Figure 4.21: 4.21: 4.21: 4.21: Main Main Main Main interface interface interface interface ofofofof Control Control Control Control Software Software Software Software
4.3.2 Send Taper Process Task
Click Click Click Click ““““Send Send Send Send Taper Taper Taper Taper Process Process Process Process Task Task Task Task ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe
dialog dialog dialog dialog ““““Select Select Select Select Card Card Card Card ””””....After After After After selecting selecting selecting selecting oneoneoneone card, card, card, card, select select select select oneoneoneone created created created created taper taper taper taper process process process process track, track, track, track,
click click click click mouse mouse mouse mouse right right right right key, key, key, key, andandandand then then then then send send send send thethethethe taper taper taper taper process process process process task task task task totototo thethethethe control control control control software software software software asasasas
follows follows follows follows (Figure (Figure (Figure (Figure 4.22): 4.22): 4.22): 4.22):
Figure Figure Figure Figure 4.22: 4.22: 4.22: 4.22: Taper Taper Taper Taper Process Process Process Process task task task task

23
4.3.3 RunRunRunRun Process Process Process Process program program program program
Click Click Click Click ““““RunRunRunRun Process Process Process Process Program Program Program Program ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, orororor click click click click icon icon icon icon
button, button, button, button, will will will will display display display display thethethethe dialog dialog dialog dialog ““““Select Select Select Select Card Card Card Card ””””(Figure (Figure (Figure (Figure 4.19). 4.19). 4.19). 4.19).
Click Click Click Click ““““NoNoNoNo 1111Card Card Card Card ””””button button button button (if(if(if(if there there there there isnisnisnisn ’’’’ttttoneoneoneone control control control control card, card, card, card, cancancancan select select select select ““““Demo Demo Demo Demo card card card card ””””
forforforfor demo demo demo demo effect), effect), effect), effect), will will will will enter enter enter enter into into into into thethethethe control control control control interface interface interface interface directly. directly. directly. directly.
4.44.44.44.4 Track Track Track Track Amendment Amendment Amendment Amendment
Click Click Click Click ““““Track Track Track Track Amendment Amendment Amendment Amendment ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, orororor click click click click icon icon icon icon
button, button, button, button, ““““Please Please Please Please Select Select Select Select thethethethe Process Process Process Process Track Track Track Track which which which which want want want want totototo bebebebe modified: modified: modified: modified: ””””will will will will display display display display inininin
thethethethe command command command command line line line line ofofofof AutoCAD AutoCAD AutoCAD AutoCAD software, software, software, software, when when when when aaaaprocess process process process track track track track isisisis selected, selected, selected, selected, will will will will
display display display display under under under under thethethethe interface interface interface interface (Figure (Figure (Figure (Figure 4.23). 4.23). 4.23). 4.23).
Figure Figure Figure Figure 4.23: 4.23: 4.23: 4.23: Edit Edit Edit Edit Process Process Process Process Path Path Path Path
Parameters Parameters Parameters Parameters ofofofof thethethethe dialog dialog dialog dialog isisisisthethethethe process process process process parameter parameter parameter parameter ofofofof thethethethe selected selected selected selected process process process process track, track, track, track, user user user user
cancancancan modify modify modify modify parameters parameters parameters parameters through through through through this this this this function, function, function, function, modify modify modify modify method method method method isisisisasasasas same same same same asasasas thethethethe setting setting setting setting
process process process process ofofofof ““““Create multiple process track ””””,,,,after after after after modification modification modification modification ,,,,click click click click thethethethe ““““OKOKOKOK ””””button button button button
totototo complete complete complete complete thethethethe resetting resetting resetting resetting process process process process ofofofof thethethethe process process process process track track track track parameters. parameters. parameters. parameters.
4.54.54.54.5 Technics Technics Technics Technics Library Library Library Library
Click Click Click Click ““““Maintain Maintain Maintain Maintain Process Process Process Process Library Library Library Library ””””menu menu menu menu under under under under ““““AutoCut AutoCut AutoCut AutoCut ””””menu, menu, menu, menu, will will will will display display display display thethethethe
interface interface interface interface ofofofof thethethethe ““““Expert Expert Expert Expert Database Database Database Database ””””(Figure4.24). (Figure4.24). (Figure4.24). (Figure4.24).

24
Figure4.24: Figure4.24: Figure4.24: Figure4.24: Expert Expert Expert Expert Database Database Database Database
1111）Remain Remain Remain Remain (mm): (mm): (mm): (mm): thethethethe distance distance distance distance ofofofof thethethethe twice twice twice twice cutting, cutting, cutting, cutting, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm). (mm). (mm). (mm).
2222）Pulse Pulse Pulse Pulse width width width width (microsecond): (microsecond): (microsecond): (microsecond): 0.5~250 0.5~250 0.5~250 0.5~250 microsecond; microsecond; microsecond; microsecond;
3）Pulse Pulse Pulse Pulse interval interval interval interval (pulse (pulse (pulse (pulse width width width width number): number): number): number): 1~30; 1~30; 1~30; 1~30;
4）Grouping Grouping Grouping Grouping pulse pulse pulse pulse width width width width (pulse (pulse (pulse (pulse number) number) number) number) ::::1~30; 1~30; 1~30; 1~30;
5）Grouping Grouping Grouping Grouping interval interval interval interval (times): (times): (times): (times): 1~30; 1~30; 1~30; 1~30;
6）Channel: Channel: Channel: Channel: 1~1~1~1~ 6;6;6;6;
7） SSSSilkilkilkilk speed: speed: speed: speed: 0~3; 0~3; 0~3; 0~3;
8）Voltage: Voltage: Voltage: Voltage: High High High High orororor lowlowlowlow voltage; voltage; voltage; voltage;
9）VF:VF:VF:VF: CanCanCanCan adjust adjust adjust adjust thethethethe stability stability stability stability ofofofof thethethethe track, track, track, track, thethethethe track track track track isisisisbetter better better better when when when when thethethethe value value value value isisisissmaller; smaller; smaller; smaller;
zero zero zero zero means means means means notnotnotnot set; set; set; set;
10 ）MaxMaxMaxMax Speed: Speed: Speed: Speed: thethethethe most most most most speed speed speed speed when when when when processing; processing; processing; processing; zero zero zero zero means means means means notnotnotnot set; set; set; set;
11 ）Technics Technics Technics Technics Number: Number: Number: Number: Process Process Process Process loglogloglog ’’’’ssssnumber number number number inininin thethethethe technics technics technics technics library library library library (virtual (virtual (virtual (virtual value: value: value: value:
1-3000); 1-3000); 1-3000); 1-3000);
12 ）Molybdenum Molybdenum Molybdenum Molybdenum wire wire wire wire diameter diameter diameter diameter (0.05-0.5): (0.05-0.5): (0.05-0.5): (0.05-0.5): thethethethe molybdenum molybdenum molybdenum molybdenum wire wire wire wire diameter diameter diameter diameter suitable suitable suitable suitable forforforfor
thethethethe current current current current process process process process log; log; log; log;
13 ）Workpiece Workpiece Workpiece Workpiece thickness thickness thickness thickness (0.1-2000):the (0.1-2000):the (0.1-2000):the (0.1-2000):the Workpiece Workpiece Workpiece Workpiece thickness thickness thickness thickness suitable suitable suitable suitable forforforfor thethethethe current current current current
process process process process log; log; log; log; unit: unit: unit: unit: mm;mm;mm;mm;
14 ）Molybdenum Molybdenum Molybdenum Molybdenum wire wire wire wire compensate compensate compensate compensate (0.05-0.15):the (0.05-0.15):the (0.05-0.15):the (0.05-0.15):the molybdenum molybdenum molybdenum molybdenum wire wire wire wire compensate compensate compensate compensate suitable suitable suitable suitable
forforforfor thethethethe current current current current process process process process log; log; log; log; unit: unit: unit: unit: mm;mm;mm;mm;
15 ）Shape, Shape, Shape, Shape, Inner: Inner: Inner: Inner: Shape, Shape, Shape, Shape, inner inner inner inner selection; selection; selection; selection;
16 ）Materials: Materials: Materials: Materials: Descript Descript Descript Descript thethethethe process process process process material material material material suitable suitable suitable suitable forforforfor thethethethe current current current current process process process process log. log. log. log.

25
AddAddAddAdd totototo thethethethe technics technics technics technics library: library: library: library: addaddaddadd process process process process parameters parameters parameters parameters totototo thethethethe technics technics technics technics library library library library forforforfor
using using using using them them them them atatatat next next next next processing. processing. processing. processing.
Update Update Update Update thethethethe technics technics technics technics library: library: library: library: select select select select thethethethe process process process process loglogloglog which which which which hashashashas been been been been written written written written inininin thethethethe
technics technics technics technics library library library library list, list, list, list, andandandand thethethethe process process process process parameters parameters parameters parameters ofofofof thethethethe selected selected selected selected process process process process loglogloglog will will will will bebebebe
display, display, display, display, modify modify modify modify corresponded corresponded corresponded corresponded parameters, parameters, parameters, parameters, then then then then click click click click this this this this button, button, button, button, update update update update thethethethe technics technics technics technics
library. library. library. library.
Delete Delete Delete Delete from from from from technics technics technics technics library: library: library: library: select select select select oneoneoneone process process process process loglogloglog which which which which hashashashas been been been been written written written written inininin thethethethe
technics technics technics technics library library library library list, list, list, list, click click click click this this this this button, button, button, button, will will will will delete delete delete delete thethethethe selected selected selected selected process process process process loglogloglog from from from from thethethethe
technics technics technics technics library library library library list. list. list. list.
Technics Technics Technics Technics library library library library list: list: list: list: display display display display thethethethe process process process process parameter parameter parameter parameter list list list list inininin thethethethe database. database. database. database.
4.64.64.64.6 About About About About AutoCut AutoCut AutoCut AutoCut

26
Chapter Chapter Chapter Chapter 5555TheTheTheThe usage usage usage usage ofofofof AutoCut AutoCut AutoCut AutoCut control control control control
software software software software
AutoCut AutoCut AutoCut AutoCut wire wire wire wire cutting cutting cutting cutting control control control control software, software, software, software, friendly friendly friendly friendly interface, interface, interface, interface, convenient convenient convenient convenient operation, operation, operation, operation,
general general general general worker worker worker worker cancancancan useuseuseuse itititit from?? from?? from?? from?? tentententen minutes minutes minutes minutes totototo twotwotwotwo hours hours hours hours .User .User .User .User needn needn needn needn ’’’’tttttouch touch touch touch
complicated complicated complicated complicated process process process process code code code code ,,,,just just just just need need need need draw draw draw draw thethethethe process process process process graphic graphic graphic graphic inininin CADCADCADCAD software, software, software, software, then then then then
generate generate generate generate thethethethe corresponding corresponding corresponding corresponding process process process process track, track, track, track, cancancancan process process process process thethethethe part. part. part. part. Main Main Main Main interface interface interface interface asasasas
follows follows follows follows (Figure (Figure (Figure (Figure 5.1): 5.1): 5.1): 5.1):
Figure Figure Figure Figure 5.1:Main 5.1:Main 5.1:Main 5.1:Main Interface Interface Interface Interface
5.15.15.15.1 Interface Interface Interface Interface
5.1.1 5.1.1 5.1.1 5.1.1 Language Language Language Language Selection Selection Selection Selection
Click Click Click Click mouse mouse mouse mouse left left left left keykeykeykey atatatat ““““Language Language Language Language selection selection selection selection area area area area ””””,,,,will will will will display display display display thethethethe interface interface interface interface ofofofof
Chinese Chinese Chinese Chinese ，English English English English andandandand Russian Russian Russian Russian switch switch switch switch ,,,,user user user user cancancancan finish finish finish finish thethethethe language language language language
switch switch switch switch through through through through clicking clicking clicking clicking mouse mouse mouse mouse left left left left keykeykeykey totototo select. select. select. select.
5.1.2 5.1.2 5.1.2 5.1.2 position position position position show show show show
When When When When incising incising incising incising orororor empty empty empty empty walking, walking, walking, walking, thethethethe position position position position ofofofof XXXX、YYYY、UUUU、VVVVfour four four four axes axes axes axes truly truly truly truly process process process process
Motor HF 、Wire 、Pump
Position
Time
Wave
Language Select
Graphic
Function
Parameters

27
will will will will bebebebe displayed displayed displayed displayed inininin position position position position show show show show area. area. area. area.
5.1.3 5.1.3 5.1.3 5.1.3 time time time time show show show show
When When When When processing, processing, processing, processing, ““““Used Used Used Used time time time time ””””means means means means that that that that thethethethe time time time time isisisisthat that that that hashashashas been been been been used used used used during during during during thethethethe
workpiece workpiece workpiece workpiece process, process, process, process, ““““remain remain remain remain time time time time ””””means means means means that that that that thethethethe time time time time isisisis need need need need totototo finish finish finish finish workpiece workpiece workpiece workpiece
process. process. process. process.
5.1.4 5.1.4 5.1.4 5.1.4 Graphic Graphic Graphic Graphic Show Show Show Show Area Area Area Area
When When When When incising incising incising incising orororor empty empty empty empty walking, walking, walking, walking, Graphic Graphic Graphic Graphic Show Show Show Show Area Area Area Area will will will will real-time real-time real-time real-time display display display display thethethethe
current current current current process process process process position. position. position. position.
5.1.5 5.1.5 5.1.5 5.1.5 Process Process Process Process Wave Wave Wave Wave
Process Process Process Process Wave Wave Wave Wave will will will will display display display display thethethethe speed speed speed speed andandandand thethethethe stability stability stability stability ofofofof process process process process real-time. real-time. real-time. real-time.
5.1.6 5.1.6 5.1.6 5.1.6 Process Process Process Process Parameter Parameter Parameter Parameter
Real-time Real-time Real-time Real-time display display display display thethethethe current current current current process process process process parameters parameters parameters parameters ::::pulse pulse pulse pulse width width width width 、pulse pulse pulse pulse distance distance distance distance 、
grouping grouping grouping grouping pulse pulse pulse pulse width width width width 、grouping grouping grouping grouping distance distance distance distance 、silk silk silk silk speed speed speed speed etc. etc. etc. etc.
5.1.7 5.1.7 5.1.7 5.1.7 Step Step Step Step Motion Motion Motion Motion Show Show Show Show
Real-time Real-time Real-time Real-time display display display display thethethethe step step step step motion motion motion motion isisisislocked locked locked locked orororor not. not. not. not.
5.1.8 5.1.8 5.1.8 5.1.8 High High High High Frequency Frequency Frequency Frequency 、Move-Threading Move-Threading Move-Threading Move-Threading 、Water Water Water Water Pump Pump Pump Pump Show Show Show Show
Real-time Real-time Real-time Real-time display display display display thethethethe high high high high frequency frequency frequency frequency 、move-threading move-threading move-threading move-threading 、water water water water pump pump pump pump areareareare open open open open orororor not. not. not. not.
5.1.9 5.1.9 5.1.9 5.1.9 Function Function Function Function
Function Function Function Function area area area area include include include include open open open open file, file, file, file, start start start start process, process, process, process, motion, motion, motion, motion, high high high high frequency, frequency, frequency, frequency, gap, gap, gap, gap, incising incising incising incising
limit limit limit limit speed, speed, speed, speed, empty-walking empty-walking empty-walking empty-walking limit limit limit limit speed, speed, speed, speed, settings, settings, settings, settings, manual, manual, manual, manual, about about about about etc. etc. etc. etc.
5.25.25.25.2 Load Load Load Load process process process process task task task task
5.2.1 CADCADCADCAD Graphics Graphics Graphics Graphics Drive Drive Drive Drive
UseUseUseUse ““““Send Send Send Send Process Process Process Process Task Task Task Task ””””command command command command inininin AutoCAD AutoCAD AutoCAD AutoCAD orororor NCCAD NCCAD NCCAD NCCAD software, software, software, software, send send send send thethethethe
process process process process track track track track totototo thethethethe control control control control software, software, software, software, user user user user whowhowhowho needn needn needn needn ’’’’tttttouch touch touch touch thethethethe code, code, code, code, cancancancan process process process process thethethethe
workpiece. workpiece. workpiece. workpiece.
5.2.2 Load File
Click Click Click Click thethethethe ““““Open Open Open Open File File File File ””””button button button button inininin control control control control software software software software orororor useuseuseuse shortcut shortcut shortcut shortcut keykeykeykey ““““F2F2F2F2 ””””orororor click click click click
mouse mouse mouse mouse right right right right keykeykeykey onononon thethethethe ““““Open Open Open Open File File File File ””””button button button button ,will ,will ,will ,will display display display display thethethethe pull-down pull-down pull-down pull-down menu menu menu menu
,,,,select select select select ““““Open Open Open Open File File File File ””””,,,,will will will will display display display display thethethethe follow follow follow follow dialog dialog dialog dialog (Figure5.2), (Figure5.2), (Figure5.2), (Figure5.2), select select select select
anyanyanyany file file file file type type type type inininin ““““file file file file type type type type ””””,,,,then then then then select select select select thethethethe file file file file that that that that will will will will bebebebe processed, processed, processed, processed, open open open open ititititandandandand start start start start
processing, processing, processing, processing, (ISO-G (ISO-G (ISO-G (ISO-G Code Code Code Code 、AutoCut AutoCut AutoCut AutoCut Task Task Task Task areareareare thethethethe process process process process file file file file generated generated generated generated bybybyby NCCAD, NCCAD, NCCAD, NCCAD,
3B3B3B3B Code Code Code Code isisisisgenerated generated generated generated bybybyby CAXA CAXA CAXA CAXA etcetcetcetc other other other other drawing drawing drawing drawing software); software); software); software);

28
Figure5.2: Figure5.2: Figure5.2: Figure5.2: Open Open Open Open File File File File
5.2.3 Load Load Load Load Template Template Template Template
Click Click Click Click ““““Open Open Open Open File File File File ””””button button button button inininin control control control control software, software, software, software, will will will will display display display display thethethethe pull-down pull-down pull-down pull-down menu menu menu menu
,,,,select select select select ““““Open Open Open Open Template Template Template Template ””””,,,,will will will will display display display display thethethethe follow follow follow follow dialog dialog dialog dialog (Figure (Figure (Figure (Figure 5.3): 5.3): 5.3): 5.3):
Figure Figure Figure Figure 5.3: 5.3: 5.3: 5.3: Template-Line Template-Line Template-Line Template-Line
Line Line Line Line (Figure (Figure (Figure (Figure 5.3) 5.3) 5.3) 5.3)
XXXXaxis axis axis axis distance: distance: distance: distance: thethethethe XXXXaxis axis axis axis distance distance distance distance which which which which need need need need process, process, process, process, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
YYYYaxis axis axis axis distance: distance: distance: distance: thethethethe YYYYaxis axis axis axis distance distance distance distance which which which which need need need need process, process, process, process, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);

29
Figure Figure Figure Figure 5.4: 5.4: 5.4: 5.4: Template-Rectangle Template-Rectangle Template-Rectangle Template-Rectangle
Rectangle Rectangle Rectangle Rectangle (Figure (Figure (Figure (Figure 5.4) 5.4) 5.4) 5.4)
Rectangle Rectangle Rectangle Rectangle width: width: width: width: thethethethe rectangle rectangle rectangle rectangle width width width width which which which which need need need need process, process, process, process, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Rectangle Rectangle Rectangle Rectangle height: height: height: height: thethethethe rectangle rectangle rectangle rectangle height height height height which which which which need need need need process, process, process, process, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Lead Lead Lead Lead Length: Length: Length: Length: thethethethe length length length length ofofofof thethethethe lead lead lead lead inininin ofofofof thethethethe rectangle rectangle rectangle rectangle which which which which need need need need process, process, process, process, unit: unit: unit: unit:
millimeter millimeter millimeter millimeter (mm) (mm) (mm) (mm) ;;;;
Outside Outside Outside Outside outline: outline: outline: outline: means means means means that that that that isisisisoutside outside outside outside outline outline outline outline need need need need process, process, process, process, leadin leadin leadin leadin lielielielie totototo thethethethe outside outside outside outside
ofofofof rectangle rectangle rectangle rectangle which which which which need need need need process; process; process; process;
Inner Inner Inner Inner hole: hole: hole: hole: means means means means that that that that isisisisinner inner inner inner hole hole hole hole need need need need process, process, process, process, leadin leadin leadin leadin lielielielie totototo thethethethe inside inside inside inside ofofofof rectangle rectangle rectangle rectangle
which which which which need need need need process; process; process; process;
Leadin Leadin Leadin Leadin direction: direction: direction: direction: thethethethe direction direction direction direction ofofofof thethethethe leadin, leadin, leadin, leadin, hashashashas eight eight eight eight types: types: types: types:
Figure Figure Figure Figure 5.5: 5.5: 5.5: 5.5: Template-Circle Template-Circle Template-Circle Template-Circle

30
Circle Circle Circle Circle (Figure Figure Figure Figure 5.55.55.55.5 )
Circle Circle Circle Circle radius: radius: radius: radius: thethethethe radius radius radius radius ofofofof thethethethe circle circle circle circle which which which which need need need need process, process, process, process, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Leadin: Leadin: Leadin: Leadin: thethethethe length length length length ofofofof thethethethe leadin leadin leadin leadin ofofofof thethethethe circle circle circle circle which which which which need need need need process process process process ,,,,unit unit unit unit :millimeter :millimeter :millimeter :millimeter
(mm) (mm) (mm) (mm) ;;;;
Outside Outside Outside Outside outline: outline: outline: outline: means means means means that that that that isisisisoutside outside outside outside outline outline outline outline need need need need process, process, process, process, leadin leadin leadin leadin lielielielie totototo thethethethe outside outside outside outside
ofofofof circle circle circle circle which which which which need need need need process; process; process; process;
Inner Inner Inner Inner hole: hole: hole: hole: means means means means that that that that isisisis inner inner inner inner hole hole hole hole need need need need process, process, process, process, leadin leadin leadin leadin lielielielie totototo thethethethe inside inside inside inside ofofofof circle circle circle circle
which which which which need need need need process process process process ;;;;
Leadin Leadin Leadin Leadin direction: direction: direction: direction: thethethethe direction direction direction direction ofofofof thethethethe leadin, leadin, leadin, leadin, hashashashas eight eight eight eight types: types: types: types:
Figure Figure Figure Figure 5.6: 5.6: 5.6: 5.6: Template-Snaky Template-Snaky Template-Snaky Template-Snaky Line Line Line Line
Snaky Snaky Snaky Snaky Line Line Line Line (Figure (Figure (Figure (Figure 5.6) 5.6) 5.6) 5.6)
Step Step Step Step Direction: Direction: Direction: Direction: XXXXforward, forward, forward, forward, XXXXbackward, backward, backward, backward, YYYYforward, forward, forward, forward, YYYYbackward backward backward backward four four four four direction; direction; direction; direction;
Height Height Height Height a:a:a:a: thethethethe height height height height ofofofof thethethethe snaky snaky snaky snaky line, line, line, line, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Single Single Single Single width width width width b:b:b:b: thethethethe single single single single track track track track width width width width ofofofofthethethethe snaky snaky snaky snaky line, line, line, line, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Curve Curve Curve Curve times times times times n:n:n:n: thethethethe curve curve curve curve times times times times ofofofof thethethethe snaky snaky snaky snaky line; line; line; line;
Left-Right Left-Right Left-Right Left-Right Mirror: Mirror: Mirror: Mirror: mirror mirror mirror mirror thethethethe current current current current snaky snaky snaky snaky line line line line from from from from left left left left (right) (right) (right) (right) totototo right right right right (or(or(or(or left); left); left); left);
5.35.35.35.3 Settings Settings Settings Settings
Settings Settings Settings Settings interface interface interface interface asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.7): 5.7): 5.7): 5.7): include include include include motion motion motion motion settings, settings, settings, settings, process process process process settings, settings, settings, settings,
high-frequency high-frequency high-frequency high-frequency settings, settings, settings, settings, encode encode encode encode settings, settings, settings, settings, startup startup startup startup picture picture picture picture settings settings settings settings andandandand system system system system about about about about etc: etc: etc: etc:
1） Motor Motor Motor Motor (Figure (Figure (Figure (Figure 5.7) 5.7) 5.7) 5.7)

31
Figure Figure Figure Figure 5.7: 5.7: 5.7: 5.7: Setting-Motor Setting-Motor Setting-Motor Setting-Motor
Stepper Stepper Stepper Stepper Motor Motor Motor Motor Direction: Direction: Direction: Direction:
X-Reverser: X-Reverser: X-Reverser: X-Reverser: after after after after select select select select it,it,it,it, will will will will reverse reverse reverse reverse thethethethe walk walk walk walk direction direction direction direction ofofofof XXXXaxis axis axis axis stepper stepper stepper stepper
motor; motor; motor; motor;
Y-Reverser: Y-Reverser: Y-Reverser: Y-Reverser: after after after after select select select select it,it,it,it, will will will will reverse reverse reverse reverse thethethethe walk walk walk walk direction direction direction direction ofofofof YYYYaxis axis axis axis stepper stepper stepper stepper
motor; motor; motor; motor;
U-Reverser: U-Reverser: U-Reverser: U-Reverser: after after after after select select select select it,it,it,it, will will will will reverse reverse reverse reverse thethethethe walk walk walk walk direction direction direction direction ofofofof UUUUaxis axis axis axis stepper stepper stepper stepper
motor; motor; motor; motor;
V-Reverser: V-Reverser: V-Reverser: V-Reverser: after after after after select select select select it,it,it,it, will will will will reverse reverse reverse reverse thethethethe walk walk walk walk direction direction direction direction ofofofof VVVVaxis axis axis axis stepper stepper stepper stepper
motor; motor; motor; motor;
XYXYXYXY Axes Axes Axes Axes Drive Drive Drive Drive Types: Types: Types: Types:
5-phase 5-phase 5-phase 5-phase 10-beats: 10-beats: 10-beats: 10-beats: After After After After selected, selected, selected, selected, 5-phase 5-phase 5-phase 5-phase stepper stepper stepper stepper motor motor motor motor work work work work with with with with 5-phase 5-phase 5-phase 5-phase
10-beats 10-beats 10-beats 10-beats mode; mode; mode; mode;
3-phase 3-phase 3-phase 3-phase 6-beats: 6-beats: 6-beats: 6-beats: After After After After selected, selected, selected, selected, 3-phase 3-phase 3-phase 3-phase stepper stepper stepper stepper motor motor motor motor work work work work with with with with 3-phase 3-phase 3-phase 3-phase
6-beats 6-beats 6-beats 6-beats mode; mode; mode; mode;
Drive Drive Drive Drive Distribute Distribute Distribute Distribute Pulse Pulse Pulse Pulse Sequence: Sequence: Sequence: Sequence: After After After After selected, selected, selected, selected, Control Control Control Control card card card card export export export export pulse pulse pulse pulse
andandandand direction direction direction direction signal, signal, signal, signal, this this this this selection selection selection selection isisisisused used used used forforforfor thethethethe servo servo servo servo motor motor motor motor asasasas usually; usually; usually; usually;
UVUVUVUV Axes Axes Axes Axes Drive Drive Drive Drive Types Types Types Types ::::
3-phase 3-phase 3-phase 3-phase 6-beats: 6-beats: 6-beats: 6-beats: After After After After selected, selected, selected, selected, 3-phase 3-phase 3-phase 3-phase stepper stepper stepper stepper motor motor motor motor work work work work with with with with 3-phase 3-phase 3-phase 3-phase
6-beats 6-beats 6-beats 6-beats mode; mode; mode; mode;
Close Close Close Close UVUVUVUV axes axes axes axes stepper stepper stepper stepper motor: motor: motor: motor: After After After After selected, selected, selected, selected, will will will will notnotnotnot useuseuseuse UVUVUVUV axis axis axis axis stepper stepper stepper stepper
motor; motor; motor; motor;
2222） Processing Processing Processing Processing (Figure (Figure (Figure (Figure 5.8): 5.8): 5.8): 5.8):

32
Figure Figure Figure Figure 5.8: 5.8: 5.8: 5.8: Setting-Processing Setting-Processing Setting-Processing Setting-Processing
Processing Processing Processing Processing Parameters: Parameters: Parameters: Parameters:
Short-circuit Short-circuit Short-circuit Short-circuit check-wait check-wait check-wait check-wait time: time: time: time: thethethethe time time time time ofofofof checking checking checking checking short-circuit short-circuit short-circuit short-circuit when when when when
Processing, Processing, Processing, Processing, unit: unit: unit: unit: second; second; second; second;
Clearing Clearing Clearing Clearing corner corner corner corner delay delay delay delay time: time: time: time: thethethethe time time time time isisisisthethethethe pause pause pause pause time time time time atatatat thethethethe corner corner corner corner when when when when
process process process process totototo thethethethe corner; corner; corner; corner;
Short-circuit Short-circuit Short-circuit Short-circuit auto-back: auto-back: auto-back: auto-back: Short Short Short Short circuit circuit circuit circuit when when when when processing, processing, processing, processing, thethethethe step step step step ofofofof thethethethe system system system system
auto-back, auto-back, auto-back, auto-back, unit: unit: unit: unit: step; step; step; step;
Limit Limit Limit Limit Speed: Speed: Speed: Speed:
Empty Empty Empty Empty walking walking walking walking limit limit limit limit speed: speed: speed: speed: thethethethe most most most most runrunrunrun speed speed speed speed when when when when empty empty empty empty walking, walking, walking, walking, unit: unit: unit: unit:
step step step step perperperper second second second second (Hz); (Hz); (Hz); (Hz);
Incising Incising Incising Incising limit limit limit limit speed: speed: speed: speed: thethethethe most most most most runrunrunrun speed speed speed speed ofofofof thethethethe motor motor motor motor when when when when Incising, Incising, Incising, Incising, unit: unit: unit: unit:
step step step step perperperper second second second second (Hz); (Hz); (Hz); (Hz);
Tooth Tooth Tooth Tooth Compensation: Compensation: Compensation: Compensation:
XXXXaxis axis axis axis compensation compensation compensation compensation value: value: value: value: thethethethe tooth tooth tooth tooth compensation compensation compensation compensation ofofofof XXXXaxis axis axis axis compensation compensation compensation compensation
value, value, value, value, unit unit unit unit ::::micrometer micrometer micrometer micrometer (um); (um); (um); (um);
YYYYaxis axis axis axis compensation compensation compensation compensation value: value: value: value: thethethethe tooth tooth tooth tooth compensation compensation compensation compensation ofofofof YYYYaxis axis axis axis compensation compensation compensation compensation
value, value, value, value, unit unit unit unit ::::micrometer micrometer micrometer micrometer (um); (um); (um); (um);
Process Process Process Process thickness thickness thickness thickness (used (used (used (used totototo calculate calculate calculate calculate efficiency): efficiency): efficiency): efficiency): input input input input thethethethe real real real real workpiece workpiece workpiece workpiece
thickness, thickness, thickness, thickness, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
3）High-Frequency High-Frequency High-Frequency High-Frequency (Figure (Figure (Figure (Figure 5.9): 5.9): 5.9): 5.9):

33
Figure Figure Figure Figure 5.9: 5.9: 5.9: 5.9: Setting-High-Frequency Setting-High-Frequency Setting-High-Frequency Setting-High-Frequency
High-Frequency High-Frequency High-Frequency High-Frequency Types: Types: Types: Types:
HS-WEDM: HS-WEDM: HS-WEDM: HS-WEDM: common common common common HS-WEDM HS-WEDM HS-WEDM HS-WEDM High-Frenqucy; High-Frenqucy; High-Frenqucy; High-Frenqucy;
MS-WEDM: MS-WEDM: MS-WEDM: MS-WEDM: 3Bit-Encoder; 3Bit-Encoder; 3Bit-Encoder; 3Bit-Encoder;
MS-WEDM: MS-WEDM: MS-WEDM: MS-WEDM: AutoCut AutoCut AutoCut AutoCut Compatible Compatible Compatible Compatible Power; Power; Power; Power;
MS-WEDM:AutoCut MS-WEDM:AutoCut MS-WEDM:AutoCut MS-WEDM:AutoCut Intelligent Intelligent Intelligent Intelligent Power Power Power Power ++++Silk-Motor-Controller; Silk-Motor-Controller; Silk-Motor-Controller; Silk-Motor-Controller;
4）Encoder Encoder Encoder Encoder (Figure (Figure (Figure (Figure 5.10): 5.10): 5.10): 5.10):
Figure Figure Figure Figure 5.10: 5.10: 5.10: 5.10: Setting-Encoder Setting-Encoder Setting-Encoder Setting-Encoder
Settings: Settings: Settings: Settings:
Enable Enable Enable Enable XXXXandandandand YYYYEncoder Encoder Encoder Encoder detect: detect: detect: detect: CanCanCanCan link link link link circle circle circle circle encoder encoder encoder encoder orororor linear linear linear linear encoder; encoder; encoder; encoder;
Enable Enable Enable Enable XXXXandandandand YYYYpitch pitch pitch pitch correct: correct: correct: correct: After After After After selected, selected, selected, selected, CanCanCanCan modify modify modify modify thethethethe pitch pitch pitch pitch error error error error ofofofof

34
thethethethe lead lead lead lead screw, screw, screw, screw, this this this this function function function function need need need need input input input input thethethethe table table table table ofofofof pitch pitch pitch pitch error; error; error; error;
XXXXEncoder Encoder Encoder Encoder reverser: reverser: reverser: reverser: After After After After selected selected selected selected it,it,it,it, will will will will reverse reverse reverse reverse thethethethe detected detected detected detected direction direction direction direction ofofofof
XXXXfeedback feedback feedback feedback signal; signal; signal; signal;
YYYYEncoder Encoder Encoder Encoder reversing: reversing: reversing: reversing: After After After After selected selected selected selected it,it,it,it, will will will will reverse reverse reverse reverse thethethethe detected detected detected detected direction direction direction direction ofofofof
YYYYfeedback feedback feedback feedback signal; signal; signal; signal;
Discrimination: Discrimination: Discrimination: Discrimination: cancancancan support support support support thethethethe circle circle circle circle orororor linear linear linear linear encoder encoder encoder encoder which which which which
discrimination discrimination discrimination discrimination isisisis1um1um1um1um 、5555umumumum 、0.50.50.50.5 umumumum 、0.25 0.25 0.25 0.25 umumumum 、0.40.40.40.4 umumumum 、4444um;um;um;um;
Attention: Attention: Attention: Attention: this this this this function function function function cancancancan useuseuseuse when when when when thethethethe circle circle circle circle orororor linear linear linear linear encoder encoder encoder encoder hashashashas been been been been
installed installed installed installed onononon thethethethe machine, machine, machine, machine, andandandand they they they they must must must must bebebebe link link link link totototoAutoCut AutoCut AutoCut AutoCut pitch pitch pitch pitch correct correct correct correct card. card. card. card.
5）About About About About (Figure (Figure (Figure (Figure 5.11) 5.11) 5.11) 5.11)
Figure Figure Figure Figure 5.11: 5.11: 5.11: 5.11: Setting-About Setting-About Setting-About Setting-About
About About About About meet meet meet meet with with with with 5.16. 5.16. 5.16. 5.16.
6）Startup Startup Startup Startup picture picture picture picture (Figure (Figure (Figure (Figure 5.12): 5.12): 5.12): 5.12): Control Control Control Control software software software software cancancancan display display display display thethethethe franchiser franchiser franchiser franchiser picture picture picture picture
asasasas startup startup startup startup picture picture picture picture when when when when running running running running thethethethe software, software, software, software, Display Display Display Display types types types types include: include: include: include: notnotnotnot display, display, display, display, auto auto auto auto
close close close close after after after after display display display display thethethethe setsetsetset time, time, time, time, continue continue continue continue display display display display until until until until manual manual manual manual close close close close it.it.it.it.

35
Figure Figure Figure Figure 5.11: 5.11: 5.11: 5.11: Setting-Startup Setting-Startup Setting-Startup Setting-Startup Picture Picture Picture Picture
Hand Hand Hand Hand Wheel: Wheel: Wheel: Wheel: include include include include none, none, none, none, Hand Hand Hand Hand Wheel Wheel Wheel Wheel andandandand Hand Hand Hand Hand Box; Box; Box; Box;
5.45.45.45.4 Start Start Start Start Processing Processing Processing Processing
Figure Figure Figure Figure 5.12: 5.12: 5.12: 5.12: Start Start Start Start Processing Processing Processing Processing
1111）Start: Start: Start: Start:
Start: Start: Start: Start: Start Start Start Start processing; processing; processing; processing;
Stop: Stop: Stop: Stop: Stop Stop Stop Stop thethethethe current current current current Processing; Processing; Processing; Processing;
Attention: Attention: Attention: Attention: user user user user cancancancan nnnn’’’’ttttexit exit exit exit program program program program when when when when processing, processing, processing, processing, must must must must pause pause pause pause orororor

36
stop stop stop stop thethethethe current current current current process process process process atatatat first, first, first, first, then then then then cancancancan exit exit exit exit thethethethe program; program; program; program;
2222）Start Start Start Start Mode: Mode: Mode: Mode:
Start Start Start Start (Pulse (Pulse (Pulse (Pulse Power Power Power Power On): On): On): On): Open Open Open Open High-Frequency High-Frequency High-Frequency High-Frequency pulse pulse pulse pulse power, power, power, power, Incising; Incising; Incising; Incising;
Start Start Start Start (Pulse (Pulse (Pulse (Pulse Power Power Power Power Off): Off): Off): Off): NotNotNotNot open open open open High-Frequency High-Frequency High-Frequency High-Frequency pulse pulse pulse pulse power, power, power, power,
machine machine machine machine empty empty empty empty move; move; move; move;
BBBBackackackack (Pulse (Pulse (Pulse (Pulse Power Power Power Power On): On): On): On): Open Open Open Open high-frequency high-frequency high-frequency high-frequency pulse pulse pulse pulse power, power, power, power, back back back back move move move move
specify specify specify specify steps steps steps steps (the (the (the (the specify specify specify specify steps steps steps steps cancancancan bebebebe setsetsetset inininin thethethethe settings settings settings settings interface); interface); interface); interface);
3333）Start Start Start Start Direction: Direction: Direction: Direction:
Forward: Forward: Forward: Forward: Incising Incising Incising Incising direction direction direction direction isisisis same same same same asasasas thethethethe direction direction direction direction ofofofof processing processing processing processing
track; track; track; track;
Backward: Backward: Backward: Backward: Incising Incising Incising Incising direction direction direction direction isisisisconverse converse converse converse asasasas thethethethe direction direction direction direction ofofofof processing processing processing processing
track; track; track; track;
4444）Pause Pause Pause Pause atatatat thethethethe endendendend ofofofof segment: segment: segment: segment:
NoNoNoNo Pause: Pause: Pause: Pause: Stop Stop Stop Stop after after after after finishing finishing finishing finishing thethethethe whole whole whole whole processing; processing; processing; processing;
Pause: Pause: Pause: Pause: Pause Pause Pause Pause after after after after finishing finishing finishing finishing oneoneoneone line line line line orororor circle, circle, circle, circle, wait wait wait wait user user user user totototo deal deal deal deal with; with; with; with;
5555）Other: Other: Other: Other:
Start Start Start Start Position: Position: Position: Position: click click click click ““““GoGoGoGo totototo””””button, button, button, button, display display display display thethethethe pop-up pop-up pop-up pop-up menu menu menu menu
;
Select Select Select Select ““““Start Start Start Start From From From From thethethethe First First First First segment segment segment segment ””””::::setsetsetset thethethethe start start start start point point point point ofofofof thethethethe first first first first
segment segment segment segment asasasas thethethethe start start start start point; point; point; point;
Select Select Select Select ““““Start Start Start Start From From From From thethethethe ‘‘‘‘NNNN’’’’segment segment segment segment ””””::::
Input Input Input Input oneoneoneone value value value value (in(in(in(in
virtual virtual virtual virtual value) value) value) value) totototo setsetsetset thethethethe thethethethe start start start start point point point point ofofofof thethethethe ‘‘‘‘NNNN’’’’segment segment segment segment asasasas start start start start point; point; point; point;
Select Select Select Select ““““Start Start Start Start Point Point Point Point From From From From thethethethe Last Last Last Last Segment Segment Segment Segment ””””::::setsetsetset thethethethe start start start start point point point point ofofofof thethethethe last last last last
segment segment segment segment asasasas thethethethe start start start start point; point; point; point;
Select Select Select Select ““““Start Start Start Start Point Point Point Point isisisisSpecial Special Special Special Steps Steps Steps Steps ””””::::

37
Input Input Input Input aaaaspecial special special special step step step step
(in(in(in(in virtual virtual virtual virtual value) value) value) value) totototo setsetsetset thethethethe specify specify specify specify steps steps steps steps asasasas start start start start point; point; point; point;
Pause Pause Pause Pause Position: Position: Position: Position: click click click click ““““Location Location Location Location ””””button, button, button, button, display display display display thethethethe pop-up pop-up pop-up pop-up menu menu menu menu
,,,,usage usage usage usage isisisis same same same same asasasas thethethethe function function function function ofofofof
““““Relocation Relocation Relocation Relocation Start Start Start Start Point Point Point Point ””””;;;;
After After After After finishing finishing finishing finishing thethethethe above above above above selection, selection, selection, selection, click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo start start start start processing, processing, processing, processing, thethethethe
originally originally originally originally ““““Start Start Start Start Process Process Process Process ””””button button button button will will will will display display display display ““““Pause Pause Pause Pause Process Process Process Process ””””,,,,user user user user cancancancan click click click click thethethethe
button button button button when when when when need need need need pause pause pause pause thethethethe processing, processing, processing, processing, thethethethe above above above above dialog dialog dialog dialog (Figure (Figure (Figure (Figure 5.12) 5.12) 5.12) 5.12) will will will will bebebebe displayed displayed displayed displayed
forforforfor user user user user totototo deal deal deal deal with with with with corresponding corresponding corresponding corresponding things. things. things. things.
5.55.55.55.5 Motor Motor Motor Motor
This This This This command command command command isisisisused used used used totototo lock lock lock lock orororor unlock unlock unlock unlock thethethethe motor, motor, motor, motor, when when when when thethethethe motor motor motor motor
isisisislocked, locked, locked, locked, thethethethe main main main main interface interface interface interface will will will will display display display display with with with with thethethethe green green green green light light light light asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.13), 5.13), 5.13), 5.13),
otherwise otherwise otherwise otherwise will will will will display display display display thethethethe gray gray gray gray light. light. light. light.
Figure Figure Figure Figure 5.13: 5.13: 5.13: 5.13: Motor Motor Motor Motor
5.65.65.65.6 High-Frequency High-Frequency High-Frequency High-Frequency
This This This This command command command command isisisisused used used used totototo open open open open orororor close close close close thethethethe high-frequency high-frequency high-frequency high-frequency Pulse Pulse Pulse Pulse
power, power, power, power, when when when when ititititisisisisopened, opened, opened, opened, thethethethe main main main main interface interface interface interface will will will will display display display display with with with with thethethethe redredredred pulse pulse pulse pulse asasasas follows follows follows follows
(Figure (Figure (Figure (Figure 5.14), 5.14), 5.14), 5.14), otherwise otherwise otherwise otherwise will will will will display display display display thethethethe gray gray gray gray pulse. pulse. pulse. pulse.

38
Figure Figure Figure Figure 5.14: 5.14: 5.14: 5.14: High-Frequency High-Frequency High-Frequency High-Frequency
5.5.5.5.7777Wire Wire Wire Wire
This This This This command command command command isisisisused used used used totototo open open open open orororor close close close close thethethethe wire, wire, wire, wire, when when when when thethethethe wire wire wire wire isisisis
opened, opened, opened, opened, thethethethe main main main main interface interface interface interface will will will will display display display display with with with with thethethethe redredredred text text text text asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.15), 5.15), 5.15), 5.15),
otherwise otherwise otherwise otherwise will will will will display display display display thethethethe gray gray gray gray text. text. text. text.
Figure Figure Figure Figure 5.15: 5.15: 5.15: 5.15: Wire Wire Wire Wire
5.5.5.5.8888Pump Pump Pump Pump
This This This This command command command command isisisisused used used used totototo open open open open orororor close close close close thethethethe pump, pump, pump, pump, when when when when thethethethe pump pump pump pump
isisisisopened, opened, opened, opened, thethethethe main main main main interface interface interface interface will will will will display display display display with with with with thethethethe redredredred text text text text asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.16), 5.16), 5.16), 5.16), else else else else
will will will will notnotnotnot display display display display thethethethe gray gray gray gray text. text. text. text.
Figure Figure Figure Figure 5.16:Pump 5.16:Pump 5.16:Pump 5.16:Pump
5.5.5.5.9999Gapping Gapping Gapping Gapping
This This This This command command command command isisisis used used used used totototo modify modify modify modify thethethethe stability stability stability stability ofofofof processing. processing. processing. processing. When When When When processing processing processing processing
thickness thickness thickness thickness workpiece, workpiece, workpiece, workpiece, thethethethe processing processing processing processing will will will will notnotnotnot stability, stability, stability, stability,
addaddaddadd thethethethe value, value, value, value, will will will will make make make make thethethethe processing processing processing processing stability, stability, stability, stability, click click click click mouse mouse mouse mouse left left left left keykeykeykey onononon thethethethe display display display display
distance distance distance distance ofofofof thethethethe number, number, number, number, will will will will display display display display thethethethe dialog dialog dialog dialog (Figure (Figure (Figure (Figure 5.17) 5.17) 5.17) 5.17)
Figure Figure Figure Figure 5.17: 5.17: 5.17: 5.17: Trace Trace Trace Trace Setting Setting Setting Setting
CanCanCanCan modify modify modify modify thethethethe track track track track value value value value quickly, quickly, quickly, quickly, thethethethe range range range range ofofofof thethethethe modification modification modification modification isisisisbetween between between between 0000andandandand
500; 500; 500; 500; click click click click mouse mouse mouse mouse left left left left keykeykeykey orororor totototo micro-modify. micro-modify. micro-modify. micro-modify.

39
5.5.5.5.10101010 Incising Incising Incising Incising Limit Limit Limit Limit Speed Speed Speed Speed
This This This This function function function function isisisisused used used used totototo setsetsetset thethethethe maxmaxmaxmax speed speed speed speed ofofofof incising incising incising incising (Figure (Figure (Figure (Figure 5.18), 5.18), 5.18), 5.18), unit: unit: unit: unit: step step step step perperperper
second second second second (Hz); (Hz); (Hz); (Hz);
Figure Figure Figure Figure 5.18: 5.18: 5.18: 5.18: Incising Incising Incising Incising Limit Limit Limit Limit Speed Speed Speed Speed
5.5.5.5.11111111 Empty Empty Empty Empty Walking Walking Walking Walking Limit Limit Limit Limit Speed Speed Speed Speed
This This This This function function function function isisisisused used used used totototo setsetsetset thethethethe maxmaxmaxmax speed speed speed speed ofofofof empty empty empty empty walking walking walking walking (Figure (Figure (Figure (Figure 5.19), 5.19), 5.19), 5.19), unit: unit: unit: unit: step step step step
perperperper second second second second (Hz); (Hz); (Hz); (Hz);
Figure Figure Figure Figure 5.19: 5.19: 5.19: 5.19: Empty Empty Empty Empty Walking Walking Walking Walking Limit Limit Limit Limit Speed Speed Speed Speed
5.5.5.5.12121212 Manual Manual Manual Manual Function Function Function Function
1111）Move Move Move Move Axes Axes Axes Axes (Figure (Figure (Figure (Figure 5.20) 5.20) 5.20) 5.20)

40
Figure Figure Figure Figure 5.20: 5.20: 5.20: 5.20: Move Move Move Move Axes Axes Axes Axes
Moving Moving Moving Moving
XXXXaxis: axis: axis: axis: thethethethe distance distance distance distance ofofofof XXXXdirection direction direction direction moving, moving, moving, moving, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
YYYYaxis: axis: axis: axis: thethethethe distance distance distance distance ofofofofYYYYdirection direction direction direction moving, moving, moving, moving, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
UUUUaxis: axis: axis: axis: thethethethe distance distance distance distance ofofofof UUUUdirection direction direction direction moving, moving, moving, moving, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
VVVVaxis: axis: axis: axis: thethethethe distance distance distance distance ofofofof VVVVdirection direction direction direction moving, moving, moving, moving, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
(Attention: (Attention: (Attention: (Attention: Input Input Input Input thethethethe plus plus plus plus will will will will move move move move totototo positive, positive, positive, positive, otherwise otherwise otherwise otherwise input input input input negative negative negative negative will will will will move move move move totototo
negative) negative) negative) negative)
Appoint Appoint Appoint Appoint Speed: Speed: Speed: Speed: move move move move thethethethe special special special special steps steps steps steps ofofofof anyanyanyany axis axis axis axis with with with with fixed fixed fixed fixed speed, speed, speed, speed, unit: unit: unit: unit: steps steps steps steps
perperperper second; second; second; second;
Trace Trace Trace Trace with with with with opening opening opening opening thethethethe Pulse-Power: Pulse-Power: Pulse-Power: Pulse-Power: Move Move Move Move thethethethe specify specify specify specify steps steps steps steps ofofofof anyanyanyany axis axis axis axis with with with with
incising; incising; incising; incising;
Start: Start: Start: Start: After After After After setting setting setting setting thethethethe parameter, parameter, parameter, parameter, click click click click thethethethe button button button button totototo begin begin begin begin moving; moving; moving; moving;
Stop: Stop: Stop: Stop: click click click click thethethethe button button button button totototo finish finish finish finish thethethethe motion motion motion motion during during during during thethethethe moving; moving; moving; moving;
GoGoGoGo ToToToTo Origin: Origin: Origin: Origin: back back back back totototo thethethethe origin origin origin origin with with with with thethethethe shortest shortest shortest shortest path; path; path; path;
Clear Clear Clear Clear XYUV XYUV XYUV XYUV ToToToTo Zero: Zero: Zero: Zero: clear clear clear clear thethethethe coordinate coordinate coordinate coordinate ofofofof XXXX,Y,Y,Y,Y ,U,,U,,U,,U, VVVVaxes axes axes axes inininin thethethethe main main main main interface interface interface interface ;;;;
Usage Usage Usage Usage method: method: method: method:
1）Empty Empty Empty Empty Walking Walking Walking Walking Move: Move: Move: Move: Input Input Input Input thethethethe moving moving moving moving distance distance distance distance inininin thethethethe correspondin correspondin correspondin correspondin ggggmoving moving moving moving
direction, direction, direction, direction, andandandand setsetsetset walking walking walking walking speed speed speed speed (default (default (default (default asasasas 100100100100 Hz), Hz), Hz), Hz), click click click click thethethethe ““““Start Start Start Start ””””button, button, button, button, move move move move thethethethe
special special special special distance distance distance distance bybybyby special special special special direction, direction, direction, direction, user user user user cancancancan click click click click thethethethe ““““Stop Stop Stop Stop ””””totototo finish finish finish finish thethethethe motion motion motion motion
during during during during thethethethe moving; moving; moving; moving;
2）Moving Moving Moving Moving with with with with Incising: Incising: Incising: Incising: click click click click thethethethe ““““Track Track Track Track Step Step Step Step ””””,,,,system system system system will will will will auto auto auto auto open open open open thethethethe
high-frequency, high-frequency, high-frequency, high-frequency, incising incising incising incising thethethethe special special special special distance distance distance distance bybybyby special special special special direction, direction, direction, direction, user user user user cancancancan click click click click thethethethe
““““Stop Stop Stop Stop ””””button button button button totototo finish finish finish finish thethethethe moving moving moving moving during during during during thethethethe incising; incising; incising; incising;

41
3）GoGoGoGo ToToToTo Origin: Origin: Origin: Origin: when when when when machine machine machine machine stop, stop, stop, stop, user user user user cancancancan click click click click thethethethe ““““Back Back Back Back Origin Origin Origin Origin ””””button, button, button, button,
system system system system will will will will gogogogo back back back back totototo thethethethe coordinate coordinate coordinate coordinate origin origin origin origin bybybyby thethethethe shortest shortest shortest shortest path. path. path. path.
4）Clear Clear Clear Clear XYUV XYUV XYUV XYUV ToToToTo Zero: Zero: Zero: Zero: click click click click thethethethe button, button, button, button, user user user user cancancancan clear clear clear clear thethethethe coordinate coordinate coordinate coordinate ofofofof XXXX、YYYY、
UUUU、VVVVfour four four four axes axes axes axes inininin thethethethe main main main main interface interface interface interface ;;;;
2）Find Find Find Find Center Center Center Center (Figure (Figure (Figure (Figure 5.21) 5.21) 5.21) 5.21)
Figure Figure Figure Figure 5.21: 5.21: 5.21: 5.21: Find Find Find Find Center Center Center Center
Method Method Method Method ofofofofmoving: moving: moving: moving:
X-Axis: X-Axis: X-Axis: X-Axis: include include include include ““““First First First First X-Forward, X-Forward, X-Forward, X-Forward, Next Next Next Next X-Back X-Back X-Back X-Back ””””andandandand ““““First First First First X-Back, X-Back, X-Back, X-Back, Next Next Next Next
X-Forward X-Forward X-Forward X-Forward ””””;;;;
Y-Axis: Y-Axis: Y-Axis: Y-Axis: include include include include ““““First First First First Y-Forward, Y-Forward, Y-Forward, Y-Forward, Next Next Next Next Y-Back Y-Back Y-Back Y-Back ””””andandandand ““““First First First First Y-Back, Y-Back, Y-Back, Y-Back, Next Next Next Next
Y-Forward Y-Forward Y-Forward Y-Forward ””””;;;;;;;;
Step Step Step Step Speed: Speed: Speed: Speed: move move move move bybybyby special special special special speed, speed, speed, speed, unit: unit: unit: unit: step step step step perperperper second second second second (Hz); (Hz); (Hz); (Hz);
Start: Start: Start: Start: After After After After setting setting setting setting parameters, parameters, parameters, parameters, click click click click thethethethe button button button button totototo start start start start finding finding finding finding center; center; center; center;
Stop: Stop: Stop: Stop: click click click click thethethethe button button button button totototo finish finish finish finish finding finding finding finding center center center center during during during during thethethethe process process process process ofofofof thethethethe find find find find
center; center; center; center;
Usage Usage Usage Usage method: method: method: method: Select Select Select Select step step step step order order order order inininin ““““X-Axis X-Axis X-Axis X-Axis ””””orororor ““““Y-Axis Y-Axis Y-Axis Y-Axis ””””,,,,andandandand setsetsetset step step step step speed speed speed speed
(default (default (default (default 100Hz), 100Hz), 100Hz), 100Hz), click click click click ““““Start Start Start Start ””””totototo start start start start find find find find center, center, center, center, user user user user cancancancan click click click click ““““Stop Stop Stop Stop ””””button button button button totototo
finish finish finish finish finding finding finding finding center center center center during during during during thethethethe process process process process ofofofof thethethethe find find find find center, center, center, center, otherwise otherwise otherwise otherwise machine machine machine machine will will will will
stop stop stop stop until until until until find find find find thethethethe center. center. center. center.
3333）Auto-Find-Side Auto-Find-Side Auto-Find-Side Auto-Find-Side (Figure (Figure (Figure (Figure 5.22) 5.22) 5.22) 5.22)

42
Figure Figure Figure Figure 5.22: 5.22: 5.22: 5.22: Find Find Find Find Side Side Side Side
Target Target Target Target Position: Position: Position: Position:
X-Dir: X-Dir: X-Dir: X-Dir: thethethethe most most most most distance distance distance distance totototo find find find find side side side side atatatat XXXXdirection, direction, direction, direction, unit: unit: unit: unit: millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Y-Dir: Y-Dir: Y-Dir: Y-Dir: thethethethe most most most most distance distance distance distance totototo find find find find side side side side atatatatYYYYdirection, direction, direction, direction, unit unit unit unit ::::millimeter millimeter millimeter millimeter (mm); (mm); (mm); (mm);
Speed: Speed: Speed: Speed: find find find find side side side side bybybyby special special special special speed, speed, speed, speed, unit: unit: unit: unit: step step step step perperperper second second second second (Hz); (Hz); (Hz); (Hz);
Distance: Distance: Distance: Distance: thethethethe most most most most find-side find-side find-side find-side distance, distance, distance, distance, machine machine machine machine will will will will stop stop stop stop when when when when gogogogo totototo thethethethe
distance; distance; distance; distance;
Find-side Find-side Find-side Find-side parameters parameters parameters parameters (X-Dir, (X-Dir, (X-Dir, (X-Dir, Y-Dir Y-Dir Y-Dir Y-Dir andandandand Speed) Speed) Speed) Speed) cancancancan bebebebe directly directly directly directly inputted inputted inputted inputted orororor auto auto auto auto
-calc -calc -calc -calc through through through through specified specified specified specified distance distance distance distance andandandand direction; direction; direction; direction;
Start: Start: Start: Start: After After After After setting setting setting setting parameters, parameters, parameters, parameters, click click click click thethethethe button button button button totototo start start start start finding finding finding finding side; side; side; side;
Stop: Stop: Stop: Stop: click click click click thethethethe button button button button totototo finish finish finish finish finding finding finding finding side side side side during during during during thethethethe find-side; find-side; find-side; find-side;
Usage Usage Usage Usage method: method: method: method: Input Input Input Input thethethethe most most most most distance distance distance distance ofofofof find-side find-side find-side find-side inininin thethethethe special special special special direction direction direction direction (if(if(if(if
machine machine machine machine cann cann cann cann ’’’’ttttfind find find find side side side side when when when when move move move move thethethethe distance, distance, distance, distance, will will will will stop), stop), stop), stop), setsetsetset step step step step speed, speed, speed, speed, click click click click
““““Start Start Start Start ””””totototo start start start start finding finding finding finding side, side, side, side, user user user user cancancancan click click click click ““““stop stop stop stop ””””totototo finish finish finish finish finding finding finding finding side side side side during during during during thethethethe
find-side, find-side, find-side, find-side, otherwise otherwise otherwise otherwise machine machine machine machine will will will will stop stop stop stop until until until until find find find find thethethethe side; side; side; side;
4）Manual-Find-Side Manual-Find-Side Manual-Find-Side Manual-Find-Side (Figure (Figure (Figure (Figure 5.23) 5.23) 5.23) 5.23)

43
Figure Figure Figure Figure 5.23: 5.23: 5.23: 5.23: Manual Manual Manual Manual Find-Side Find-Side Find-Side Find-Side Alarm Alarm Alarm Alarm
Alarming: Alarming: Alarming: Alarming: when when when when user user user user select select select select Manual-Find-Side, Manual-Find-Side, Manual-Find-Side, Manual-Find-Side, select select select select ““““Alarming Alarming Alarming Alarming when when when when silk silk silk silk
touch touch touch touch workpiece workpiece workpiece workpiece ””””,,,,system system system system will will will will alarm alarm alarm alarm when when when when molybdenum molybdenum molybdenum molybdenum silk silk silk silk touch touch touch touch thethethethe workpiece, workpiece, workpiece, workpiece,
otherwise otherwise otherwise otherwise system system system system will will will will notnotnotnot alarm; alarm; alarm; alarm;
InInInIn addition, addition, addition, addition, user user user user cancancancan open open open open orororor close close close close silk, silk, silk, silk, high high high high frequency, frequency, frequency, frequency, motor motor motor motor etcetcetcetc inininin thethethethe manual manual manual manual
function, function, function, function, cancancancan test test test test thethethethe function function function function ofofofof shutdown; shutdown; shutdown; shutdown;
5.15.15.15.1 3333Pitch Pitch Pitch Pitch Correct Correct Correct Correct
Click Click Click Click button, button, button, button, will will will will display display display display thethethethe dialog dialog dialog dialog asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.24): 5.24): 5.24): 5.24):

44
Figure Figure Figure Figure 5.24: 5.24: 5.24: 5.24: Pitch Pitch Pitch Pitch Correct Correct Correct Correct
1111）Pitch Pitch Pitch Pitch correct correct correct correct table: table: table: table: when when when when enable enable enable enable thethethethe function function function function ofofofof thethethethe pitch pitch pitch pitch correct, correct, correct, correct, correct correct correct correct thethethethe
pitch pitch pitch pitch error error error error ofofofof thethethethe machine machine machine machine based based based based onononon this this this this table; table; table; table;
Serial Serial Serial Serial Number Number Number Number (n)(n)(n)(n) ::::No.No.No.No. nnnnpoint point point point
Encoder: Encoder: Encoder: Encoder: thethethethe Encoder Encoder Encoder Encoder coordinate coordinate coordinate coordinate ofofofof No.No.No.No. n,n,n,n, Encoder Encoder Encoder Encoder coordinate coordinate coordinate coordinate ====nnnn****
distance; distance; distance; distance;
[X+]: [X+]: [X+]: [X+]: thethethethe read read read read number number number number ofofofof thethethethe laser laser laser laser interferometer interferometer interferometer interferometer when when when when X-axis X-axis X-axis X-axis positive positive positive positive
through through through through thethethethe No.No.No.No. nnnncoordinate. coordinate. coordinate. coordinate.
[X-]: [X-]: [X-]: [X-]: thethethethe read read read read number number number number ofofofof thethethethe laser laser laser laser interferometer interferometer interferometer interferometer when when when when X-axis X-axis X-axis X-axis negative negative negative negative
through through through through thethethethe No.No.No.No. nnnncoordinate. coordinate. coordinate. coordinate.
[Y+]: [Y+]: [Y+]: [Y+]: thethethethe read read read read number number number number ofofofof thethethethe laser laser laser laser interferometer interferometer interferometer interferometer when when when when Y-axis Y-axis Y-axis Y-axis positive positive positive positive
through through through through thethethethe No.No.No.No. nnnncoordinate. coordinate. coordinate. coordinate.
[Y-]: [Y-]: [Y-]: [Y-]: thethethethe read read read read number number number number ofofofof thethethethe laser laser laser laser interferometer interferometer interferometer interferometer when when when when Y-axis Y-axis Y-axis Y-axis negative negative negative negative
through through through through thethethethe No.No.No.No. nnnncoordinate. coordinate. coordinate. coordinate.
2222）Manual Manual Manual Manual find find find find thethethethe limit limit limit limit switch switch switch switch ofofofof machine machine machine machine origin: origin: origin: origin: Control Control Control Control XXXXaxis axis axis axis orororor YYYYaxis axis axis axis totototo
move, move, move, move, user user user user cancancancan setsetsetset thethethethe auto auto auto auto stop stop stop stop when when when when find find find find thethethethe travel travel travel travel switch switch switch switch ofofofof thethethethe machine machine machine machine
origin, origin, origin, origin, this this this this function function function function isisisis used used used used totototo manual manual manual manual find find find find thethethethe travel travel travel travel switch switch switch switch ofofofof thethethethe machine machine machine machine
origin; origin; origin; origin;
Distance Distance Distance Distance (mm) (mm) (mm) (mm) ::::thethethethe most most most most distance distance distance distance ofofofof X-axis X-axis X-axis X-axis orororor Y-axis Y-axis Y-axis Y-axis moving, moving, moving, moving, machine machine machine machine will will will will
stop stop stop stop when when when when move move move move thethethethe distance; distance; distance; distance;
Speed Speed Speed Speed (Hz): (Hz): (Hz): (Hz): thethethethe most most most most step step step step speed speed speed speed ofofofof moving, moving, moving, moving, unit: unit: unit: unit: HzHzHzHz
X+,X+,X+,X+, X-:X-:X-:X-: select select select select thethethethe step step step step direction direction direction direction ofofofof X-axis; X-axis; X-axis; X-axis;
Y+,Y+,Y+,Y+, Y-:Y-:Y-:Y-: select select select select thethethethe step step step step direction direction direction direction ofofofofY-axis; Y-axis; Y-axis; Y-axis;
Brake Brake Brake Brake when when when when pressing pressing pressing pressing thethethethe limit limit limit limit switch: switch: switch: switch: After After After After selecting selecting selecting selecting it,it,it,it, machine machine machine machine will will will will auto auto auto auto
stop stop stop stop when when when when check check check check thethethethe limit limit limit limit switch switch switch switch isisisispressed; pressed; pressed; pressed;
Brake Brake Brake Brake when when when when popping popping popping popping thethethethe limit limit limit limit switch: switch: switch: switch: After After After After select select select select it,it,it,it, machine machine machine machine will will will will auto auto auto auto stop stop stop stop
when when when when check check check check thethethethe limit limit limit limit switch switch switch switch isisisispopped; popped; popped; popped;
Pitch correct Table
Manual-Find Machine Origi n
Auto-Back to Origin
Calc
Machine
Origin
Edit Screw Table

45
3）Auto Auto Auto Auto Return Return Return Return Machine Machine Machine Machine Origin: Origin: Origin: Origin:
Speed Speed Speed Speed 1(Hz): 1(Hz): 1(Hz): 1(Hz): thethethethe moving moving moving moving speed speed speed speed isisisis used used used used totototo find find find find thethethethe travel travel travel travel switch switch switch switch ofofofof thethethethe
machine machine machine machine origin; origin; origin; origin;
Speed Speed Speed Speed 2(Hz): 2(Hz): 2(Hz): 2(Hz): After After After After finding finding finding finding thethethethe travel travel travel travel switch, switch, switch, switch, thethethethe moving moving moving moving speed speed speed speed isisisisused used used used totototo
find find find find encoder encoder encoder encoder zero; zero; zero; zero;
Cycle Cycle Cycle Cycle (mm): (mm): (mm): (mm): thethethethe pitch pitch pitch pitch ofofofof thethethethe lead lead lead lead screw; screw; screw; screw;
4444）Calculate Calculate Calculate Calculate Machine Machine Machine Machine Origin: Origin: Origin: Origin:
Clear: Clear: Clear: Clear: clear clear clear clear thethethethe coordination coordination coordination coordination ofofofof encoder, encoder, encoder, encoder, machine machine machine machine andandandand encoder encoder encoder encoder zero; zero; zero; zero;
X-Calc: X-Calc: X-Calc: X-Calc: calculate calculate calculate calculate thethethethe XXXXaxis axis axis axis origin origin origin origin coordinate coordinate coordinate coordinate based based based based onononon thethethethe coordinate coordinate coordinate coordinate ofofofof XXXX
axis axis axis axis encoder encoder encoder encoder andandandand encoder encoder encoder encoder zero; zero; zero; zero;
Y-Calc: Y-Calc: Y-Calc: Y-Calc: calculate calculate calculate calculate thethethethe YYYYaxis axis axis axis origin origin origin origin coordinate coordinate coordinate coordinate based based based based onononon thethethethe coordinate coordinate coordinate coordinate ofofofof YYYY
axis axis axis axis encoder encoder encoder encoder andandandand encoder encoder encoder encoder zero; zero; zero; zero;
5555）Edit Edit Edit Edit Screw-Error Screw-Error Screw-Error Screw-Error Table: Table: Table: Table:
Set: Set: Set: Set: Generate Generate Generate Generate thethethethe origin origin origin origin date date date date ofofofof thethethethe pitch pitch pitch pitch correct correct correct correct table table table table based based based based onononon thethethethe Serial Serial Serial Serial
Number Number Number Number andandandand thethethethe distance; distance; distance; distance;
Reset: Reset: Reset: Reset: Reset Reset Reset Reset thethethethe content content content content ofofofof thethethethe pitch pitch pitch pitch correct correct correct correct table; table; table; table;
Save: Save: Save: Save: Save Save Save Save thethethethe current current current current modified modified modified modified date date date date totototo thethethethe pitch pitch pitch pitch correct correct correct correct table; table; table; table;
Save Save Save Save as:as:as:as: totototoback back back back upupupup thethethethe current current current current pitch pitch pitch pitch correct correct correct correct table; table; table; table;
Open: Open: Open: Open: open open open open aaaabeing being being being pitch pitch pitch pitch correct correct correct correct table; table; table; table;
Modify Modify Modify Modify Pitch Pitch Pitch Pitch correct correct correct correct table: table: table: table: select select select select oneoneoneone item item item item need need need need bebebebe modified modified modified modified inininin thethethethe pitch pitch pitch pitch
correct correct correct correct table, table, table, table, cancancancan edit edit edit edit thethethethe data data data data ofofofof ““““XXXXpositive positive positive positive ””””,,,,““““XXXXnegative negative negative negative ””””,,,,““““YYYYpositive positive positive positive ””””,,,,““““YYYY
negative negative negative negative ””””,,,,click click click click thethethethe ““““Save Save Save Save ””””button button button button totototo finish finish finish finish thethethethe modification. modification. modification. modification.
5.15.15.15.1 4444Servo Servo Servo Servo Debug Debug Debug Debug
Click Click Click Click button, button, button, button, will will will will display display display display thethethethe dialog dialog dialog dialog asasasas follows follows follows follows (Figure (Figure (Figure (Figure 5.25): 5.25): 5.25): 5.25):

46
Figure Figure Figure Figure 5.25: 5.25: 5.25: 5.25: Servo Servo Servo Servo Debug Debug Debug Debug
X-follow: X-follow: X-follow: X-follow: Input Input Input Input thethethethe X-axis X-axis X-axis X-axis absolutely absolutely absolutely absolutely coordinate coordinate coordinate coordinate ofofofof thethethethe object object object object distance, distance, distance, distance, click click click click
thethethethe button, button, button, button, will will will will move move move move totototo thethethethe object object object object distance; distance; distance; distance;
Y-follow: Y-follow: Y-follow: Y-follow: Input Input Input Input thethethethe Y-axis Y-axis Y-axis Y-axis absolutely absolutely absolutely absolutely coordinate coordinate coordinate coordinate ofofofof thethethethe object object object object distance, distance, distance, distance, click click click click thethethethe
button, button, button, button, will will will will move move move move totototo thethethethe object object object object distance; distance; distance; distance;
X-moving: X-moving: X-moving: X-moving: Input Input Input Input thethethethe distance distance distance distance ofofofof thethethethe XXXXaxis axis axis axis relatively relatively relatively relatively current current current current coordinate coordinate coordinate coordinate ofofofof thethethethe
object object object object distance, distance, distance, distance, click click click click thethethethe button, button, button, button, will will will will move move move move totototo thethethethe object object object object distance; distance; distance; distance;
Y-moving: Y-moving: Y-moving: Y-moving: Input Input Input Input thethethethe distance distance distance distance ofofofof thethethethe YYYYaxis axis axis axis relatively relatively relatively relatively current current current current coordinate coordinate coordinate coordinate ofofofof thethethethe
object object object object distance, distance, distance, distance, click click click click thethethethe button, button, button, button, will will will will move move move move totototo thethethethe object object object object distance; distance; distance; distance;
5.15.15.15.1 5555High-Frequency High-Frequency High-Frequency High-Frequency Settings Settings Settings Settings
Click Click Click Click mouse mouse mouse mouse left left left left keykeykeykey onononon ““““Process Process Process Process parameter parameter parameter parameter display display display display area area area area ””””,,,,will will will will display display display display
,,,,click click click click thethethethe ““““High-Frequency High-Frequency High-Frequency High-Frequency settings settings settings settings ””””,,,,will will will will display display display display thethethethe dialog dialog dialog dialog asasasas
follows follows follows follows (Figure (Figure (Figure (Figure 5.26), 5.26), 5.26), 5.26),
Figure Figure Figure Figure 5.26: 5.26: 5.26: 5.26: Technics Technics Technics Technics Parameters Parameters Parameters Parameters
InInInIn this this this this interface, interface, interface, interface, user user user user cancancancan modify modify modify modify anyanyanyany parameters, parameters, parameters, parameters, operate operate operate operate method: method: method: method: select select select select oneoneoneone
parameter parameter parameter parameter item item item item need need need need bebebebe modified modified modified modified inininin thethethethe upper upper upper upper list, list, list, list, modify modify modify modify ititititinininin parameter parameter parameter parameter 1,1,1,1,then then then then click click click click
thethethethe ““““Update Update Update Update ””””button button button button totototo update update update update thethethethe modified modified modified modified parameters parameters parameters parameters totototo thethethethe technics technics technics technics parameters, parameters, parameters, parameters,
click click click click thethethethe ““““OKOKOKOK ””””totototo finish finish finish finish thethethethe setting; setting; setting; setting;

47
5.15.15.15.1 6666About About About About
Figure Figure Figure Figure 5.27: 5.27: 5.27: 5.27: About About About About
Version: Version: Version: Version:
Software Software Software Software Version: Version: Version: Version: control control control control software software software software version version version version number, number, number, number, example: example: example: example: AutoCut AutoCut AutoCut AutoCut 1.0; 1.0; 1.0; 1.0;
Hardware Hardware Hardware Hardware Version: Version: Version: Version: motion motion motion motion control control control control card card card card version version version version number, number, number, number, example: example: example: example:
WedmHs20070702 WedmHs20070702 WedmHs20070702 WedmHs20070702 －001001001001 ；
Register: Register: Register: Register:
Production Production Production Production Serial Serial Serial Serial Number: Number: Number: Number: motion motion motion motion control control control control card card card card unique unique unique unique serial serial serial serial number; number; number; number;
Production Production Production Production Register Register Register Register Code: Code: Code: Code: Production Production Production Production ’’’’ssssregister register register register code; code; code; code;
Attention: Attention: Attention: Attention: Tryout Tryout Tryout Tryout client, client, client, client, need need need need getgetgetget production production production production register register register register code code code code from from from from franchiser, franchiser, franchiser, franchiser, otherwise otherwise otherwise otherwise
cancancancan useuseuseuse thethethethe production production production production inininin thethethethe special special special special time, time, time, time, thethethethe production production production production will will will will bebebebe locked locked locked locked when when when when thethethethe time time time time
coming coming coming coming andandandand cann cann cann cann ’’’’ttttbebebebe used used used used until until until until getgetgetget thethethethe corresponding corresponding corresponding corresponding register register register register code, code, code, code, Tryout Tryout Tryout Tryout client client client client cancancancan
seeseeseesee thethethethe obvious obvious obvious obvious redredredred symbol symbol symbol symbol ““““TRYTRYTRYTRY ””””under under under under thethethethe graphic graphic graphic graphic area area area area inininin thethethethe control control control control software software software software main main main main
interface. interface. interface. interface.
Register Register Register Register method: method: method: method: User User User User send send send send thethethethe production production production production serial serial serial serial number number number number (example: (example: (example: (example:
1000-0000-0000-0000) 1000-0000-0000-0000) 1000-0000-0000-0000) 1000-0000-0000-0000) totototo franchiser, franchiser, franchiser, franchiser, getgetgetget aaaabunch bunch bunch bunch ofofofof register register register register code code code code (example: (example: (example: (example:
abcd-abcd-abcd-abcd-abcd), abcd-abcd-abcd-abcd-abcd), abcd-abcd-abcd-abcd-abcd), abcd-abcd-abcd-abcd-abcd), user user user user maymaymaymay copy copy copy copy orororor manual manual manual manual input input input input thethethethe register register register register code code code code totototo thethethethe
editing editing editing editing frame frame frame frame inininin thethethethe about about about about interface interface interface interface
(Figure (Figure (Figure (Figure 5.27), 5.27), 5.27), 5.27), click click click click thethethethe ““““OKOKOKOK ””””button button button button totototo finish finish finish finish thethethethe register. register. register. register.
Attention: Attention: Attention: Attention: Register Register Register Register code code code code include include include include ““““0~90~90~90~9 ””””,,,,symbol symbol symbol symbol ‘–‘‘–‘‘–‘‘–‘ ,,,,letter letter letter letter a~fa~fa~fa~f (not (not (not (not match match match match case) case) case) case) three three three three
types. types. types. types.

48

About This Presentation

Slide Content

Tags

Categories

Download

Quick Actions

Statistics

Related Slideshows

Auto cutmanual

About This Presentation

Slide Content

Slide 1

Slide 2

Slide 3

Slide 4

Slide 5

Slide 6

Slide 7

Slide 8

Slide 9

Slide 10

Slide 11

Slide 12

Slide 13

Slide 14

Slide 15

Slide 16

Slide 17

Slide 18

Slide 19

Slide 20

Slide 21

Slide 22

Slide 23

Slide 24

Slide 25

Slide 26

Slide 27

Slide 28

Slide 29

Slide 30

Slide 31

Slide 32

Slide 33

Slide 34

Slide 35

Slide 36

Slide 37

Slide 38

Slide 39

Slide 40

Slide 41

Slide 42

Slide 43

Slide 44

Slide 45

Slide 46

Slide 47

Slide 48

Slide 49

Slide 50

Tags

Categories

Download

Quick Actions

Statistics

Related Slideshows

Pray For The Peace Of Jerusalem and You Will Prosper

Don_t_Waste_Your_Life_God.....powerpoint

VILLASUR_FACTORS_TO_CONSIDER_IN_PLATING_SALAD_10-13.pdf

Fertility awareness methods for women in the society

Chapter 5 Arithmetic Functions Computer Organisation and Architecture

syakira bhasa inggris (1) (1).pptx.......